BRENNEN

Industries / Finance and business services / Printing / Signage

Digital signs

Digital signs show messages that change electronically: moving-letter bulletins, video boards, LED billboards and screens, and low-power e-paper displays at bus stops.

6

Milestones achieved, from 1928 to 2025.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1928

    News in moving lights

    In 1928 The New York Times put an electric "moving letter" sign on its building in Times Square, known as "the zipper", which ran headlines in lights and drew wide attention from New Yorkers for the next thirty years, by the historian Dale Cressman's account. Britannica puts it at about 14,800 lightbulbs.

    scholarsarchive.byu.edubritannica.com

    Credit

    The New York Times

  2. 1980

    Color video in a stadium

    Earlier large outdoor displays showed scores, text or single-color images. Mitsubishi Electric's Diamond Vision, which debuted at Dodger Stadium in Los Angeles for the All-Star Game on 8 July 1980, used red, green and blue cathode-ray tubes as pixels to show full-color moving pictures. The IEEE, the engineers' professional body, named it a Milestone in 2018 as "the world's first large-scale emissive color video display system".

    ethw.org

    Credit

    Mitsubishi Electric

  3. 2007

    Federal guidance on digital billboards

    In September 2007 the FHWA issued "Guidance on Off-Premise Changeable Message Signs", its advice on digital billboards. The memo recommended that each message stay up between 4 and 10 seconds, with 8 seconds recommended, that changes take 1 to 4 seconds, and that brightness adjust as the light changes, by a 2012 summary prepared for the California Department of Transportation.

    dot.ca.gov

    Credit

    Federal Highway Administration

  4. 2012

    Drivers glance longer

    Tania Dukic and four colleagues tracked drivers' eyes on a 40 km stretch of busy three-lane motorway through Stockholm. Drivers looked longer, more often and with longer single glances at electronic billboards than at other signs on the same road, but their driving measures showed no difference. The paper, in Traffic Injury Prevention, says whether the billboards are a safety hazard "cannot be answered conclusively based on the present data".

    LessonEye tracking showed the billboards draw attention but not whether they cause crashes, so the safety question stays open.

    scenic.orgsciencedaily.com

    Credit

    Tania Dukic, Christer Ahlstrom, Christopher Patten, Carmen Kettwich and Katja Kircher

  5. 2023

    A building wrapped in LEDs

    On 4 July 2023 the Sphere in Las Vegas lit its Exosphere, an LED skin covering 580,000 square feet of the building's outside, which its operator calls the largest LED screen on Earth. The building was designed by Populous and the screen was built with the LED maker SACO Technologies.

    inside.lighting

    Credit

    Sphere Entertainment; SACO Technologies; Populous

  6. 2025

    Solar e-paper at bus stops

    E-paper is a reflective display, like ink on paper, that needs power mainly when its image changes, so it can run from a small solar panel at stops with no power line. TriMet, the transit agency for Portland, Oregon, has installed more than 450 solar-powered e-paper signs across its system with the supplier Connectpoint, 111 of them since the start of 2024, and plans to keep adding them for five years.

    metro-magazine.com

    Credit

    TriMet; Connectpoint

Watch for

  1. E-paper preferred over LED

    Papercast says that in an eight-week trial at busy stops by an unnamed large city transport authority, with more than 1,300 passengers interviewed, people aged 16 to 54 preferred its 28-inch e-paper display to the older LED one by 22%, rated it more reliable (62% against 48%), and infrequent riders felt 26% more confident. It also cites unnamed "independent analysis" that the display uses 98.6% less energy than a typical LED display.

    Achieved whenthe transport authority publishes the trial, or an outside party measures energy use and readability side by side.

    papercast.com

    Claimed by

    Papercast, September 2025

Open

  1. 01

    Night brightness audit

    A published audit of how bright digital billboards and LED signs are at night: 100 signs in two or three cities, each measured on three nights with a luminance meter (brightness in nits) and an illuminance meter (foot-candles above the background light), and compared with the local limit, such as Philadelphia's 450 nits at night for digital billboards.

    The brief
    Credit · unclaimed
  2. 02

    Message timing checked by video

    Software that watches video of a digital sign and logs how long each message stays up, how long each change takes and whether anything moves, then flags breaks of the local rule, such as Philadelphia's rule for digital shop signs: at least eight seconds per message and no more than 0.25 seconds per change.

    The brief
    Credit · unclaimed

Open 01 · the brief

Night brightness audit

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A published audit of how bright digital billboards and LED signs are at night: 100 signs in two or three cities, each measured on three nights with a luminance meter (brightness in nits) and an illuminance meter (foot-candles above the background light), and compared with the local limit, such as Philadelphia's 450 nits at night for digital billboards.

Why it is still open

Philadelphia's building department states that it "does not have the equipment or expertise to confirm compliance with the illumination standards" and instead accepts a report from the permit holder's engineer once, at installation. Searches found no independent study of how many signs meet their limits.

phila.gov

Built with what exists

A calibrated handheld luminance meter, an illuminance meter, a tripod and rangefinder for the measuring distances set in each code, and a phone camera to record each reading.

  1. First step

    Measure ten digital signs in one city over one week and compare them with that city's code.

  2. Done looks like

    100 signs measured on three nights each, with ambient readings, photos, the limit that applies and the share of signs over it, published with the method.

Open 02 · the brief

Message timing checked by video

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

Software that watches video of a digital sign and logs how long each message stays up, how long each change takes and whether anything moves, then flags breaks of the local rule, such as Philadelphia's rule for digital shop signs: at least eight seconds per message and no more than 0.25 seconds per change.

Why it is still open

Codes set message and change times, as Philadelphia's does and as FHWA's 2007 guidance recommended, but Philadelphia checks digital signs only through the owner's report at installation, and searches found no camera-based checker of message timing.

phila.govdot.ca.gov

Built with what exists

A phone or action camera on a tripod, OpenCV and PySceneDetect to find message changes, and a multimodal model asked fixed questions about each clip, such as whether it shows motion (see the Note "A thousand questions, one pass").

  1. First step

    Film one hour of three digital signs and time 100 message changes by hand as the answer key.

  2. Done looks like

    One hour of video from each of 50 signs, with the tool's message times agreeing with hand timing within 0.2 seconds on at least 95% of messages, and per-sign results published.