BRENNEN

Industries / Consumer goods / Consumer appliances

Sheet metal and molding

Making the outer shell, drum, tub, door and inner liner of an appliance from sheet steel and plastic, and filling the walls with insulation.

6

Milestones achieved, from 1931 to 2017.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1931

    A lighter insulation

    GE developed an insulating material for refrigerator walls called Thermocraft that weighed 2.5 pounds per cubic foot (about 40 kg/m³), against about 12 pounds (about 190 kg/m³) for the standard insulation of the day. ASSEMBLY reports that competitors paid GE royalties for years to use it.

    assemblymag.com

    Credit

    General Electric

  2. 1980s

    Foam that stiffens the cabinet

    Refrigerators moved from fiberglass to polyurethane foam insulation, which ASSEMBLY says became widely used in the mid-1980s. The foam is injected as a liquid between the steel outer case and the plastic (polystyrene) liner and expands more than 30 times its volume in about 30 seconds, filling the wall and gluing case and liner into one stiff panel. Fiberglass had let water in, where it froze into cold spots, and its walls flexed when pressed. Bayer MaterialScience told ASSEMBLY that the better insulation let makers thin the walls and give more space inside at the same outside size.

    assemblymag.com

    Credit

    no single maker; ASSEMBLY's account draws on the foam suppliers Bayer MaterialScience and BASF

  3. 1983

    A dishwasher tub of plastic

    GE's third-generation dishwasher had an all-plastic body, which ASSEMBLY calls an industry first, in place of a metal tub. It was designed together with a new automated line at Appliance Park in Louisville, Kentucky, which joined plastic parts with ultrasonic welders (machines that melt plastic together with high-frequency vibration) and made metal parts on stamping presses placed beside the line. GE reported that service calls on its dishwashers fell by half.

    assemblymag.com

    Credit

    GE Appliances, led by Thomas O. Blunt's advanced production technology group

  4. 1993

    Foam blown with pentane

    Refrigerator foam had been blown (made to expand) with CFC-11, a gas that destroys the ozone layer, according to the International Institute of Refrigeration (IIR). The first Greenfreeze refrigerators, made by Foron in eastern Germany from March 1993 (see Motors and compressors), used a hydrocarbon to blow their foam as well as to cool; the IIR names cyclopentane as the foam's blowing agent. KraussMaffei, a maker of foaming machines, dates the first CFC-free insulating foam based on pentane to the early 1990s, and in 1993 it presented Pentamix, a station that mixes pentane into the foam chemicals at a set concentration.

    iifiir.orgahead.kraussmaffei.com

    Credit

    Foron; KraussMaffei for foaming equipment

  5. 2007

    Vacuum panels win a prize

    A vacuum insulation panel (VIP) is a board of fine powder or glass fibre sealed in a gas-tight foil with the air pumped out, used in fridge walls in place of some of the foam. Matsushita (now Panasonic) used its Vacua panels in National-brand refrigerators, and its U-Vacua panel won the Minister of Economy, Trade and Industry Prize at Japan's 17th Energy Conservation Awards, presented on 31 January 2007. A 2020 review by Verma and Singh of Brunel University found that VIP walls cut fridge energy use by 20 to 30% against foam alone, the IIR reports.

    LessonThe same review found VIPs can cost up to five times as much per unit area as foam, and estimated one glass-fibre panel's life at five years, shorter than the fridge's.

    japanfs.orgiifiir.org

    Credit

    Matsushita Electric Industrial; the prize came from the Energy Conservation Center, Japan

  6. 2017

    Plastic backs after Grenfell

    An expert report for the public inquiry into the 2017 Grenfell Tower fire in London, by Dr John Glover, concluded that the fire most likely started in a Hotpoint FF175BP fridge freezer, at an overheating connector. Whirlpool, which owns Hotpoint, said its own and the UK government's investigations found no fault with the model. The fridge had a plastic back. Which?, the UK consumer group, found plastic backing far more flammable than aluminium laminate or metal, and noted that US-made fridges must have steel backs while UK and European ones may be plastic. It reported that a new refrigeration safety standard would require backs to resist an open flame for 30 seconds; its plastic samples caught fire after 10 seconds, while metal and aluminium laminate backs did not ignite in five minutes.

    LessonThe back of a fridge cabinet is a fire barrier for the foam behind it, not only a cover.

    which.co.ukcoolingpost.com

    Credit

    a failure; tests by Which?, investigation for the Grenfell Tower Inquiry

Watch for

  1. Hydrogen-made steel for appliances

    Salzgitter AG says its SALCOS route, which reduces iron ore with hydrogen in a direct reduction plant and melts it in electric furnaces, will start making steel in the first half of 2027, aiming at a 95% cut in CO2 from steelmaking. Two appliance makers signed up early: BSH (Bosch and Siemens brands) in a January 2023 memorandum for volumes "from 2025", and Miele in a 2022 agreement for delivery "commencing 2025". BSH already uses lower-CO2 steel from Salzgitter's electric-arc route for washing machine mounting brackets at its plant in Łódź, Poland (Eurometal).

    Achieved whenappliances with panels or parts made from SALCOS steel are on sale and an independent verifier confirms the steel's CO2 per tonne.

    salcos.salzgitter-ag.comeurometal.netsalzgitter-flachstahl.de

    Claimed by

    Salzgitter AG, on its SALCOS website as read in November 2026

Open

  1. 01

    Find foam voids by heat

    A tested way to find voids (unfilled pockets) in the foam of refrigerator walls with a phone-attached thermal camera. Make lab panels the way a cabinet is made, steel sheet and plastic liner with foam poured between, plant voids of known size in some, and image them while one side is warm and the other cold. Cut every panel open to confirm. Then scan new fridges in a shop and report what the method flags.

    The brief
    Credit · unclaimed
  2. 02

    Graded photos of enamel defects

    An open, labeled image set of porcelain enamel on steel, the glass coating fused onto oven cavities and range tops, showing its common defects: pinholes, blisters, fish scale (small scale-shaped chips), bare spots and chipping. Include coupons fired on purpose with known faults, so that each defect's cause is known, and photos of scrapped oven parts. Each image is labeled by two people, and a baseline model is trained to find the defects.

    The brief
    Credit · unclaimed

Open 01 · the brief

Find foam voids by heat

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A tested way to find voids (unfilled pockets) in the foam of refrigerator walls with a phone-attached thermal camera. Make lab panels the way a cabinet is made, steel sheet and plastic liner with foam poured between, plant voids of known size in some, and image them while one side is warm and the other cold. Cut every panel open to confirm. Then scan new fridges in a shop and report what the method flags.

Why it is still open

Thermal imaging of foam voids is old. Two Dow Chemical researchers, W.D. Clarke and R.T. Mack, published "Void detection in polyurethane foam using thermographic imaging" in 1986, and CertainTeed's 2022 patent automates void finding in building walls, and Fraunhofer WKI, a German research institute, says heat cameras are already used in the automotive industry to find larger voids in polyurethane foam parts still warm from the mold, where trapped air shows as cooler spots. That patent says infrared images alone do not show whether a cold or warm patch is really a void, and that seams between foam sections get mistaken for voids. No public set of thermal images of appliance cabinets with cut-open confirmation was found on Zenodo, Hugging Face or GitHub (searched November 2026).

api.crossref.orgpatents.google.comvision.fraunhofer.de

Built with what exists

A phone-attached thermal camera (FLIR ONE or Seek Thermal), two-part polyurethane pour foam sold for boat and craft work, steel sheet and polystyrene sheet, a hot plate or ice bath to set the temperature difference, and OpenCV for image analysis.

  1. First step

    Build five panels, two with a planted void the size of a coin and two the size of a palm, and image them at two temperature differences.

  2. Done looks like

    At least 30 panels with 0 to 3 planted voids each, all imaged and then cut open, with a published detection rate for each void size and a false-alarm rate; plus scans of 20 retail fridges with the method's flags reported.

Open 02 · the brief

Graded photos of enamel defects

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open, labeled image set of porcelain enamel on steel, the glass coating fused onto oven cavities and range tops, showing its common defects: pinholes, blisters, fish scale (small scale-shaped chips), bare spots and chipping. Include coupons fired on purpose with known faults, so that each defect's cause is known, and photos of scrapped oven parts. Each image is labeled by two people, and a baseline model is trained to find the defects.

Why it is still open

Camera inspection of enamel was presented at the Porcelain Enamel Institute's 60th Technical Forum ("Real-time image analysis of porcelain enamel defects", Horton, Layne and Evele, Ceramic Engineering and Science Proceedings, vol. 19, no. 5), but no public labeled image set of enamel defects on appliance parts was found on Zenodo, Hugging Face or GitHub (searched November 2026). Public surface-defect sets cover rolled steel and painted car panels, which sibling industry files already treat.

api.crossref.org

Built with what exists

A hobby enameling kiln and craft enamel powders, steel coupons, a phone camera with a ring light, Label Studio (open-source labeling software), and Anomalib (an open-source library of defect-detection models).

  1. First step

    Fire 20 coupons, four for each defect type, cause each fault deliberately and write down how, and photograph them on the day of firing and again a week later.

  2. Done looks like

    At least 2,000 images across five defect types, the agreement rate between the two labelers, and the baseline model's precision and recall on a held-out set of kiln-made coupons whose faults were caused on purpose.