Industries / Mining and materials / Chemicals and petrochemicals / Specialty chemicals / Adhesives and sealants
Production
Production is the factory work of making adhesives, sealants and tapes: mixing or reacting raw materials in batches, and, for tapes and labels, spreading a thin layer of adhesive onto a moving roll of film, paper, cloth or foam and drying or curing it.
7
Milestones achieved, from 1845 to 2023.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1845
Rubber plaster by machine
William H. Shecut and Horace H. Day of New York were granted US patent 3,965 on 26 March 1845 for medical adhesive plasters made of india-rubber spread on cotton cloth. For spreading they used "the machinery commonly used for preparing India-rubber cloth"; the coated cloth then dried in the open air in summer, or in a heated room in winter, for eight to ten days, and still kept "a slightly sticky feel or tack, as it is termed" (tack is the quick grab an adhesive makes on light contact). To stop stacked sheets sticking together they dusted them with powdered soapstone, then punched four or five layers at a time with small holes so the skin could breathe.
Credit
William H. Shecut and Horace H. Day
1930
Clear tape on cellophane
3M coated cellophane, the clear film then used to wrap food, with a rubber-based adhesive and launched Scotch Cellophane Tape in 1930. The Lemelson-MIT Program, which documents inventors, calls it "the world's first transparent tape" and describes a nearly invisible adhesive "made from rubber, oils and resins" on a coated cellophane backing, waterproof and able to stand a wide range of temperature and humidity because it was designed to seal cellophane food wrap. During the Great Depression buyers used it to mend torn pages, clothes and documents.
Credit
Richard Drew, 3M
1980
Tape in place of rivets
3M's company timeline records that in 1980 it introduced VHB (Very High Bond) tapes, "replacing rivets and screws in fastening operations." The trade magazine Design World noted in 2021 that it can be used to attach decorative parts to washing machines and other appliances.
Credit
3M
1983
Solvent limits for tape lines
A solvent-based tape line coats the backing with adhesive dissolved in a solvent and drives the solvent off in an oven. On 18 October 1983 the US Environmental Protection Agency (EPA) set a performance standard for every coating line making pressure-sensitive tape and label materials (pressure-sensitive adhesives stick on light pressure, with no heat, water or solvent needed at the point of use) built or modified after 30 December 1980. A line, defined as the adhesive, release and primer coaters, the flash-off area and the ovens between the unwind and rewind rolls, may emit no more than 0.20 kg of VOCs per kg of coating solids applied, averaged over a month, or must cut its VOC emissions by 90%. Lines that use 45 tonnes (50 US tons) of VOC a year or less are exempt from the limit.
Credit
US Environmental Protection Agency
2013
A plant for 428,000 tonnes
On 18 September 2013 Henkel opened its "Dragon Plant" in the Shanghai Chemical Industry Park, 150,000 m² in area, which it called the world's largest adhesives factory, with forecast output of up to 428,000 tonnes of adhesives a year for carmakers and consumer goods makers in China and Asia. Henkel invested more than €50 million, planned about 600 jobs and moved its other adhesive production in the Shanghai area onto the one site.
Credit
Henkel
2020
Europe caps tape-line solvent losses
On 22 June 2020 the European Commission adopted conclusions on the best available techniques (BAT) for surface treatment with organic solvents, the basis for permits at large plants in the EU, with a section of its own for making adhesive tapes. For a tape plant, total VOC emissions, worked out from a solvent mass balance (an account of all solvent bought, recovered and lost), should be below 1 to 3% of the solvent it uses each year, and its waste gases should carry 2 to 20 mg of carbon per cubic meter; the US standard of 1983 lets a line comply by cutting its emissions by 90%.
Credit
European Commission
2023
A tape plant drops solvent
In September 2023 the German tape maker tesa said it had finished converting its plant at Sparta, Michigan, opened in 1982 as its first factory outside Europe, to solvent-free production, and that new "zero waste" coating equipment was expected to cut the plant's gas use by about 40% once the older machines were shut down. The US Toxics Release Inventory (TRI), where plants report releases of listed chemicals each year to the EPA, bears this out for one solvent: the Sparta plant reported toluene every year from 1990 to 2023, releasing 149,400 lb (about 68 tonnes) to the air in 1995 and 2,187 lb (about 1 tonne) in 2023, and filed no toluene report for 2024, a year for which the inventory already holds other plants' reports.
Credit
tesa
Watch for
Tape drying without gas
tesa says its Hamburg plant, its largest, needs large amounts of process heat and steam "particularly in drying processes and for the recovery of solvents." It plans to rebuild the steam boilers with dual burners that can burn hydrogen, make steam electrically and store it, and run the supply with AI-assisted control; from the end of 2027, once the city's hydrogen pipeline reaches the site, it expects to cut primary energy use by 30% and CO2 emissions by 90%, about 18,000 tonnes a year. Germany's energy agency, dena, gave the plan its Energy Efficiency Award in the "Moving Forward" category, which judges the concept, not measured results. In May 2026 tesa also said a new 4,500 m² building at its Offenburg plant, with adhesive compounding and a coating line for solvent-free production, would start producing in 2027.
Achieved whena year of metered gas, hydrogen and electricity use, with solvent emissions, for the converted Hamburg plant is published and checked by an outside party, such as an emissions register or an auditor.
Claimed by
tesa, November 2025 and May 2026
Open
01
Solvent off tape lines, tracked
A public table, plant by plant and year by year, of the solvents released by factories that coat tapes and labels, taken from public emission registers and set beside each company's statements about going solvent-free, so that claims like tesa's can be checked against what the plants themselves report.
The briefCredit · unclaimed02
Coating flaws on tape, photographed
An open set of images of coated tape and label stock with each flaw labeled by type, such as voids (bare spots), streaks, gels (lumps of undissolved polymer), bubbles, wrinkles and ragged edges, taken as rolls are unwound under a camera, and a benchmark of inspection models trained only on flawless stock.
The briefCredit · unclaimed
Open 01 · the brief
Solvent off tape lines, tracked
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public table, plant by plant and year by year, of the solvents released by factories that coat tapes and labels, taken from public emission registers and set beside each company's statements about going solvent-free, so that claims like tesa's can be checked against what the plants themselves report.
Why it is still open
The records exist one plant at a time. tesa's Sparta plant appears in the US Toxics Release Inventory with toluene reports for every year from 1990 to 2023, while tesa's own releases give group-wide percentages, such as a 50% cut in CO2 from its own operations and energy, not solvent figures per plant. EPA's 1983 standard exempts coating lines that use 45 tonnes of solvent a year or less, so small lines are the least visible, and the EU's 2020 conclusions set levels for tape plants without listing how each plant performs. Searches of the web and GitHub in November 2026 found no table that sets tape plants side by side.
Built with what exists
EPA's Envirofacts API for the Toxics Release Inventory, whose facility, report and release tables can be queried by plant and parent company; the European Environment Agency's Industrial Emissions Portal for EU plants; Python and pandas; an AI document reader to pull solvent, energy and output figures from company sustainability reports, every figure checked by hand (the Note "Seven more flagged" covers an AI reviewer of long documents).
First step
Pull the inventory's records for every plant whose parent company is a large tape or label maker, such as 3M, Avery Dennison, tesa, Nitto Denko and Intertape Polymer, and chart each plant's solvent releases by year.
Done looks like
At least 50 tape and label plants in the US and Europe, each with yearly solvent releases from the earliest year on record and a link to every record, and, for every plant a company has called solvent-free, a line saying whether the registers agree.
Open 02 · the brief
Coating flaws on tape, photographed
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An open set of images of coated tape and label stock with each flaw labeled by type, such as voids (bare spots), streaks, gels (lumps of undissolved polymer), bubbles, wrinkles and ragged edges, taken as rolls are unwound under a camera, and a benchmark of inspection models trained only on flawless stock.
Why it is still open
The public benchmarks for factory inspection leave tape out. VisA's twelve subsets are circuit boards, capsules, candles, macaroni, cashews, chewing gum and two kinds of fryum. A search of Hugging Face's dataset index for "tape" in November 2026 returned robot-task recordings and protein data, none of coating flaws; the glue-defect sets on Roboflow Universe hold 42 and 52 photos with one class each; and a "tape defect" set offered for sale on GitHub in October 2026 shows images of a conveyor belt.
Built with what exists
A hand-cranked unwind stand or small rewinder; a line-scan camera, or a phone camera over a light box; rolls of commercial tape with flaws planted by hand (pinpricks, dust, creases) and factory seconds where a maker will give them; Anomalib, Intel's open-source library of anomaly-detection models; CVAT or Label Studio for labeling.
First step
Unwind five rolls of different tapes under a phone camera and light box, mark every flaw by hand, and settle the list of flaw classes.
Done looks like
At least 5,000 images of at least 10 tape and label types, with at least 1,000 labeled flaws, published under an open license with a benchmark table giving each model's detection rate at a 1% false-alarm rate and on a tape type held out of training.