BRENNEN

Industries / Mining and materials / Steel and metals / Aluminum smelting

Alumina refining

Alumina refining dissolves the aluminum oxide (alumina) out of bauxite ore with hot caustic soda, grows it back as crystals and bakes them into the white powder that smelters use.

6

Milestones achieved, from 1888 to 2023.

2

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1888

    Caustic soda frees alumina

    Germany issued Patent No. 43977 on 3 August 1888 for a process found by Karl Josef Bayer, an Austrian chemist then working in Russia. The Bayer process leaches bauxite under pressure with sodium hydroxide (caustic soda) to give a sodium aluminate solution, then grows aluminum hydroxide out of it by adding seed crystals. By Fathi Habashi's account it quickly displaced the furnace-based method used until then.

    link.springer.com

    Credit

    Karl Josef Bayer

  2. 1894

    First Bayer refineries open

    Gardanne in southern France was the first refinery to use the Bayer process, from 1894. The British Aluminium Company's refinery at Larne, Northern Ireland, was second: first production came on Christmas Day 1895, started up by English engineers working with Bayer himself. By the eve of the First World War Larne was the largest alumina refinery in Europe, by Thierry Renaux's history.

    hstmnetworkireland.org

    Credit

    the Gardanne refinery; British Aluminium Company

  3. 1940

    Autoclaves run in series

    Bayer dissolved bauxite in single batch pressure vessels called autoclaves, the standard until about 1940. VAW (Vereinigte Aluminium-Werke) used "tower digestion", leaching lumps of bauxite, at large scale from 1938 at its Lippewerk plant in Lünen, Germany, but abandoned it because the lumps broke down and the towers would not empty. Trains of autoclaves connected in series went into production at Lippewerk in 1940 and at the Nabwerk plant in Schwandorf in 1941. They spread after the Second World War, once piston pumps could push the abrasive slurry against the digestion pressure.

    Lessona method that works in trials can fail on how the ore itself behaves at plant scale.

    icsoba.org

    Credit

    VAW

  4. 1956

    Digestion in long tubes

    VAW brought tube digestion into industrial production in 1956. It heats the bauxite slurry in long pipes rather than tanks and reaches the 250 to 300 °C needed for bauxites rich in monohydrate minerals, which dissolve poorly at the lower temperatures autoclaves handle. Horst Peters, a former VAW engineer, calls it a "late success": by 2017 a number of refineries built in the previous 20 years used it, as easily dissolved bauxite grew scarcer.

    Lessona process can wait decades for the ore that needs it.

    icsoba.org

    Credit

    VAW

  5. 1970

    Fluid-bed calciners replace kilns

    Calcination bakes aluminum hydroxide at up to about 1,000 °C to drive off its bound water and leave alumina. Lurgi and VAW developed a stationary calciner in which the powder is carried in a stream of hot gas, called a circulating fluidized bed, and brought it to the alumina industry in 1970 in place of rotary kilns. Metso Outotec, Lurgi's successor, says it saved much fuel compared with rotary kilns and that more than 60 had been installed by 2022.

    icsoba.orgicsoba.org

    Credit

    Lurgi and VAW

  6. 2023

    Electric steam pilot shelved

    In March 2021 Alcoa began a pilot at its Wagerup refinery in Western Australia to evaporate process liquor with mechanical vapor recompression (MVR): electric compressors squeeze waste vapor until it is hot enough to reuse, in place of steam from gas-fired boilers. Two 2 MW compressors were to add 56 tonnes an hour of evaporation in a mothballed evaporator. In November 2023 Alcoa closed the project as financially unviable after repeated design changes raised its cost; money spent by then was about 21% of the approved installed cost. Alcoa's report says MVR was then used in no alumina refinery except one small plant in China.

    Lessonrefitting old equipment in a working refinery turned up costs that only detailed design revealed.

    arena.gov.au

    Credit

    Alcoa, with funding from the Australian Renewable Energy Agency (ARENA)

Watch for

  1. Hydrogen fires a calciner

    Rio Tinto and Sumitomo have built a 2.5 MW electrolyser at Rio Tinto's Yarwun refinery in Gladstone, Queensland, and fitted hydrogen burners to one of its four calciners, with 4 tonnes of hydrogen storage, enough for two hours on hydrogen alone. Rio Tinto's December 2025 report to ARENA said the plant was in commissioning, with hydrogen trials planned for the first quarter of 2026; its project page now says the plant should be operating in the second half of 2026. The first target, in 2023, was 2025.

    Achieved whenARENA or an outside party publishes measured trial results showing the calciner running on hydrogen with alumina that meets smelter-grade specifications.

    arena.gov.auriotinto.com

    Claimed by

    Rio Tinto, December 2025

  2. Heat battery for refinery steam

    ARENA agreed in October 2026 to fund a Rondo Heat Battery at Yarwun. Electric heaters store heat in refractory bricks at about 1,100 °C and release it as hot air to raise the steam used to dissolve bauxite, which at Yarwun now comes from three coal boilers and a gas-fired cogeneration plant. Rio Tinto forecasts about 67,000 tonnes a year less carbon dioxide equivalent on site. Building depends on a feasibility study, an ARENA review and Rio Tinto's investment decision.

    Achieved whenthe unit runs and its published trial data show the steam it supplied and the emissions it avoided.

    arena.gov.auarena.gov.au

    Claimed by

    Rio Tinto and ARENA, October 2026

Open

  1. 01

    Open refinery energy register

    A public table of the world's alumina refineries giving, for each, its capacity, the type of bauxite it digests, the fuel for its steam and for its calciners, and an estimate of energy and carbon dioxide per tonne of alumina with the method shown, every field linked to its source.

    The brief
    Credit · unclaimed
  2. 02

    Open Bayer circuit model

    An open-source program that balances mass and energy around a whole Bayer refinery, from digestion and flashing through clarification and precipitation to calcination, so that anyone can see where the heat goes and test changes such as heat pumps or a lower digestion temperature.

    The brief
    Credit · unclaimed

Open 01 · the brief

Open refinery energy register

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public table of the world's alumina refineries giving, for each, its capacity, the type of bauxite it digests, the fuel for its steam and for its calciners, and an estimate of energy and carbon dioxide per tonne of alumina with the method shown, every field linked to its source.

Why it is still open

The International Aluminium Institute (IAI) publishes refining energy only as regional figures built from voluntary company reports. Climate TRACE gives some refineries a modeled emissions figure, for example 2,325,266 tonnes of carbon dioxide equivalent a year for Aughinish in Ireland, but lists their fuel type as not available. The closest open registry, posted in October 2026, covers smelters, not refineries.

international-aluminium.orginzonex.co.ukessd.copernicus.org

Built with what exists

USGS Minerals Yearbook country chapters and company reports for sites and capacity; facility emissions published under the EU Emissions Trading System and Australia's Safeguard Mechanism as checks; Sentinel-2 satellite images to confirm sites; Python; an AI model to draft entries from long reports for a person to check (see the Note "Seven more flagged").

  1. First step

    List the refineries in one country chapter of the USGS Minerals Yearbook and fill in every field for five of them.

  2. Done looks like

    At least 80 refineries covering at least 90% of world alumina output by the USGS count, every field sourced, and the estimated carbon dioxide per tonne compared with officially reported figures for at least 10 refineries, with the error stated.

Open 02 · the brief

Open Bayer circuit model

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open-source program that balances mass and energy around a whole Bayer refinery, from digestion and flashing through clarification and precipitation to calcination, so that anyone can see where the heat goes and test changes such as heat pumps or a lower digestion temperature.

Why it is still open

Full refinery models are built in licensed software. A 2025 study at the National Technical University of Athens modeled a whole refinery in the commercial HSC Chemistry package and found that digestion steam alone carried 63% of the exergy input (exergy is the part of energy able to do work). The commercial SysCAD package sells an Alumina Add-On for the same job. The nearest open material found is a University of Notre Dame course notebook that sets a Bayer mass balance as a student exercise, with no solution code and no energy balance. Searches of GitHub and the web found no open-source refinery model.

icsoba.orghelp.syscad.netgithub.com

Built with what exists

Python with NumPy and SciPy; DWSIM, an open-source process simulator, for the steam and water side; published solubility data for the aluminum minerals gibbsite and boehmite; flowsheets and stream tables from published papers.

  1. First step

    Model digestion and the flash train for one gibbsite bauxite and compare the result with the Athens study's baseline.

  2. Done looks like

    The model reproduces the stream tables of three published refinery flowsheets within 5% on mass flows and 10% on steam per tonne of alumina, with code, data and tests public.