Industries / Transport and vehicles / Aerospace and defense
Assembly and inspection
This is the work of joining parts into a finished aircraft, from drilling and fastening to wiring, and checking that every step was done.
6
Milestones achieved, from 1944 to 2024.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1944
A bomber every 63 minutes
At its Willow Run plant in Michigan, Ford Motor Company was building one B-24 Liberator bomber every 63 minutes by March 1944, and it built 8,685 during the Second World War. A car maker's mass-production methods had been applied to large aircraft.
Credit
Ford Motor Company
1995
Designed whole on a computer
In Boeing's words, the 777 was "the first airplane to be 100-percent digitally designed and preassembled on a computer". Engineers used CATIA, three-dimensional design software from Dassault Systèmes, to check that parts fitted on screen instead of building a full-size physical mock-up. Boeing received the Computerworld Smithsonian Award for the work in 1995.
Credit
Boeing; Dassault Systèmes
2005
A moving line for jetliners
Boeing put 737 final assembly at Renton, Washington, on a line that carries each aircraft from one team to the next at 2 inches (about 5 cm) per minute. By Boeing's figures, the moving line and lean methods introduced from late 1999 halved final assembly time to 11 days.
Credit
Boeing Commercial Airplanes
2019
Robots handed back to mechanics
After four years of trials, Boeing dropped the robots that drilled and fastened 777 fuselage panels, a system called FAUB built by KUKA Systems. The robots struggled to stay in step on the inside and outside of each panel, which led to overtime and unfinished work. Mechanics went back to fitting fasteners in holes drilled by an automated "flex track" system.
LessonJason Clark, the Boeing vice president overseeing 777X production, said the trial taught the company "how to design for automation", and Boeing redesigned parts of the build to use easier fasteners.
Credit
Boeing; KUKA Systems
2019
Debris sealed inside tankers
The US Air Force twice stopped accepting new Boeing KC-46 tankers in 2019 after inspectors found foreign object debris in the aircraft, including in closed compartments such as those inside the wings. The Air Force Secretary said such debris ranges from a dropped wrench to small pieces of aluminium, and an Air Force official said Boeing had not followed its own processes for keeping debris off the line.
LessonA space that will be sealed has to be proved clean before it is closed, because nobody can look inside afterwards.
Credit
US Air Force inspectors
2024
Four bolts never fitted
On 5 January 2024 a door plug, a panel that fills an unused emergency exit, blew out of Alaska Airlines flight 1282, a Boeing 737-9, six minutes after takeoff from Portland, Oregon. The NTSB found that the plug had been opened at Boeing's Renton factory in September 2023 for rivet repairs without the required paperwork, so no quality inspection of its closing took place, and the four bolts that hold it were missing. It gave the probable cause as Boeing's failure to "provide adequate training, guidance and oversight" to its factory workers, and it faulted the FAA's oversight of Boeing's known recordkeeping problems.
LessonA part that is removed on the line needs a record that follows it until it is refitted and inspected.
Credit
NTSB investigation (June 2025)
Watch for
Humanoid robots in aircraft plants
UBTech, a Chinese robot maker, said Airbus agreed to buy an undisclosed number of its Walker S2 humanoid robots and that the two will expand the use of humanoid robots in aerospace manufacturing. No factory, task or timeline was named.
Achieved whenAirbus or another party outside UBTech names a task the robots do in routine aircraft production and publishes their rate and error count.
Claimed by
UBTech, January 2026, as reported by Reuters
Open
01
A robot-built harness branch
A robot cell that lays out, routes and ties one branch of an aircraft wiring harness, the bundle of wires and connectors that carries power and signals, on a pin board from the design drawing, and then passes an electrical continuity test.
The briefCredit · unclaimed02
Debris hunt in closed bays
A camera on a probe, or a small crawler, with a vision model that searches a closed wing bay for debris before it is sealed, and a public, blind test that scores it against human inspectors.
The briefCredit · unclaimed
Open 01 · the brief
A robot-built harness branch
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A robot cell that lays out, routes and ties one branch of an aircraft wiring harness, the bundle of wires and connectors that carries power and signals, on a pin board from the design drawing, and then passes an electrical continuity test.
Why it is still open
Researchers from the Basque Research and Technology Alliance write that aerospace harness "assembly is entirely manual, and the process can take up to a month for large harnesses." Their own two-arm robot system covers only the first steps, placing the guide pins and routing cables, and they state that complete automation is not feasible.
Built with what exists
Two robot arms (that study used KUKA collaborative arms); cameras; Hugging Face LeRobot to record demonstrations; an open robot model such as NVIDIA GR00T 2 or Runway Praxis-1, which can be fine-tuned from a small number of demonstrations; a standard harness continuity tester. The Notes cover these in "Five demonstrations per task", "Open robot model weights" and "No download".
First step
Draw a 10-wire, two-branch practice harness, build it by hand five times on a pin board while filming, and list every step that needs fingers rather than a gripper.
Done looks like
20 filmed builds of the same 10-wire branch, each tested for continuity and checked against the drawing by someone outside the team, with a published count of builds finished without a person touching the wires and the time per build next to a skilled assembler's.
Open 02 · the brief
Debris hunt in closed bays
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A camera on a probe, or a small crawler, with a vision model that searches a closed wing bay for debris before it is sealed, and a public, blind test that scores it against human inspectors.
Why it is still open
The 2019 KC-46 stoppages show debris still reaching closed compartments on a modern line. The one study a search found of automated debris detection inside a wing section, a 2019 University of Washington master's thesis by Ken Latimer, reports that collars as small as 0.27 inches (7 mm) across could be detected, but it gives no detection rate, no comparison with human inspectors and no public data.
Built with what exists
A depth camera such as an Intel RealSense; an inspection borescope; open detection and segmentation models such as Grounding DINO and Meta's Segment Anything; a mock bay of aluminium sheet with a waist-size access hole.
First step
Build the mock bay and record ten seeded runs with a borescope to learn which items a camera can see at all.
Done looks like
50 blind runs, each with zero to five items placed from a fixed list (fastener collars, washers, rivet tails, wire clippings, drill shavings), with detection and false-alarm rates for each item type, for the machine and for at least three human inspectors, and the images and labels published.