Industries / Mining and materials / Chemicals and petrochemicals / Specialty chemicals / Adhesives and sealants
Removal and recycling
Removal and recycling is the work of getting glues, tapes and sealants off again: taking bonded products apart for repair, separating adhesive from paper, plastic and metal in recycling, and dealing with old sealants that turned out to be hazardous.
4
Milestones achieved, from 1979 to 2024.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1979
Toxic caulk left in walls
PCBs (polychlorinated biphenyls) are oily industrial chemicals that were made in the United States from 1929 until their manufacture and import were banned in 1979. The US Environmental Protection Agency (EPA) lists caulking, adhesives and tapes, and oil-based paint among the products that may contain them. It says caulk put in place between 1950 and 1979 may contain as much as 40% PCBs, can release them into the air and contaminate nearby masonry or wood, and recommends testing suspect caulk directly and removing it when renovation is planned, with particular care in schools and day-care buildings.
LessonAn ingredient that helped a sealant last made it a hazard decades later, so finding and removing old sealant became work of its own.
Credit
US Environmental Protection Agency
1983
Tape that stretches off
In 1982 a customer asked the adhesives department of Beiersdorf, in Hamburg, for a strong, lasting way to glue fibreglass roof panels to aluminium. Its answer, a foam adhesive film of thermoplastic rubber and resin, turned out to come cleanly off the kneader that mixed it, because the mass stretched as it was pulled and let go without residue. Beiersdorf filed a utility model (a short-term German patent) in 1983, then the patent DE 3331016, sold the film to industry as technicoll strips and later renamed it tesa Powerstrips; tesa dates the patented consumer Powerstrips to 1994. The Hamburg Chamber of Commerce says industrial demand has grown fast since 2010, for example for holding batteries in mobile phones.
Credit
Beiersdorf's adhesives department, later tesa
2011
A score for sticky paper
When paper is recycled, glue on it breaks up in the pulper into "stickies", tacky specks that slotted screens remove only if they stay large, and that otherwise re-form, foul paper machines and spoil the new paper. In August 2011 the industry's European Recovered Paper Council, today the European Paper Recycling Council (EPRC), published a scorecard that turns results from INGEDE Method 12, a laboratory test of the International Association of the Deinking Industry, into a Removal Score from -20 to +100 for any printed paper product carrying glue. The method sees particles of 100 µm (0.1 mm) and larger, and the scorecard counts stickies above 2,000 µm as fully removed by modern screens.
Credit
European Recovered Paper Council (EPRC); INGEDE
2024
Glue released by current
iPhone 16 and 16 Plus batteries are held by an adhesive that lets go when a low-voltage current passes through it; Apple's repair guide calls for a 9 V battery. In iFixit's tests, published on 22 September 2024 by its chief executive Kyle Wiens, the battery lifted out with no force after about a minute at 12 V, in about 5 seconds at 20 V and in a little over 6 minutes at 5 V; with the wires reversed the adhesive stayed on the frame instead of the battery. Apple's guide warns that release may take longer over time. iFixit says it has "high confidence" the adhesive is tesa's electrical-release technology; the article gives no confirmation from Apple or tesa. The iPhone 16 Pro models kept stretch-release strips.
Credit
Apple; tesa (probable supplier); tests by iFixit
Watch for
Battery packs unglued by heat
Henkel says it will show thermally triggered debonding-on-demand adhesives, "designed to separate bonded battery components non-destructively for repair, reuse or recycling", at the Battery Show Europe in Stuttgart on 9 to 11 June 2026. It names no customer and gives no temperatures or times.
Achieved whena battery maker, carmaker or recycler outside Henkel publishes separation times, temperatures and the condition of recovered parts for packs built with these adhesives in series production.
Claimed by
Henkel, May 2026
Open
01
Removal scores in the open
A public table of INGEDE Method 12 results and Removal Scores for adhesives on paper, such as tapes, labels, glued book spines and carton seals, giving for each the product, adhesive type, score, test date and laboratory, gathered from makers' certificates and published reports, plus a few new tests paid for by the project.
The briefCredit · unclaimed02
Which batteries need heat
A public record, for laptops, e-readers, handheld game consoles, wireless headphones and other battery-powered products sold in the EU, of how each model's battery is held in (screws, stretch-release strips, electrically released adhesive, or glue that must be heated or dissolved) and which tools, heat or solvents the maker's own repair instructions call for, set against the EU rule that takes effect on 18 February 2027. It is a study of published instructions; no battery is opened.
The briefCredit · unclaimed
Open 01 · the brief
Removal scores in the open
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public table of INGEDE Method 12 results and Removal Scores for adhesives on paper, such as tapes, labels, glued book spines and carton seals, giving for each the product, adhesive type, score, test date and laboratory, gathered from makers' certificates and published reports, plus a few new tests paid for by the project.
Why it is still open
The scorecard publishes how to score but no results. Makers name products as certified without scores: tesa's page on the method, last updated in May 2024, lists two INGEDE-certified tapes and no numbers. Searches of the web and GitHub in November 2026 found no public table of results.
Built with what exists
Makers' certificates and data sheets; the EPRC scorecard's scoring rules; a paper-testing laboratory that runs INGEDE Method 12 for the new tests; a spreadsheet or small database published under an open license.
First step
Write to INGEDE and five tape and label makers asking whether test reports may be published, and enter the first 20 certificates.
Done looks like
At least 100 adhesive products with a score and its source, at least 5 of them retested by an independent laboratory, and the retest scores published beside the makers' figures.
Open 02 · the brief
Which batteries need heat
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public record, for laptops, e-readers, handheld game consoles, wireless headphones and other battery-powered products sold in the EU, of how each model's battery is held in (screws, stretch-release strips, electrically released adhesive, or glue that must be heated or dissolved) and which tools, heat or solvents the maker's own repair instructions call for, set against the EU rule that takes effect on 18 February 2027. It is a study of published instructions; no battery is opened.
Why it is still open
From 18 February 2027 the EU Batteries Regulation requires portable batteries in products to be removable by the end user without proprietary tools, "thermal energy, or solvents". Phones and tablets follow their own ecodesign rules instead, which the European Commission's guidelines of January 2025 say prevail, and the list of other exempt products was still changing in 2026. A November 2026 search found commentary on the rule but no model-by-model record of how batteries are fixed in the products it covers.
Built with what exists
Makers' official repair manuals; iFixit's repair guides; an AI model that answers fixed-choice questions about each manual, such as Gemini Decision 1 (see the Note "A thousand questions, one pass"), with a person checking every row; a spreadsheet published under an open license.
First step
Read the battery chapters of the official repair manuals for 20 laptop models from five makers and code them by hand to settle the fields.
Done looks like
At least 150 models from at least 10 makers, each with its fixing method, the tools named, whether heat or solvent is called for, and a link to the instructions; two people code the same 30 models independently and agree on at least 95% of fields; published before 18 February 2027 and updated when the list of exempt products is final.