BRENNEN

Industries / Consumer goods / Sporting goods

Materials

Materials work chooses and develops the woods, metals, fibers, resins and coatings that sports equipment is made from, and deals with what becomes of them when the equipment wears out.

5

Milestones achieved, from 1950 to 2023.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1950

    A ski built like aircraft

    In 1947 Howard Head, an aircraft engineer, set out to replace long, heavy hickory skis. His design put a plywood core between two aluminum sheets, with steel sidewalls and a low-friction plastic base, borrowing how aircraft parts were built. His first six pairs all broke in testing at Stowe, Vermont, and after about 40 failed attempts over three years his skis held up on Tuckerman Ravine in 1950, according to the Aspen Times. He filed for a US patent on the composite wood and metal ski in February 1951; it was granted on 16 November 1954. By 1955 Head skis led the European and North American markets, says the National Inventors Hall of Fame.

    Lessonmoving a material from aircraft into a ski took dozens of failed designs before one survived real snow.

    invent.orgpatents.google.comaspentimes.com

    Credit

    Howard Head, Head Ski Co

  2. 1962

    Fiberglass poles bend higher

    Pole vaulters moved from bamboo and metal poles to fiberglass poles, which bend deeply and spring back to throw the vaulter upward. John Uelses became the first to clear 16 feet (4.88 m) in 1962, by TIME's account in February 1963. The magazine reported that Yang Chuan-kwang of UCLA switched from an aluminum pole to fiberglass in 1962, had to "learn to wait for that pole to snap," and raised his best from 14 ft 7 in to 16 ft 3¼ in.

    time.com

    Credit

    vaulters including John Uelses and Yang Chuan-kwang; the source does not name the pole makers

  3. 1971

    Carbon fiber goes on sale

    Akio Shindo, at Japan's Government Industrial Research Institute in Osaka, developed a way to make carbon fiber from polyacrylonitrile (PAN), a synthetic fiber, in 1959; his patent was granted in 1962. Toray licensed the process in 1970 and began commercial production in 1971. After the golfer Gay Brewer won the Taiheiyo Club Masters in October 1972 with carbon fiber shafts, Toray launched a golf shaft line in 1973 and "demand outpaced supply almost immediately," and by the end of 1974 it was expanding into tennis rackets and fishing rods, according to the World Intellectual Property Organization (WIPO).

    wipo.int

    Credit

    Akio Shindo; Toray Industries

  4. 2022

    Broken gear made new

    The World Sailing Trust set up the Carbon Fibre Circular Alliance in early 2022 with the International Tennis Federation, the International Biathlon Union, the cycling union UCI and World Sailing, and the makers Wilson, Scott Sports, Starboard and One Way. The makers sent used tennis rackets, bike frames, cross-country ski poles and paddleboard blades. Longworth recovered the carbon fibers, and Lineat Composites, a University of Bristol spin-off, lined the short fibers up into new tape. By the end of 2022 the makers had built test parts from it: ski poles, paddleboard fins, demonstrator skis, and a prototype Wilson racket with 50% recycled fiber, as CompositesWorld reported in February 2024. These were prototypes, not products on sale.

    Lessonused parts need more work than factory offcuts (fasteners removed, parts cut up, glues and coatings cleared), so Lineat's first commercial tape is made from factory scrap.

    compositesworld.com

    Credit

    World Sailing Trust; Lineat Composites; Longworth; Wilson, Scott Sports, Starboard and One Way

  5. 2023

    Fluorinated ski wax banned

    Ski waxes made with PFAS, fluorine compounds that do not break down in nature, helped skis glide, and a 2024 review found that blood and air levels of these chemicals in professional wax technicians and their wax rooms "are among the highest of any occupation investigated to date." FIS, the international ski and snowboard federation, announced a ban in 2019 but had no reliable test; in March 2023 it declared a full ban from the 2023/24 season. Its testers scan skis with infrared spectrometers (Bruker Alpha II) and took 60,000 measurements in the first season. Outside researchers then measured the effect: after the International Biathlon Union's ban, median PFAS in snowmelt at the Nové Město na Moravě venue in the Czech Republic fell by about 90% (Pařízek and colleagues, 2026), and PFAS in wax-room dust in another study fell about a hundredfold between 2020 and 2023 (Crawford and colleagues, 2026). At the February 2026 Winter Olympics three athletes were disqualified after fluorinated wax was found on their equipment.

    Lessonan earlier FIS rule from 2021/22 banned only C8 compounds such as PFOA, and makers shifted to related short-chain PFAS, by the account of Gonzalez de Vega and colleagues (2024); the full ban came only once a test could be run at the race site.

    fis-ski.comdoi.orgdoi.orgdoi.orgdoi.orgeos.org

    Credit

    FIS; International Biathlon Union

Watch for

  1. Bio-based resin in skis

    ZAG Skis says the prototype of its UBAC 95 touring ski is built with Sicomin's SR GreenPoxy 80, an epoxy resin with 80% of its content from plants, plus a topsheet with 50% bio-based content, a base with 50% to 80% recycled offcuts and sidewalls with 50% recycled plastic. Sicomin calls it one of the highest renewable contents yet in a structural epoxy and expects the resin to be available at industrial scale by 2030.

    Achieved whenthe ski is sold in a production run and an outside test or reviewer reports that it lasts as well as ZAG's skis made with ordinary epoxy.

    sicomin.com

    Claimed by

    ZAG Skis and Sicomin, February 2026

Open

  1. 01

    Hidden damage in used sticks

    A quick scan that tells whether a used carbon fiber hockey stick is close to breaking, trained and checked on used sticks that are scanned and then broken in a test rig. Release the scans, the break loads and the method.

    The brief
    Credit · unclaimed
  2. 02

    A recycler's table of gear

    An open table of what common composite sports gear is actually made of, measured by taking used products apart: fiber type, fiber share by weight, resin type, foam cores, metal parts, and how the parts are joined. Recyclers would use it to know what a bin of rackets or sticks contains before they process it.

    The brief
    Credit · unclaimed

Open 01 · the brief

Hidden damage in used sticks

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A quick scan that tells whether a used carbon fiber hockey stick is close to breaking, trained and checked on used sticks that are scanned and then broken in a test rig. Release the scans, the break loads and the method.

Why it is still open

Damage inside a composite stick can build up without showing on the surface. NASA Glenn Research Center, Cleveland State University and The Hockey Co. imaged hockey blades used in real play with X-rays, thermal imaging and shearography in 2006 and found damaged regions, but did not measure how strong the blades still were. A 2023 study by Fernberg, Bru and Joffe examined scrapped stick shafts for reuse in car crash absorbers, not for play. Searches of Zenodo, Hugging Face, Crossref and GitHub found no public set of used-stick scans paired with strength tests.

ntrs.nasa.govzenodo.org

Built with what exists

A thermal camera and a heat lamp for active thermography (heating the stick briefly and filming how the heat spreads), or a portable ultrasonic flaw detector; a three-point bend rig on a universal testing machine in a university materials lab; Python with OpenCV and PyTorch for the scan classifier.

  1. First step

    Collect 30 used sticks from a rink's broken-stick bin and a local team, and scan and break five of them to settle the test setup.

  2. Done looks like

    100 used sticks scanned and then bent to failure, with all scans and loads published under an open license, and a table showing how well the scan picks out the sticks that break below 80% of the average strength of new sticks of the same model, measured on 20 sticks held back from training.

Open 02 · the brief

A recycler's table of gear

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open table of what common composite sports gear is actually made of, measured by taking used products apart: fiber type, fiber share by weight, resin type, foam cores, metal parts, and how the parts are joined. Recyclers would use it to know what a bin of rackets or sticks contains before they process it.

Why it is still open

In the Carbon Fibre Circular Alliance trial, Lineat's team said end-of-life parts need more analysis and processing than factory scrap, to remove fasteners, cut them up and clear adhesives, which is why its first commercial tape uses factory scrap. Makers publish little about the build of their products. Searches of Zenodo, Hugging Face and Crossref found no public composition data for used sports gear.

compositesworld.com

Built with what exists

A band saw with dust extraction and a scale; resin burn-off or acid digestion to ASTM D3171, the standard method for fiber content, in a university lab; a benchtop FTIR spectrometer to identify resins; calipers and a magnet for metal parts; a shared spreadsheet and Zenodo for publishing.

  1. First step

    Ask a sports resale shop or a club for 20 broken items, then weigh, photograph and list the parts of each before cutting any.

  2. Done looks like

    100 used products of at least five kinds (for example tennis and padel rackets, hockey sticks, ski poles, paddles and skis), each with photos, measured fiber share, resin type and parts list, published under an open license, with repeat measurements on 10 items agreeing within 3 percentage points of fiber share.