BRENNEN

Industries / Food, farming and forestry / Agriculture and farming / Cannabis and hemp

Hemp fiber and grain

Growing hemp, cannabis bred to carry almost no THC, as a farm crop for its stalk fiber, its woody core (called hurd) and its seed, and the rules that separate it from drug cannabis.

7

Milestones achieved, from 1943 to 2024.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1943

    Wartime peak, then none

    The US Marihuana Tax Act of 1937 made hemp growers hold a federal registration and tax stamp. During the Second World War the government urged farmers to grow hemp for fiber and oil (USDA made the 1942 film "Hemp for Victory"), and US output reached more than 150 million pounds on 146,200 harvested acres in 1943, against about 1 million pounds before the war. By 1948 it was 3 million pounds on 2,800 acres, and none was recorded after the late 1950s (Congressional Research Service figures).

    LessonDemand created by a war ended with the war, and synthetic fibers, the tax law and anti-drug sentiment then kept the crop out of the US for decades.

    everycrsreport.com

    Credit

    US Department of Agriculture

  2. 1961

    Treaty spares fiber and seed

    Article 28 of the UN Single Convention on Narcotic Drugs states that the treaty "shall not apply to the cultivation of the cannabis plant exclusively for industrial purposes (fibre and seed) or horticultural purposes." That clause leaves countries free to license hemp farming while controlling cannabis grown for drugs.

    incb.org

    Credit

    United Nations

  3. 1998

    Canada licenses hemp farms

    Canada issued licenses for research crops from 1994 and commercial licenses from 1998. Planted area swung from 48,000 acres in 2006 to about 8,000 in 2008 and a record of nearly 140,000 in 2017, growth some attribute to US demand for imports, and licenses rose from 77 in 2008 to more than 1,100 in 2015 and 2016 (Congressional Research Service).

    everycrsreport.com

    Credit

    Health Canada

  4. 2018

    Hemp leaves the drug law

    The 2014 US farm bill had allowed hemp only in research pilots. The Agriculture Improvement Act, signed on 20 December 2018, defined hemp as cannabis with no more than 0.3% delta-9 THC by dry weight and took it out of the federal definition of marihuana. The same day, the US Food and Drug Administration said it had no questions about Fresh Hemp Foods' conclusion that hulled hemp seed, hemp seed protein powder and hemp seed oil are "generally recognized as safe" (GRAS) as food; FDA said they contain only trace THC and CBD.

    govinfo.govfda.goveverycrsreport.com

    Credit

    US Congress; FDA; Fresh Hemp Foods

  5. 2021

    Licenses were not crops

    After 2018, demand for CBD (cannabidiol, a non-intoxicating compound extracted from the flowers) set off a rush. Beau Whitney of Whitney Economics counted around 500,000 licensed acres in 2019 and 2020 from state figures, falling to 235,000 in 2021, and said prices of hemp biomass and processed goods fell by up to 97% by the end of 2021. USDA's first national hemp survey found 54,200 acres planted and 33,500 harvested in 2021, 12,700 of them for fiber and 8,255 for grain.

    LessonA license count shows intent, not a harvest; in 2021 the licensed area was about seven times the harvested area.

    agri-pulse.comesmis.nal.usda.gov

    Credit

    USDA National Agricultural Statistics Service; Whitney Economics

  6. 2023

    Europe raises its limit

    Under the European Union's 2023–2027 farm policy, hemp fields qualify for farm payments if the variety's THC content is below 0.3%, up from 0.2% under the 2013 rules. France grows more than 60% of the EU's hemp, followed by Germany (17%) and the Netherlands (5%), and the EU's hemp fiber area rose from 20,540 ha in 2015 to 33,020 ha in 2022, by the European Commission's figures.

    agriculture.ec.europa.eueur-lex.europa.eueur-lex.europa.eu

    Credit

    European Parliament and Council, Regulation (EU) 2021/2115

  7. 2024

    Into building codes and feed

    The 2024 International Residential Code, the US model code for houses, added Appendix BL, which allows hemp-lime walls (hempcrete: hemp hurd mixed with lime) without an engineer's design in houses up to two stories in low-seismic areas; each state or city must adopt it, and Washington's building code council was weighing a proposal to do so in 2026. On 7 August 2024 the Association of American Feed Control Officials gave final approval to hempseed meal, the cake left after pressing oil from the seed, as up to 20% of laying hens' feed, with limits of 2 parts per million total THC and 20 ppm total CBD.

    hempbuildmag.comsbcc.wa.govagnavigator.com

    Credit

    US Hemp Building Foundation and the International Code Council; the Hemp Feed Coalition and the FDA's Center for Veterinary Medicine

Watch for

  1. Spinnable fiber from Montana

    IND HEMP says a new refining line at its decortication plant in Fort Benton, Montana (decortication separates the stalk's long outer fibers from the woody core) brings its fiber to "ready-to-spin quality directly at the source," in grades that spinners can use "as supplied." The release gives no throughput or fiber-property figures and cites no outside tests.

    Achieved whenan outside spinner or textile lab publishes fiber test results, or yarn spun from the fiber is sold in commercial volume.

    textileworld.com

    Claimed by

    IND HEMP, October 2026

  2. Separate rules for fiber hemp

    A US House-passed farm bill, the Farm, Food, and National Security Act of 2026 (H.R. 7567), would split industrial hemp grown for stalk, grain or seed from hemp grown for cannabinoids and adjust testing for industrial growers. The House passed it on 30 April 2026, and the Congressional Research Service reported no Senate farm bill markup as of mid-2026. Meanwhile a law enacted in November 2025 (P.L. 119-37) moves the federal limit for all hemp from delta-9 THC to total THC, including THCA (a precursor that turns into THC when heated); a later law (P.L. 119-103, signed 2 September 2026) put most of that change off to 11 December 2026.

    Achieved whenthe bill becomes law and USDA publishes rules that test fiber and grain hemp differently from cannabinoid hemp.

    everycrsreport.comgovinfo.gov

    Claimed by

    US House of Representatives, April 2026

Open

  1. 01

    Map hemp fields from orbit

    A satellite map of hemp fields in one US state that USDA's National Hemp Report covers (Montana, for example), for one season, compared with the report's planted and harvested acres for that state.

    The brief
    Credit · unclaimed
  2. 02

    A multistate variety risk table

    One open table, by variety, of how often hemp crops tested above 0.3% total THC, pooled from every state that publishes or releases its compliance test results, with sample counts and confidence intervals, so growers can see which fiber and grain varieties risk failing the total-THC rule.

    The brief
    Credit · unclaimed

Open 01 · the brief

Map hemp fields from orbit

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A satellite map of hemp fields in one US state that USDA's National Hemp Report covers (Montana, for example), for one season, compared with the report's planted and harvested acres for that state.

Why it is still open

USDA's Cropland Data Layer, the national crop map made from satellite images, has no hemp class (its Montana legend lists hops, mint and flaxseed but not hemp), so US hemp area is known only from surveys and licenses, which differed about sevenfold in 2021. Telling cannabis apart from other crops by satellite has been shown in small areas, for example over 93% accuracy on PlanetScope images in northern Turkey (Bicakli, Kaplan and Alqasemi, Agriculture, 2022), but no published map was found that compares mapped hemp area with official acreage.

nass.usda.govapi.crossref.orgesmis.nal.usda.gov

Built with what exists

Copernicus Sentinel-2 satellite images, free and repeated every few days; Google Earth Engine; the Cropland Data Layer to rule out other crops; geotagged roadside photos to check fields.

  1. First step

    Pull this summer's Sentinel-2 images for one county with hemp grain farms and label 30 fields from roadside photos.

  2. Done looks like

    A map of one state for one season, with accuracy measured on at least 100 checked fields not used in training, and the mapped hemp area set beside the National Hemp Report's planted and harvested acres for that state.

Open 02 · the brief

A multistate variety risk table

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

One open table, by variety, of how often hemp crops tested above 0.3% total THC, pooled from every state that publishes or releases its compliance test results, with sample counts and confidence intervals, so growers can see which fiber and grain varieties risk failing the total-THC rule.

Why it is still open

Minnesota's Department of Agriculture publishes such a summary for its own samples from 2016 to 2023 (updated April 2024), but no multistate or national table was found, while federal law moves to the stricter total-THC test in November or December 2026.

mda.state.mn.useverycrsreport.com

Built with what exists

Minnesota's published table; records from other state hemp programs, requested under public-records laws; Python or R; a PDF table extractor such as Camelot or Tabula.

  1. First step

    Convert Minnesota's PDF to a CSV and send public-records requests to three other states' hemp programs.

  2. Done looks like

    Results from at least five states covering at least 30 varieties with 10 or more tested lots each, released as a CSV file with the method, plus a list of varieties whose failure rates differ between states by more than chance would explain.