BRENNEN

Industries / Industrial equipment and services / Industrial machinery

Bearings

The bearing industry makes ball and roller bearings, rings of hardened steel with balls or rollers between them, that let shafts and wheels turn with little friction in everything from electric motors and car wheels to jet engines and wind turbines.

1883

In Schweinfurt, Germany, the metalworker and turner Friedrich Fischer first used a ball grinding mill of his own design to make hardened steel balls of equal size and roundness in large numbers, to 0.020 mm by Schaeffler's account, at a time when English makers turned balls by hand. His company moved on from balls to complete ball bearings, and more bearing makers were founded in Schweinfurt around 1900, by the same account.

hub-4.com

44

Milestones achieved across 7 domains.

9

To watch for: announced, not yet confirmed outside.

15

Open deliverables. Nobody has shipped them.

In one minute

Where it started

Grinding balls of one size in quantity, from 1883, made the ball bearing something a factory could make and sell. Between 1898 and 1907 the main types took shape: Henry Timken's tapered roller bearing, Robert Conrad's way of filling a ball bearing with unbroken grooves, and Sven Wingquist's self-aligning bearing, the first product of SKF. In 1943 about half of Germany's bearings came from around Schweinfurt, and Allied bombing of the town showed how hard an industry built on grinding machines is to stop.

Where it stands

SKF puts the world bearing market at about 500 billion Swedish kronor a year and says six makers, SKF, Schaeffler, Timken, NSK, NTN and JTEKT, hold more than half of it, with Asia-Pacific the largest and fastest-growing region. Harry Bhadeshia's 2012 review counts about six million tonnes of bearing steel made a year, most of it the same 1% carbon, 1.5% chromium steel adopted in 1905, now made far cleaner, and NASA's Erwin Zaretsky puts the potential life of a bearing at up to 80 times that of the late 1950s. A Schaeffler UK engineer, S. J. Lacey, estimates that fatigue causes less than 3% of failures in service, so much of the industry's work now goes on dirt, lubricant, fakes and watching bearings in use.

What is open

Much of what the industry knows stays in makers' files: life tests, inclusion ratings, grease results, cleanliness counts and the internal geometry behind every defect frequency. Open tables built from published reports, public tests of what buyers are told (ball grades, grease temperature limits, authentication apps, whether fakes fail sooner) and scored trials on bearings that failed in real machines are within reach of a small team. Low-cost robot arms that learn from a few demonstrations, AI models that read long documents, and cheap sensors make most of these jobs possible without a factory.

Domains

AchievedWatch forOpen

Advances to build with

1 research note

Open in bearings

3 of 15 open deliverables

Open · Steel and materials

Inclusion ratings, tested in public

An open set of microscope images of polished bearing steel sections in which every inclusion is outlined and rated by type and size by at least two metallographers working separately, with a scorecard on which any automatic rater, commercial or open, can be tested.

Built with what exists

Polished sections of bearing steel bar from several heats; a light microscope with a motorized stage; Fiji (ImageJ) for stitching; CVAT or LabelMe for outlining; segmentation models such as DeepLabv3+ or a U-Net trained on one graphics card; images published under a CC BY license.

Credit · unclaimed

Open · Making rings and balls

Grinding burn, measured openly

An open reference set of hardened 52100-type (100Cr6) bearing steel specimens ground on purpose at stepped feed rates, so that some are sound and others lightly or heavily burned, each measured by nital etching, Barkhausen noise, microhardness depth profiles and X-ray residual stress, with all raw data and photographs published and a blind test of which method catches which level of burn. Grinding burn is heat damage from grinding that changes the hardness of the surface layer, can leave internal stress and shortens fatigue life; nital etching is a chemical etch that makes burned areas visible; Barkhausen noise is a magnetic signal that changes with the steel's microstructure and stress.

Built with what exists

A surface grinder and a metallography lab at a university, run by its own staff; specimens hardened to bearing specifications; a commercial Barkhausen noise analyzer or a lab-built sensor; a microhardness tester; X-ray diffraction residual stress measurement; Python for analysis; Zenodo for the data.

Credit · unclaimed

Open · Design and assembly

Assemble a bearing by robot

A low-cost robot arm, trained from human demonstrations, that assembles a small deep-groove ball bearing from loose parts the way Conrad's 1906 patent describes: set the inner ring off center in the outer ring, drop the balls into the gap, center the rings, spread the balls evenly, and press in a snap-in plastic cage.

Built with what exists

An SO-101 arm and the LeRobot software library (the Note "No download" covers LeRobot v0.7.0); a policy fine-tuned from an open robot model such as Runway's Praxis-1 (the Note "Open robot model weights") or NVIDIA's GR00T 2, which by NVIDIA's own test averaged 95% success after five demonstrations on 50 tasks (the Note "Five demonstrations per task"); a wrist camera; a 3D-printed fixture; new bearings with snap-in plastic cages, taken apart to supply the parts.

Credit · unclaimed

Where it sits

Broader

Industrial machinery