BRENNEN

Industries / Transport and vehicles / Automotive / Car washes

Maintenance

Maintenance is the work of keeping wash machines safe and running: cleaning and repairing brushes, conveyors, pumps and motors, locking machines off before anyone works on them, and settling the damage claims that follow when something goes wrong.

5

Milestones achieved, from 2005 to 2026.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 2005

    Pulled in by a hose

    On 26 April 2005 a 23-year-old attendant at a California wash was hosing down the tunnel floor with the brushes running, which gave his hose more pressure. The hose caught in a side-arm brush and pulled him in, and he died. Investigators from California's Fatality Assessment and Control Evaluation (FACE) program, funded by the US National Institute for Occupational Safety and Health (NIOSH), found that the company had no lockout/tagout program, meaning no rule to lock the power off so a machine cannot start while someone is inside, and that the 30-year-old hydraulic system ran from one wall switch.

    LessonLock the tunnel off before anyone goes in; newer machines add torque-limited brushes, which stop when they meet resistance, and pressure plates that only run the equipment when a vehicle is on them.

    cdph.ca.govcdph.ca.gov

    Credit

    California FACE program, report 05CA004 (2006)

  2. 2009

    Conveyor gap catches a foot

    The US Occupational Safety and Health Administration (OSHA) proposed $62,500 in fines against the company behind Splash Handwash in Fairfield, Connecticut, after a worker's foot and ankle were caught in an unguarded opening in the conveyor track. Inspectors also found uncovered outlets in wet areas, a locked emergency exit and unguarded belts, and repeated failures to protect and train workers who sprayed chemicals, for which OSHA had cited the company in 2008.

    LessonGuards come off and openings appear as a tunnel is worked on; OSHA's area director said such hazards appear "if the proper safeguards are not provided and maintained.".

    ohsonline.com

    Credit

    OSHA's Bridgeport area office, as reported by Occupational Health & Safety

  3. 2018

    Operators must foresee braking

    Germany's Federal Court of Justice (Bundesgerichtshof, BGH) ruled on 19 July 2018 (VII ZR 251/17) that after a rear-end collision in a wash tunnel, the operator has to prove it told customers how to behave. Following the accepted rules of technology is not enough; the wash must also guard against customer mistakes that are rare but foreseeable, such as braking on the conveyor.

    adac.de

    Credit

    BGH, as summarized by ADAC's lawyers

  4. 2024

    A machine unfit for spoilers

    The BGH ruled on 21 November 2024 (VII ZR 39/24) that a fuel station must pay about €3,200, plus €119 for a day without the car, after its wash tore the factory-fitted rear spoiler off a Land Rover. The machine was in proper order but by its design not suited to that car, and signs reading "no liability for add-on parts and rear spoilers" did not excuse the operator, who could have barred models it thought at risk. Stiftung Warentest reads the ruling to mean that damage to a car in standard trim is first presumed to be the operator's fault. In 2004 the same court had ruled that a wash cannot limit its liability to intent and gross negligence.

    LessonKeeping a machine in good repair does not cover a car it was not built for; the operator has to know which models it can wash.

    beck-aktuell.detest.de

    Credit

    BGH, presiding judge Rüdiger Pamp

  5. 2026

    Lockout failures at a chain

    On 23 September 2026 OSHA cited ModWash LLC, an express wash company with sites across the US, five of them in Sicklerville, New Jersey, for willfully exposing workers to hazardous energy by not locking out equipment before maintenance. It added repeat citations for unclear lockout procedures and untrained workers, and serious citations for missing lockout devices and for noise above 85 decibels with no hearing tests, and proposed $446,864 in penalties. The company can contest the findings.

    LessonTwenty-one years after the 2005 death, written lockout steps, locks and training were still missing at a chain's sites, by OSHA's findings.

    osha.gov

    Credit

    OSHA

Watch for

  1. Fixing washes from afar

    Mark VII, a maker of wash machines, says its My Mark VII monitoring software and Live Guard support package have resolved "as much as 60%" of problems remotely at some sites. It says its monitoring tracks signs that a brush motor is near the end of its life, so a technician can replace it at a planned visit, and that it is testing video inside the wash to spot leaks.

    Achieved whenan operator or outside party publishes remote-fix rates, motor failures caught before breakdown and downtime across a stated number of sites.

    convenience.org

    Claimed by

    Mark VII, in an article it sponsored on the site of NACS, the US convenience store association, September 2026

Open

  1. 01

    Find debris caught in brushes

    A camera check that spots foreign objects caught in a wash's brushes, such as a torn wiper blade, a piece of trim or an antenna, and holds the next car until staff clear it. Fixed cameras watch each brush as it turns, and a small vision model flags anything that is not wash cloth or foam.

    The brief
    Credit · unclaimed
  2. 02

    Wash-damage rulings, coded

    An open table of German court rulings on damage in car washes, a country where many such rulings are published. Each row gives the damage (spoiler, mirror, antenna, scratches, a collision), the kind of wash, the wording of any sign, whether the car was in standard trim, who won and the amount, with a link to the ruling. Operators would see which upkeep and which warnings hold up in court.

    The brief
    Credit · unclaimed

Open 01 · the brief

Find debris caught in brushes

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A camera check that spots foreign objects caught in a wash's brushes, such as a torn wiper blade, a piece of trim or an antenna, and holds the next car until staff clear it. Fixed cameras watch each brush as it turns, and a small vision model flags anything that is not wash cloth or foam.

Why it is still open

German courts hold the operator responsible for keeping foreign objects out of the brushes, but ADAC's lawyers note that a check after every single wash cannot be expected of an operator. ADAC's technical expert says wiper blades, antennas and trim torn off one car can catch in the brushes and scratch the next. The camera products found look at cars at the entrance, as Plate Recognizer's does, not at the brushes, and a search found no system that inspects the brushes themselves.

adac.detest.deplaterecognizer.com

Built with what exists

waterproof IP cameras with a strobe light to freeze the brush's motion; an open object detector such as Ultralytics YOLO, or a small open vision model such as Liquid AI's LFM3, fine-tuned on one graphics chip (see the Note "One GPU to fine-tune"); a spare brush hub turned slowly by a guarded bench motor for planted-object tests, so no one plants anything in a live tunnel; the labeling tool CVAT.

  1. First step

    Film one wrap-around brush at a cooperating wash for a full day from a fixed camera outside the vehicle path, and count how many frames show material other than cloth or foam.

  2. Done looks like

    2,000 labeled frames from at least three washes and the bench rig, with the model finding at least 90% of planted objects within one turn of the brush and raising fewer than one false alarm per 1,000 cars washed, published with the test set.

Open 02 · the brief

Wash-damage rulings, coded

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open table of German court rulings on damage in car washes, a country where many such rulings are published. Each row gives the damage (spoiler, mirror, antenna, scratches, a collision), the kind of wash, the wording of any sign, whether the car was in standard trim, who won and the amount, with a link to the ruling. Operators would see which upkeep and which warnings hold up in court.

Why it is still open

Stiftung Warentest and ADAC each summarize a handful of rulings, and trade and legal news reports the federal court's rulings one at a time. A search found no table or count of outcomes across rulings.

test.deadac.de

Built with what exists

Germany's federal decisions portal (rechtsprechung-im-internet.de), the state court databases and openJur; an AI model that answers fixed-choice questions about each ruling (see the Note "A thousand questions, one pass"); a second model that checks each row against the ruling for a person to confirm (see the Note "Seven more flagged"); a public GitHub repository.

  1. First step

    Collect every ruling cited on the ADAC and Stiftung Warentest pages and code the first 20 by hand to settle the columns.

  2. Done looks like

    150 rulings coded, every row linked to its source, and an error rate from two people checking a random 20% of rows.