Industries / Consumer goods / Sporting goods
Protective gear
Protective gear is the helmets, masks, mouthguards and pads that athletes wear to soften or block blows, together with the standards and lab tests that decide which ones are good enough.
7
Milestones achieved, from 1878 to 2024.
2
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1878
A mask for catchers
Frederick W. Thayer of Waverly, Massachusetts, was granted a US patent on 12 February 1878 for a wire face mask for baseball catchers. Padded rests on the forehead and chin held the cage off the face, and straps kept a ball from driving it back into the face or neck.
Credit
Frederick W. Thayer
1973
A test for football helmets
In 1968 alone, 36 deaths from head and neck injuries were reported in US high school and college football. In April 1970 representatives of the NCAA, the national high school federation (NFHS), the American College Health Association and the Sporting Goods Manufacturers Association met to organize NOCSAE, the National Operating Committee on Standards for Athletic Equipment. Researchers at Wayne State University built a headform that behaves more like a human head, and NOCSAE published its football helmet standard in 1973. The NCAA required certified helmets from the 1978 season and the NFHS from 1980. NOCSAE reports that 1990 was the first season since 1931 with no head-injury deaths, and says rule changes, coaching and medical care also played a part.
Credit
NOCSAE; researchers at Wayne State University
2011
Helmets get star ratings
Standards only pass or fail a helmet. Since 2011 Virginia Tech's helmet lab has rated helmets from one to five stars, weighting each lab impact by how often players take a similar hit and measuring both straight-line and rotational acceleration of the head. It now rates helmets for football, hockey, cycling, snow sports, horse riding, soccer and other uses, and says the work takes no funding from helmet makers.
Credit
Virginia Tech Helmet Lab
2017
Cricket helmets face the ball
The 1998 British standard for cricket helmets used only a drop test, and balls could squeeze through the gap between peak and grille. The 2013 revision, BS 7928:2013, added a test that fires balls at that gap and at the grille. Helmets built to it were on sale in 2014, yet Phillip Hughes, Craig Kieswetter and Stuart Broad were all hurt that year wearing old-standard helmets, as Craig Ranson recounts in the Aspetar sports medicine journal; Hughes died. From 1 January 2017 the International Cricket Council (ICC) required any helmet worn in international cricket to meet BS 7928:2013, and a 2019 amendment added neck protectors.
LessonA better standard protects only players who wear helmets built to it, so the governing body had to require it.
Credit
ICC; England and Wales Cricket Board; British Standards Institution
2019
Top-rated helmet maker fails
VICIS of Seattle built the Zero1 football helmet. An investor quoted by GeekWire called it "rated No. 1 by the NFL", and the company raised more than $85 million from over 400 investors. In December 2019, days after laying off more than 100 staff, its board placed the company in receivership to find a buyer.
LessonTopping the lab tests did not keep a costly helmet maker solvent.
Credit
VICIS, co-founded by Sam Browd and Per Reinhall
2023
An airbag helmet pulled
Hövding 3 was a collar for cyclists that inflates an airbag around the head in a crash. On 1 November 2023 Sweden's consumer agency, Konsumentverket, temporarily banned its sale. As reported by the Danish engineering weekly Ingeniøren, the agency said it had not been shown to deploy and absorb enough energy above 20 km/h, a speed the EU type test never checked. A permanent ban and recall followed on 15 December, and Hövding filed for bankruptcy, though a court later upheld its appeal.
LessonA type test covers only the conditions it checks, so a product can be certified and still untested at common riding speeds.
Credit
Konsumentverket; Hövding
2024
Mouthguards flag hard hits
From January 2024 World Rugby required elite players to wear smart mouthguards, made by Prevent Biometrics, that measure head acceleration and send an alert to the independent match doctor when a hit passes a set level. A player with no symptoms who was missed by the TV cameras can now be taken off for a head injury assessment. RNZ reported that all Super Rugby Pacific players wore them in 2024, and that five players were removed in one Black Ferns match against France in 2023, overwhelming the medical staff. After that, World Rugby raised the alert levels from 70 g to 75 g for men and from 55 g to 65 g for women.
LessonThe alert level decides how many players leave the field, and the first levels, set with little data from women's rugby, were too low.
Credit
World Rugby; Prevent Biometrics
Watch for
A standard for youth helmets
NOCSAE finalized its first performance standard for youth football helmets, ND006, in February 2025. In August 2025 it moved the date the standard takes effect to 1 September 2027, and in February 2026 it said the certifier SEI had certified several youth models that are now on sale.
Achieved whenthe standard is in force and an outside lab, such as Virginia Tech's youth football ratings, publishes how certified models compare with older ones.
Claimed by
NOCSAE, August 2025 and February 2026
Look up any football helmet
Since 2014 NOCSAE and its licensees have put RFID tags in new and recertified football helmets, building a database of about 4.2 million helmets. In February 2026 its board approved a public website that will show each helmet's age, model, size and most recent recertification.
Achieved whenthe site is live and anyone can enter a helmet's tag and get its age and recertification record.
Claimed by
NOCSAE, February 2026
Open
01
Open rig for angled impacts
A helmet drop rig whose drawings, parts list and code are public. It drops a helmeted headform onto an angled, sandpaper-faced anvil and records both the straight-line and the rotational acceleration of the head, the two measures Virginia Tech uses to rate concussion risk. Then test helmets that Virginia Tech has already rated and compare the order.
The briefCredit · unclaimed02
Women's ball versus helmet grilles
A public table showing, for each helmet model on the ICC's list of compliant helmets, whether a women's-size cricket ball fired from a bowling machine gets through the gap between peak and grille, or pushes the grille onto the face of a test headform. Film every shot so others can check the call. Nobody stands in the line of fire; the balls hit only the headform.
The briefCredit · unclaimed
Open 01 · the brief
Open rig for angled impacts
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A helmet drop rig whose drawings, parts list and code are public. It drops a helmeted headform onto an angled, sandpaper-faced anvil and records both the straight-line and the rotational acceleration of the head, the two measures Virginia Tech uses to rate concussion risk. Then test helmets that Virginia Tech has already rated and compare the order.
Why it is still open
Low-cost rigs have been published, but none is an angled-impact rig checked against a rating lab. Alhaddad and colleagues released design files in HardwareX in 2019 for a rig built for impacts from thrown objects, and a 2023 conference paper describes a low-cost machine for bicycle-helmet impacts that measures impact time and absorbed energy. Labs that measure rotation, such as Virginia Tech's, use their own equipment. A GitHub search found sensor projects and simulations, but no open angled-impact rig.
Built with what exists
A guided drop rail made from aluminum extrusion; a standard helmet-test headform (EN 960 size); a three-axis high-g accelerometer such as Analog Devices' ADXL375 and a gyroscope rated to at least 4,000 degrees per second; a Teensy 4.1 microcontroller logging at 10 kHz or more; Python with NumPy and SciPy for filtering; FreeCAD for the drawings.
First step
Buy two bicycle helmets from opposite ends of Virginia Tech's ratings, build a guided drop onto an angled anvil, and check whether the rig puts them in the same order.
Done looks like
Drawings, parts list, code and raw data published under an open license, and at least 10 bicycle helmets that Virginia Tech has rated tested at three or more sites each, with a rank correlation of 0.8 or higher between the rig's scores and Virginia Tech's published scores.
Open 02 · the brief
Women's ball versus helmet grilles
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public table showing, for each helmet model on the ICC's list of compliant helmets, whether a women's-size cricket ball fired from a bowling machine gets through the gap between peak and grille, or pushes the grille onto the face of a test headform. Film every shot so others can check the call. Nobody stands in the line of fire; the balls hit only the headform.
Why it is still open
BS 7928 tests helmets against a men's ball and a junior ball. The ICC says there is no women's helmet and no women's standard, and it advises women to choose helmets tested against both balls because a smaller ball "could potentially get through the gap above the faceguard". Searches found no published test with the women's ball.
Built with what exists
A two-wheel cricket bowling machine; women's match balls; a standard helmet-test headform on a rigid mount; a radar speed gun or light gates; a camera filming at 240 frames per second or more; the projectile test method in BS 7928:2013+A1:2019.
First step
Buy the standard from BSI, then ask a county cricket board or a university sports-engineering lab that owns a bowling machine to host a trial on one helmet.
Done looks like
At least 20 helmet models from the ICC list tested with women's balls at the 23 m/s and 28 m/s speeds Craig Ranson gives for the junior and men's tests, five shots per model and speed, with ball speed, result and video published for every shot.