BRENNEN

Industries / Mining and materials / Chemicals and petrochemicals / Biofuels

Biodiesel and renewable diesel

Turning vegetable oils and animal fats into diesel and jet fuel, either by reacting them with an alcohol (biodiesel) or with hydrogen in a refinery unit (renewable diesel and jet fuel).

7

Milestones achieved, from 1900 to 2024.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1900

    Peanut oil runs a diesel

    Rudolf Diesel invented his engine in the 1890s, and from the start it could run on several fuels, vegetable oil among them. At the Paris Exposition of 1900, one of the new diesel engines on show ran on peanut oil. Because petroleum fuel was cheap and easy to get, few people took an interest in the alternative. These facts come from the Farm Energy team of the US Cooperative Extension, citing Pahl (2005).

    LessonA fuel that works still goes unused while the fuel it would replace is cheaper.

    farm-energy.extension.org

    Credit

    Rudolf Diesel

  2. 1937

    Thinning oil with alcohol

    Raw vegetable oil is too thick for long use in a diesel engine. In 1937 G. Chavanne of the University of Brussels was granted a Belgian patent for converting vegetable oil into a fuel by transesterification. In that reaction, the oil is mixed with an alcohol so that its fatty acids split from the glycerin and form thinner esters, the product now called biodiesel. In 1938 a passenger bus running on an ethyl ester of palm oil carried passengers between Brussels and Louvain. After the oil shocks of the 1970s, engines run on straight vegetable oil were damaged by its thickness. The first plant built to make biodiesel as a fuel opened at an agricultural college in Austria in 1985, and commercial production in Europe followed from 1992. These dates come from the Farm Energy team, citing Knothe (2005) and Pahl (2005).

    LessonRaw oil damages engines, so it has to be converted before it can serve as fuel.

    biodiesel.ku.edufarm-energy.extension.org

    Credit

    G. Chavanne, University of Brussels

  3. 2005

    Clogged filters in Minnesota

    Minnesota law required diesel sold in the state to contain 2% biodiesel (B2). In December 2005 some biodiesel that did not meet the specification was confirmed to have reached Minnesota fuel terminals, while trucks reported plugged fuel filters. The state waived the requirement so that terminals could test their stock and resupply, and industry groups asked every producer to gain BQ-9000 accreditation, the industry's quality program. Filters that plugged above the cloud point, the temperature at which wax crystals first form, held sterol glucosides and saturated monoglycerides, which are minor leftovers of the oil and the reaction. In 2008 ASTM International added a cold soak filtration test to ASTM D6751, the US standard for pure biodiesel (B100). It requires 300 milliliters of B100 to pass a filter within 360 seconds, or within 200 seconds for fuel used below minus 12 °C. Biodiesel Magazine reported in 2012 that, by all accounts, vehicle filter plugging with biodiesel blends stopped afterwards, though rare cases of plugged terminal tank filters continued.

    LessonFuel can pass every listed property and still fail in the field, so the standard needed a test of how the fuel behaves as well as what it contains.

    bulktransporter.combiodieselmagazine.com

    Credit

    the National Biodiesel Board and the Minnesota Biodiesel Council, and the ASTM biodiesel task force chaired by Steve Howell

  4. 2007

    Hydrogen instead of alcohol

    Neste Oil started its first plant using its NExBTL process at the Porvoo refinery in Finland in June 2007. It was built to make 170,000 tonnes a year from rapeseed oil and tallow (Biodiesel Magazine, August 2007). The process reacts oils and fats with hydrogen over a catalyst, which is called hydrotreating. The product is a hydrocarbon like petroleum diesel rather than an ester. The US Department of Energy now calls this fuel renewable diesel. It says the fuel meets the US petroleum diesel standard, ASTM D975, and can be used alone or blended with petroleum diesel in any amount. It also says renewable diesel misses the minimum density of Europe's diesel standard, EN 590, but meets EN 15940, Europe's standard for paraffinic diesel. Neste's own release called Porvoo the first plant to make "second-generation biodiesel" with its technology.

    biodieselmagazine.comneste.comafdc.energy.gov

    Credit

    Neste Oil

  5. 2011

    Jet fuel from fats

    In July 2011 ASTM International approved hydroprocessed esters and fatty acids (HEFA) fuel as Annex A2 of ASTM D7566, its standard for jet fuel made from sources other than petroleum. HEFA fuel is made from oils and fats by hydrotreating them, then cracking and rearranging the molecules. It may make up as much as 50% of a blend with petroleum jet fuel. On its current sustainable aviation fuel (SAF) page, the US Department of Energy says all three US SAF plants use the HEFA route. The jet fuel standard ASTM D1655 also lets refineries process up to 5% biomass feedstock alongside petroleum, which is called co-processing. The department cites a count by the International Civil Aviation Organization of more than 360,000 commercial flights that have used SAF, at 46 airports.

    afdc.energy.gov

    Credit

    ASTM International

  6. 2014

    KiOR's wood biocrude fails

    KiOR raised $150 million in a public offering in June 2011 and borrowed $75 million from the state of Mississippi to make gasoline and diesel from wood chips, by way of an oil it called biocrude. Its 2011 prospectus said its demonstration unit had "achieved" about 67 gallons of fuel per bone-dry ton of wood. The $230 million plant it built at Columbus, Mississippi, made crude that was turned into just over 890,000 gallons of fuel in all, by the count of the US Securities and Exchange Commission (SEC). KiOR defaulted on the state loan and filed for bankruptcy in November 2014. In September 2016 the SEC sued the company and its former chief executive, Fred Cannon, saying the 67-gallon figure rested on undisclosed assumptions, among them a catalyst still under development, and that internal documents showed typical yields of 44 to 55 gallons. The case was settled with a $100,000 fine (Associated Press, 2017).

    LessonYields from a pilot unit are only a claim until a full-size plant delivers them.

    sec.govjacksonfreepress.comksl.com

    Credit

    a failure; the SEC's complaint, reported by the Associated Press

  7. 2024

    A refinery drops crude oil

    Phillips 66 converted its Rodeo refinery in California to make only biofuels. With the conversion complete, the US Energy Information Administration (EIA) lists Rodeo at 767 million gallons a year of capacity, up from 180 million. That makes it the second-largest renewable diesel plant in the US, after Diamond Green Diesel's 982-million-gallon plant at Norco, Louisiana, and EIA says it can switch about 150 million gallons a year to SAF. In the same October 2025 review, EIA found that US renewable diesel and related capacity grew only 391 million gallons a year in 2024, under a third of the growth in 2022 and in 2023. Monroe Energy and Chevron stopped co-processing at Trainer, Pennsylvania, and El Segundo, California. Plants run by Vertex Energy in Mobile, Alabama, and Jaxon Energy in Jackson, Mississippi, closed. EIA's explanation is that production grew past the volumes US rules required, so biofuel credit values and margins fell in 2023.

    LessonCapacity built because credit prices were high can close as quickly once supply overtakes the mandate.

    eia.gov

    Credit

    Phillips 66; figures from EIA

Watch for

  1. Rotterdam expansion slips again

    In June 2022 Neste decided to spend about €1.9 billion to add 1.3 million tonnes a year of capacity at its Rotterdam renewable fuels refinery. The expansion would raise the site to 2.7 million tonnes a year, including up to 1.2 million tonnes of SAF, and it was due to start in the first half of 2026. In its third-quarter report of 29 October 2026, Neste put the cost at about €3.0 billion, up from €2.5 billion, with start-up expected by the end of 2027. The trade publication Quantum Commodity Intelligence reported the same day that Neste's chief executive said commercial output from the new line would not begin until 2028.

    Achieved whenNeste's reports show the new line producing at close to 1.3 million tonnes a year, and an outside record, such as Dutch or EU fuel supply statistics, shows the added volume.

    biodieselmagazine.comchemxplore.comqcintel.com

    Claimed by

    Neste, October 2026

Open

  1. 01

    Which plants are running

    A free monthly record of whether each large standalone renewable diesel and HEFA plant in the US and Europe is running, idle or shut. Standalone means the site does not also refine crude oil, so its heat can be read on its own. The record would be read from free satellite images: heat from flares and furnaces shows in the short-wave infrared bands of the European Space Agency's Sentinel-2 satellites, and it can be cross-checked against the thermal band of the US Landsat satellites.

    The brief
    Credit · unclaimed
  2. 02

    Test HVO100 at the pump

    A public test of whether the renewable diesel sold neat at filling stations as HVO100 is made from plant and animal matter, as labeled. Buy samples at stations of several brands, have an accredited lab measure the share of biobased carbon in each by radiocarbon analysis, and publish the results. Radiocarbon (carbon-14) is present in carbon from living things and has decayed away in fossil carbon, so the test tells renewable from fossil fuel even when the molecules are alike.

    The brief
    Credit · unclaimed

Open 01 · the brief

Which plants are running

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A free monthly record of whether each large standalone renewable diesel and HEFA plant in the US and Europe is running, idle or shut. Standalone means the site does not also refine crude oil, so its heat can be read on its own. The record would be read from free satellite images: heat from flares and furnaces shows in the short-wave infrared bands of the European Space Agency's Sentinel-2 satellites, and it can be cross-checked against the thermal band of the US Landsat satellites.

Why it is still open

Public sources give capacity, not whether a plant is running. EIA's annual capacity review is where the 2024 closures were counted, a year after they happened. The firm SatVu sells refinery operating status from its own thermal satellite at 3.5-meter resolution, and the data are not open. A 2025 Lund University student thesis found that Sentinel-2's 2,190-nanometer band detected active makeshift oil refineries in northeast Syria and did better than the active fire product from NASA's VIIRS sensor. Searches of the web and of Crossref in November 2026 found no open tracker of this kind for biorefineries.

eia.govsatellitevu.comlup.lub.lu.se

Built with what exists

Copernicus Sentinel-2 Level-2A images (free through the Copernicus Data Space Ecosystem or Google Earth Engine); the Landsat 8 and 9 thermal band from the US Geological Survey; EIA's 2025 Renewable Diesel Fuel and Other Biofuels Plant Production Capacity Report for the plant list; Python with rasterio.

  1. First step

    Pick one standalone plant on EIA's list whose owner has publicly dated a shutdown or restart, pull every Sentinel-2 scene of it for a year either side of that date, and test whether its heat signal follows the event.

  2. Done looks like

    A status for every month from January 2022 onward for each standalone US plant above 100 million gallons a year and each large standalone European plant. The statuses are scored against at least 20 dated public events, such as start-ups, closures and planned maintenance shutdowns, and the hit rate, every miss, the code and the data are published.

Open 02 · the brief

Test HVO100 at the pump

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public test of whether the renewable diesel sold neat at filling stations as HVO100 is made from plant and animal matter, as labeled. Buy samples at stations of several brands, have an accredited lab measure the share of biobased carbon in each by radiocarbon analysis, and publish the results. Radiocarbon (carbon-14) is present in carbon from living things and has decayed away in fossil carbon, so the test tells renewable from fossil fuel even when the molecules are alike.

Why it is still open

HVO100 is now sold neat at nearly 800 German filling stations, and about 2,000 more sell diesel with HVO mixed in (AUTO BILD, October 2026). Its renewable origin is shown on paper, through certificates (see Carbon accounting). Renewable diesel is a hydrocarbon like petroleum diesel and is sold to Europe's paraffinic diesel standard, EN 15940 (US Department of Energy), so ordinary fuel tests do not show where it came from. Commercial labs can measure it: AmSpec's Rotterdam lab, for one, was accredited in 2024 to determine the biobased content of HVO and SAF by radiocarbon under the German standard DIN 51637. Searches in English and German in November 2026 found lab methods and price checks at pumps, but no published radiocarbon test of HVO100 bought at retail.

autobild.deafdc.energy.govblog.amspecgroup.com

Built with what exists

Approved fuel sample cans; a lab accredited to ISO 17025 that offers DIN 51637 or ASTM D6866 radiocarbon tests, with samples shipped as the lab directs; a sampling log of station, date, pump and receipt; a spreadsheet published with the lab reports.

  1. First step

    Get quotes from two accredited labs, then buy and send three samples from three brands as a trial.

  2. Done looks like

    30 samples from at least 15 stations and five brands in two countries, each with its lab report, its biobased share and the lab's stated uncertainty, published with a method anyone can repeat, after the brands have been given the results to comment on.