Industries / Mining and materials / Mining and quarrying / Coal mining
Washing and preparation
Washing, also called coal preparation, crushes mined coal and separates it from rock and other waste, so the coal sold carries less ash, the mineral matter that does not burn.
4
Milestones achieved, from 1942 to 2000.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1942
The dense-medium cyclone
Coal is lighter than the rock mined with it, so in a fluid of the right density the coal floats and the rock sinks. The Chance process, which used sand suspended in water, was the first commercial dense-medium process for coal. In 1937 the Dutch State Mines (Staatsmijnen) in Limburg installed a dense-medium separator in a commercial plant, and in 1942 the company patented its dense-medium cyclone, a cone that spins the coal and fluid so the separation happens fast. It licensed the design through its subsidiary Stamicarbon. Coal plants today make the fluid from finely ground magnetite, an iron ore, in water, and engineers at Multotec, a South African cyclone maker, say the cyclone remains the usual choice in coal plants and still looks much like the original design.
Credit
Dutch State Mines (Staatsmijnen)
1972
Buffalo Creek
On 26 February 1972, after days of rain, the highest of three coal-waste dams on the Middle Fork of Buffalo Creek, West Virginia, collapsed. About 132 million gallons of black waste water swept down the hollow; 125 people died, 1,100 were injured and more than 4,000 were left homeless, by the West Virginia State Archives' count. The dams were built of gob, which the archives describe as mine waste of "mine dust, shale, clay, low-quality coal, and other impurities", dumped there since 1957 by the Buffalo Mining Company, a subsidiary of Pittston Coal. Federal, state and citizen commissions found the company had disregarded standard safety practices.
LessonDam No. 3 had already failed in February 1971, and the state cited the company but did not follow up with inspections.
archive.wvculture.orgarchive.wvculture.orgarchive.wvculture.org
Credit
West Virginia State Archives (account)
1982
Ash measured on the belt
Coal quality used to be checked by taking samples to a laboratory, which was too slow to steer a plant. Researchers at the Australian Atomic Energy Commission and later CSIRO, Australia's national science agency, built gauges that measure ash in coal on a moving conveyor by passing low- and high-energy gamma rays through it. In 1982 Mineral Control Instrumentation, now Scantech, was licensed to sell them as Coalscan, and plants could then use the readings to control washing and blending. CSIRO counted more than 400 Coalscan systems installed worldwide in 2011, and the team won the 1992 Australia Prize.
Credit
John Watt, Brian Sowerby and Nick Cutmore (CSIRO); Jim Howarth (commercialization at Amdel and Mineral Control Instrumentation)
2000
The Martin County slurry spill
On 11 October 2000 the Big Branch refuse impoundment near Inez, Kentucky, broke through into an underground mine beneath it. An estimated 306 million gallons of slurry, the fine waste from the coal preparation plant mixed with water, drained into the mine and out of its entrances into Wolf Creek and Coldwater Fork, visibly affecting more than 100 miles of waterways. No one was hurt. The Mine Safety and Health Administration (MSHA) found that Martin County Coal Corporation, a subsidiary of A.T. Massey Coal Company, had not followed its approved plan to seal the impoundment off from the mine workings, so water seeped through and washed out a path. The site had pressed its fine waste into a drier "filter cake" from 1979 and returned to pumping it as slurry behind a dam in 1985. The National Research Council reviewed the risks of coal waste impoundments and the alternatives in a 2002 report.
LessonA slurry pond above old mine workings can drain through them, so the barrier between the two has to be built as approved and checked.
Credit
MSHA (investigation, released 17 October 2001); National Research Council
Watch for
Sorting coal underground by X-ray
At Yangcheng Coal Mine in Shandong, China, MeiTeng Technology, Haina Technology and China University of Mining and Technology built a sorting and backfilling system that works underground. An X-ray and camera sorter picks rock out of coal pieces 40 to 300 mm across, and the rock is used to fill mined-out space. The report gives at least 90% of rock removed and at most 3% of coal lost with the rock, and says about 650,000 t of coal that could not otherwise have been mined has been freed since January 2025. The mine's chief engineer, Wang Xukui, says the system adds US$45 million of revenue a year.
Achieved whenan outside party measures rock removal and coal loss on the running system, for example by float-sink tests on its product and reject streams.
Claimed by
MeiTeng Technology and Yangcheng Mine, reported by International Mining, August 2026
Open
01
An open washability table
A machine-readable table of the washability tests, also called float-sink tests, that the US government ran on coal samples in the 1970s and 1980s. For each sample it gives how much coal, ash and sulfur falls in each density fraction. Add a small tool that predicts clean-coal yield and ash at any cut density.
The briefCredit · unclaimed02
Density-graded sorter test set
A public set of photographs and depth images of coal and rock lumps, with each lump's density measured in a lab, so that sorting methods can be scored against density instead of against a person's judgment of what looks like rock.
The briefCredit · unclaimed
Open 01 · the brief
An open washability table
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A machine-readable table of the washability tests, also called float-sink tests, that the US government ran on coal samples in the 1970s and 1980s. For each sample it gives how much coal, ash and sulfur falls in each density fraction. Add a small tool that predicts clean-coal yield and ash at any cut density.
Why it is still open
The Bureau of Mines report RI 8118 (Cavallaro, 1976) holds complete washability data for 455 coal samples in 329 pages and is sold as a document for $25. OSTI, the US Department of Energy's library, says it has no digital full text of the department's volume on 247 Western samples. The open, machine-readable washability data found for this brief is small or from elsewhere: a 2015 University of Kentucky workbook of preparation-plant samples on the Department of Energy's EDX data site, and a USGS table for coals of the former Soviet Union.
Built with what exists
Library copies or scans of the reports; an OCR tool such as olmOCR; a large language model such as Claude or Gemini to read the tables (see the Note "Seven more flagged"), with every value checked by a person; Python with pandas to build washability curves.
First step
Get RI 8118 through a library or OneMine and key the washability tables for one state by hand.
Done looks like
At least 400 samples keyed with every density fraction, a 10% sample keyed twice with at least 99% of values matching, the table released under an open license, and the tool's yields matching the reports' own interpolated tables within 1 percentage point.
Open 02 · the brief
Density-graded sorter test set
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public set of photographs and depth images of coal and rock lumps, with each lump's density measured in a lab, so that sorting methods can be scored against density instead of against a person's judgment of what looks like rock.
Why it is still open
Coal-and-rock sorting studies train on data sets their authors built. A 2026 paper in the Journal of China Coal Society predicts lump density from depth-camera and dual-energy X-ray images, and its abstract page offers no public data. An open set on Zenodo from 2024 contains plain photos with no measured density. The largest open set, DsCGF (Scientific Data, 2025), holds more than 270,000 ordinary-light images labeled coal, rock or foreign object by people, with no measured density.
Built with what exists
Coal and shale lumps bought from a coal sample bank or supplier; a lab balance to weigh each lump in air and in water, which gives its density; RGB and depth cameras; Python with PyTorch.
First step
Buy 100 lumps of one coal and its roof shale, weigh each in air and in water, and photograph them.
Done looks like
2,000 lumps from at least five coals, each photographed from two sides with its density measured, released openly, with a baseline model's accuracy reported at cut densities of 1.5 and 1.8 g/cm³.