BRENNEN

Industries / Industrial equipment and services / Industrial machinery / Compressors

Efficiency and service

Measuring how much power a compressor uses for the air it delivers, setting minimum standards, auditing whole air systems and keeping machines serviced.

7

Milestones achieved, from 1997 to 2025.

0

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1997

    One program for air systems

    The Compressed Air Challenge was formed in October 1997 as a voluntary collaboration of industrial users, makers, distributors, consultants, state agencies, efficiency groups and utilities, to give product-neutral training on compressed air systems. With the US Department of Energy it wrote the sourcebook "Improving Compressed Air System Performance", whose third edition (2016) carries the trade's rules of thumb: leaks sometimes waste 20 to 30% of a compressor's output, and proactive repair can bring them under 5 to 10%. Its website now describes it as the education foundation of the Compressed Air and Gas Institute (CAGI), the makers' trade association founded in 1915.

    energy.govcompressedairchallenge.orgcagi.org

    Credit

    Compressed Air Challenge sponsors; US Department of Energy

  2. 2006

    Outside tests of rated performance

    The Compressor Distributors Association paid for blind tests of seven makers' 50 hp lubricated rotary screw compressors against their published figures. CAGI then set up a program in which an independent laboratory picks units at random from stock and tests them; Plant Services reported in July 2006 that it was in place, and called it the first time many makers would submit machines to an outside lab. Today two units per participant are tested each year to ISO 1217, the international acceptance test for displacement compressors, and a model that fails twice must be re-rated within 30 days or leave the program.

    plantservices.comcagi.org

    Credit

    Compressor Distributors Association; Compressed Air and Gas Institute

  3. 2009

    China grades its compressors

    China's national standard GB 19153 sets mandatory minimum efficiency values and efficiency grades for displacement air compressors, including piston, oil-injected screw and sliding-vane machines. CLASP, a group that tracks efficiency policy worldwide, records it as adopted in 2009 and revised in 2020. A standards seller lists an earlier 2003 edition, and the 2019 edition took effect on 1 July 2020.

    cprc-clasp.ngochinesestandard.netcodeofchina.com

    Credit

    China's National Development and Reform Commission, which CLASP lists as a responsible agency

  4. 2010

    A standard way to audit

    ASME EA-4-2010 set requirements for carrying out and reporting an energy assessment of a whole compressed air system, from the energy going in to the work done by the air. ISO 11011:2013, which DOE's sourcebook says is based on EA-4, treats every system as three parts: supply, transmission through the pipes, and demand, including waste.

    energy.gov

    Credit

    ASME; International Organization for Standardization

  5. 2013

    Compressors report to service

    Atlas Copco launched SmartLink in April 2013, a program that sends compressor data to the maker and the customer. It offered three levels: maintenance scheduling, email or text alerts on warnings and shutdowns, and energy monitoring for ISO 50001 energy management. Until then service was either planned visits or calls after a breakdown, the launch report said. In November 2026 Atlas Copco said SMARTLINK had more than 300,000 connected units.

    pollutionsolutions-online.comgasworld.com

    Credit

    Atlas Copco

  6. 2019

    A European rule stalls

    The European Commission named compressors a priority in its 2009 to 2011 ecodesign plan and paid the consultancy VHK to study them from 2012 to 2014. A draft went to the Ecodesign Consultation Forum on 23 October 2014, and a 2019 working document would have applied minimum efficiencies to rotary standard air compressor packages of 5 to 1,280 l/s from 1 June 2022. That document put EU standard air compressors' energy use at 57.9 TWh in 2010 and the cost-effective saving at 1.6 TWh by 2030. As read in November 2026, Eurovent's tracking page lists no adopted legal text.

    LessonA rule can be studied for a decade and drafted twice without being adopted; the United States adopted its first standards for rotary air compressors in 2020.

    eco-compressors.euenergimyndigheten.seeurovent.euhpmag.co.uk

    Credit

    European Commission; VHK; Pneurop, the European makers' association, which in 2016 recommended a staged scenario

  7. 2025

    A first US efficiency floor

    DOE's test procedure of January 2017 rates compressors by package isentropic efficiency, the ratio of the ideal power needed to compress the air to the power the whole package draws, measured under ISO 1217:2009 and its 2016 amendment. Its January 2020 standard applies to lubricated rotary air compressors of 10 to 200 hp made in or imported into the United States from 10 January 2025, with levels set from CAGI-verified data sheets. DOE estimated it would save 0.16 quadrillion Btu over the lives of the machines bought in its first 30 years, 0.6% of their energy use. The Appliance Standards Awareness Project calls these the first federal standards for the equipment, and notes that piston, centrifugal and oil-free compressors are excluded. DOE's certification database listed 11,431 compressor models on 19 November 2026. In May 2025 DOE proposed to withdraw its finding that compressors are covered equipment, which would end the test procedure, certification and standard; as read on 19 November 2026, no final rule had been published and the Code of Federal Regulations still carried the standard.

    federalregister.govfederalregister.govappliance-standards.orgregulations.doe.govfederalregister.govecfr.gov

    Credit

    US Department of Energy

Open

  1. 01

    Leak share from controller logs

    A script that reads the logs compressor controllers already keep, finds the hours when production is stopped, and estimates the air lost to leaks by DOE's load and unload timing method or, for other controls, by pressure decay from the receiver. Then a public table of the result for at least 30 plants, with leak flow in liters per second and as a share of compressor capacity, and the window and method used for each.

    The brief
    Credit · unclaimed
  2. 02

    Match certified and published ratings

    A public table that pairs each compressor model in DOE's certification database with the CAGI data sheet its maker publishes, recomputes package isentropic efficiency from the sheet's flow, pressure and power, and flags pairs that differ by more than 2 percentage points.

    The brief
    Credit · unclaimed

Open 01 · the brief

Leak share from controller logs

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A script that reads the logs compressor controllers already keep, finds the hours when production is stopped, and estimates the air lost to leaks by DOE's load and unload timing method or, for other controls, by pressure decay from the receiver. Then a public table of the result for at least 30 plants, with leak flow in liters per second and as a share of compressor capacity, and the window and method used for each.

Why it is still open

The leak figures the trade quotes are rules of thumb. DOE's sourcebook says leaks sometimes waste 20 to 30% of output and that a typical poorly kept plant loses about 20%, but cites no pooled measurement, and its method is a manual timing done at the compressor during a shutdown. The nearest pooled work counts tagged leaks: the Iowa Waste Reduction Center's 2014 pilot found leaks at all 25 small businesses it audited with ultrasonic detectors and estimated that fixing them would save 607,851 kWh in the first year, without a leak share of capacity. An open Python package, leakcalc (November 2026), codes five published methods for the savings from one leak and finds they can differ by a factor of about three, but holds no plant data.

energy.goviwrc.uni.edugithub.comzenodo.org

Built with what exists

Controller data exports, or a clamp-on power logger and a pressure transducer on the receiver; Python; leakcalc's coded methods for turning leak flow into energy; MEASUR's compressed-air module to turn power into flow where there is no flow meter; for checking, a bench with a small piston compressor and receiver held below 2 bar and orifices of known size.

  1. First step

    Write the load and unload calculation against one week of logged data from one plant, and compare it with a manual timing done by the plant's own staff.

  2. Done looks like

    30 plants in the table, each with its stopped window and method; on the bench, estimates within 10% of the known orifice flow at five leak sizes.

Open 02 · the brief

Match certified and published ratings

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public table that pairs each compressor model in DOE's certification database with the CAGI data sheet its maker publishes, recomputes package isentropic efficiency from the sheet's flow, pressure and power, and flags pairs that differ by more than 2 percentage points.

Why it is still open

DOE set its 2020 levels by assuming CAGI data sheets represent the average unit, and left out machines above 200 hp because their sheets are posted voluntarily without outside testing. No comparison of certified values against data sheets was found. DOE's 2025 proposal would end the certification requirement, so the records may not stay public.

federalregister.govregulations.doe.gov

Built with what exists

The database's download button; makers' CAGI data sheet PDFs; pdftotext; an AI model built for pulling fields out of documents, such as Meta's Muse Ember (see the Note "The jobs agents repeat"); Python with the isentropic efficiency formula in DOE's test procedure.

  1. First step

    Download and archive the database this month, then match one maker's first 50 models to its published data sheets by hand.

  2. Done looks like

    1,000 model pairs matched, each with both values and both links; a second person checks 50 rows by hand and agrees on at least 49; every flagged pair listed.