Industries / Finance and business services / Printing / Signage
Fabrication
Fabrication builds the physical sign: cutting and bending metal and plastic into letters and cabinets, wiring them for light, and assembling them for mounting.
4
Milestones achieved, from 1909 to 1996.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1909
A hollow letter with lamps
Charles H. Hulse of North Yakima, Washington, filed a patent on 18 February 1909, granted on 20 July 1909, for a sign letter made of sheet metal, hollow in cross section, fixed to a letter-shaped base plate with a flange, with incandescent lamps inside and the wires hidden. Letters like this became the channel letter: a hollow letter with metal sides, called returns, and later a colored plastic face. The sign engineer Marcus Thielen explains that the sides kept the glare of bare bulbs from spilling into the next letter and blurring the word.
Credit
Charles H. Hulse
1917
A safety standard for signs
UL, the safety testing laboratory, says the first evidence of its certifying electric signs is in its 1904 "Electrical List", and that in November 1917 it published its first safety standard for electric signs, UL 48, written with the sign industry. Fifteen editions have followed, and the current one covers neon, fluorescent, LED and solar-powered signs.
Credit
Underwriters Laboratories; sign makers who helped write it
1950s
Lit plastic sign faces
In 1933 the chemist Otto Röhm made a clear, solid plastic sheet he trademarked as Plexiglas, and the Science History Institute holds a 1956 photograph of a pole-mounted Gulf service station sign made of Plexiglas by Rohm and Haas. Colored acrylic faces on channel letters gave an evenly lit surface, by Marcus Thielen's account.
Credit
Otto Röhm; Rohm and Haas
1996
Machines bend letter sides
Carl Ondracek filed a patent for an automatic channel letter bending machine on 13 August 1996, granted in 1999 and now held by Computerized Cutters Inc. of Texas. In a 2006 test, Signs of the Times found that a skilled worker took about 25 minutes to notch, flange and bend the side of a 24-inch letter by hand, while the company's Accu-Bend made it from the computer drawing in about five minutes, leaving only loading the metal coil and final assembly to people.
Credit
Carl Ondracek; Computerized Cutters Inc
Watch for
Router and stud welder combined
Graphco said it would show a cutting and routing machine joined to its automatic stud welding system, which welds the threaded pins that hold dimensional letters to a wall. It says the welder follows the router's own program, giving "precise stud placement, consistent bonding strength, and reduced rework" without separate machines and manual alignment.
Achieved whena sign shop or test lab outside Graphco publishes placement accuracy and pull-out strength for studs placed by the machine against studs placed by hand.
Claimed by
Graphco, March 2026, for the ISA International Sign Expo of April 2026
Open
01
Robot assembly of lit letters
A robot cell that finishes channel letters after the sides are bent: it places LED modules where the layout says, glues them, routes and joins the low-voltage wires, and seals the back, with a camera checking each step.
The briefCredit · unclaimed02
Outdoor test of printed letters
A one-year outdoor test of 3D printed letter sides in common printable plastics, such as PETG, ASA and polycarbonate, against aluminum controls, measuring color change, warping, impact resistance and water getting in.
The briefCredit · unclaimed
Open 01 · the brief
Robot assembly of lit letters
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A robot cell that finishes channel letters after the sides are bent: it places LED modules where the layout says, glues them, routes and joins the low-voltage wires, and seals the back, with a camera checking each step.
Why it is still open
Bending machines leave "final assembly" to people, as Signs of the Times found in 2006, and Sign Media Canada wrote in September 2025 that channel letter making is still "labour-intensive, equipment-heavy" with steps of forming, fastening and painting. Searches found no sign shop using a robot arm to assemble letters.
Built with what exists
A collaborative robot arm such as a Universal Robots UR5e or a low-cost arm for small letters, a glue dispenser, an overhead camera, the LED layout as a drawing file, and a vision-language-action model such as Gemini Robotics 2.5 (see the Note "A real production line"). Only 12 or 24 volt modules are used.
First step
Film a fabricator assembling ten letters and break the job into timed steps, to pick the first step to automate.
Done looks like
Twenty filmed letters, with a published tally of modules placed within 3 mm of the layout, a pull test of the glued modules, a light-evenness photo of each lit face, and time per letter compared with a human fabricator.
Open 02 · the brief
Outdoor test of printed letters
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A one-year outdoor test of 3D printed letter sides in common printable plastics, such as PETG, ASA and polycarbonate, against aluminum controls, measuring color change, warping, impact resistance and water getting in.
Why it is still open
Sign Media Canada reported in September 2025 that "very few shops" use 3D printing in production and that for permanent outdoor signs "most desktop-printed PETG letters still fall short compared to aluminum". The article gives no test data, and searches found no published outdoor comparison.
Built with what exists
Desktop printers such as those from Prusa or Bambu Lab, PETG, ASA and polycarbonate filament, aluminum letter stock, a spectrophotometer, calipers, a simple drop-weight impact rig and an outdoor rack.
First step
Print five 300 mm letters in each plastic, bend five aluminum controls and mount them all outdoors this month.
Done looks like
Ten letters of each material outdoors for twelve months, with monthly measurements and photos published, and a final impact and water test on every letter.