BRENNEN

Industries / Transport and vehicles / Aerospace and defense

Certification and testing

This is the work of proving to a government regulator, through analysis, ground tests and flight tests, that a design meets the safety rules, so that it can be approved and built.

5

Milestones achieved, from 1927 to 2020.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1927

    The first type certificate

    The US Air Commerce Act of 1926 made the Secretary of Commerce responsible for certifying aircraft. On 29 March 1927 the Commerce Department's Aeronautics Branch issued Aircraft Type Certificate No. 1 to the Buhl Airster CA-3, a three-seat open biplane. A type certificate approves a design, so that every aircraft built to it is covered.

    rosap.ntl.bts.govfaa.gov

    Credit

    US Department of Commerce, Aeronautics Branch

  2. 1978

    Damage tolerance becomes the rule

    In 1978 the FAA amended its airliner structure rule, 14 CFR 25.571, to add damage-tolerance requirements based on fracture mechanics, the study of how cracks grow. A damage-tolerant structure is designed on the assumption that cracks will appear, and it must keep carrying its loads until inspections find them. Airliners certified before the change were covered by a supplemental inspection program.

    faa.gov

    Credit

    Federal Aviation Administration

  3. 2003

    One regulator for Europe

    The European Union Aviation Safety Agency (EASA), which grew out of looser cooperation among national authorities called the Joint Aviation Authorities, became fully operational in 2003. By the end of 2005 it had issued over 20,000 certificates, and in 2006 the Airbus A380 received its type certificate from EASA and the FAA in a joint ceremony.

    easa.europa.eu

    Credit

    European Union; EASA

  4. 2010

    A use-by date for airframes

    A US rule published on 15 November 2010 requires the makers of existing airliners to set a limit of validity: an age, counted in flights or flight hours, up to which they must show the airplane will be free from widespread fatigue damage. Every new airliner design must set one too, and operators may not fly an airplane beyond its limit unless an extension is approved. The rule's preamble cites the Aloha Airlines accident of 1988.

    LessonFatigue tests and inspection plans hold only up to the age they were checked against.

    govinfo.gov

    Credit

    Federal Aviation Administration

  5. 2020

    Reform after two crashes

    After two crashes of the Boeing 737 MAX, the US Congress passed the Aircraft Certification, Safety, and Accountability Act in December 2020. It requires changes to the FAA's Organization Designation Authorization program, under which a manufacturer's own employees carry out certification work on the FAA's behalf, and it requires manufacturers to run safety management systems.

    LessonWhen a regulator delegates checks to the maker's staff, it needs its own way of seeing what is being approved.

    everycrsreport.com

    Credit

    US Congress, as summarised by the Congressional Research Service

Watch for

  1. An air taxi's type certificate

    Joby Aviation says it completed a "wide range" of tests that count toward FAA certification during the third quarter of 2026, as part of the fifth and final stage of type certification for its electric air taxi.

    Achieved whenthe FAA issues a type certificate for the aircraft.

    jobyaviation.com

    Claimed by

    Joby Aviation, November 2026

Open

  1. 01

    Map every airliner's rulebook

    An open table, drawn from the FAA's type certificate data sheets, that lists for each airliner model the rules it was certified to: which amendment of Part 25, the US airworthiness standards for airliners, applies to it, and every special condition, exemption and equivalent-safety finding.

    The brief
    Credit · unclaimed
  2. 02

    Free the old fatigue tables

    An open, machine-readable database of the individual fatigue test results printed in old NACA and NASA reports on aircraft metals, each value linked to its report, page and table. A fatigue test loads a metal sample over and over until it breaks and records how many cycles it lasted at each stress.

    The brief
    Credit · unclaimed

Open 01 · the brief

Map every airliner's rulebook

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open table, drawn from the FAA's type certificate data sheets, that lists for each airliner model the rules it was certified to: which amendment of Part 25, the US airworthiness standards for airliners, applies to it, and every special condition, exemption and equivalent-safety finding.

Why it is still open

A changed design may keep earlier rule amendments under the "changed product rule", 14 CFR 21.101. In September 2022 an international working group of aviation authorities, reporting to the FAA under the 2020 certification reform act, wrote that a MITRE study had found inconsistencies in the content and format of type certificate data sheets, and it recommended a common format for recording the certification basis. A search found no public, structured version.

faa.gov

Built with what exists

The data sheets published on the FAA's Dynamic Regulatory System (drs.faa.gov); the electronic Code of Federal Regulations for amendment history; an AI model that reads long PDF documents, such as Claude or Gemini, with a second checking pass; Python. The Note "Seven more flagged" covers a Claude-based reviewer of long regulated documents.

  1. First step

    Download the data sheets for ten airliner families and fill in the table by hand for two of them, to serve as the answer key.

  2. Done looks like

    Every current FAA data sheet for transport-category airplanes parsed into the table, each entry linked to its page, and 100 randomly chosen entries checked by a person against the PDFs, with the error rate published.

Open 02 · the brief

Free the old fatigue tables

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open, machine-readable database of the individual fatigue test results printed in old NACA and NASA reports on aircraft metals, each value linked to its report, page and table. A fatigue test loads a metal sample over and over until it breaks and records how many cycles it lasted at each stress.

Why it is still open

NASA's own 1976 compilation of about 4,500 fatigue, 6,500 crack-growth and 1,500 fracture data points for 2024 and 7075 aluminium, Ti-6Al-4V titanium and 300M steel was stored on 7-track magnetic tape. The source reports, such as NACA Technical Note 2389 (1951), print each specimen's result in tables, and the text layer of the scanned copy garbles them (one table title reads "RESL~TS"). A search found no open, machine-readable version.

ntrs.nasa.govntrs.nasa.gov

Built with what exists

Scanned reports from the NASA Technical Reports Server; a vision-language model that reads scanned tables, such as Claude or Gemini; Python and pandas; Zenodo to host the data.

  1. First step

    Convert the tables in NACA Technical Note 2389 for 24S-T3 aluminium and publish them with the hand check.

  2. Done looks like

    At least 20 reports converted, every value traceable to its page, and 300 randomly chosen values re-read by a person against the scans with the error rate published; curves of stress against cycles to failure redrawn from the data that match the reports' own plots.