Industries / Industrial equipment and services / Industrial services / Safety training
Hands-on skills
Hands-on skills are the physical routines a worker must get right under stress, such as putting on emergency breathing equipment or working in a protective suit, learned by practice while an instructor watches.
5
Milestones achieved, from 1919 to 2008.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1919
Four steps for instructors
In the First World War the Emergency Fleet Corporation of the US Shipping Board had to train shipyard workers with no experience, after a roughly ten-fold rise in the number needed. Charles R. Allen, a vocational instructor who led its instructor training, wrote in the preface to his 1919 book "The Instructor, the Man and the Job" that more than one thousand instructors had been trained under his direction. Every lesson ran in four steps: preparation, presentation, application, and testing (or inspection), in which the instructor checks the learner's work. A chapter on "safety first" says most accidents come from lack of training or from ignorance, so teaching safe habits is part of the trade instructor's job. Jim Huntzinger's history of the Training Within Industry program traces its wartime courses of the 1940s to Allen's four steps.
Credit
Charles R. Allen; Emergency Fleet Corporation
1989
Forty hours, then fieldwork
OSHA's rule for hazardous waste operations and emergency response, known as HAZWOPER (29 CFR 1910.120), published on 6 March 1989, requires general site workers at hazardous waste cleanups to get at least 40 hours of instruction off the site and at least three days of field experience under a trained, experienced supervisor, then eight hours of refresher training each year. Its Appendix E, which is not mandatory, defines hands-on training as practice in a simulated work setting and suggests no more than five students per instructor when trainees wear the most protective suits (Levels A and B). Since 1987 the Worker Training Program of the National Institute of Environmental Health Sciences (NIEHS) has funded labor-based safety organizations and universities to teach this work; by its own count they have trained more than 5 million workers.
Credit
OSHA; NIEHS Worker Training Program
1994
Pointing cuts button errors
Pointing and calling (shisa kanko in Japanese) means pointing at a signal, gauge or switch and saying its name and state aloud. Japan's labor ministry says the habit began with steam locomotive drivers of Japanese National Railways checking signals. In a 1994 experiment by the Railway Technical Research Institute, people pressed the wrong button 2.38% of the time when they neither pointed nor called, 1.0% when they only called, 0.75% when they only pointed and 0.38% when they did both, about one-sixth of the first rate. The Japan Industrial Safety and Health Association (JISHA) builds pointing and calling into hazard prediction training (KYT), short drills in which a crew, or one worker, finds and talks through the hazards of a job before starting it.
Credit
Japanese National Railways; Railway Technical Research Institute; JISHA
2006
Self-rescuers practiced each quarter
A self-contained self-rescuer (SCSR) is a small breathing unit that makes or supplies oxygen so a miner can walk out through smoke or bad air. After the Sago and Aracoma Alma mine disasters of January 2006, the Mine Safety and Health Administration (MSHA) issued an emergency rule on 9 March 2006 and a final rule on 8 December 2006. Underground coal miners must show they can put on the units and switch between them before going underground, practice both by hand in every quarterly evacuation drill, and get yearly "expectations training", breathing through a realistic training unit so that the heat and breathing resistance of a real one come as no surprise. MSHA cited studies from 1990 to 1993 by the US Bureau of Mines, the University of Kentucky and MSHA; in one, the rate of correct donning dropped by about 80% in checks about 90 days after training. NIOSH researchers K. M. Kowalski-Trakofler, C. Vaught and M. J. Brnich listed nine things miners should be told to expect from a unit, among them its heat, its taste, coughing and hard breathing.
Lessona skill used only in emergencies fades within months unless it is practiced.
Credit
MSHA; NIOSH
2008
Rescue teams train in smoke
MSHA's rule of 8 February 2008 for mine rescue teams, written under the MINER Act of 2006, raised each team member's annual training from 40 to 96 hours, given at least 8 hours every two months, including training at each mine the team covers. Members must take part in two local mine rescue contests a year, which MSHA says have historically kept teams trained, and at least once a year must wear their breathing apparatus in smoke, in harmless theatrical smoke, or in an equivalent setting such as glasses that cut vision.
Credit
MSHA
Watch for
Glasses that coach the wearer
Viture says its Helix safety glasses, shown at the Augmented World Expo in June 2026 and built on NVIDIA's XR AI software, stream what the wearer sees and hears to a multimodal AI model, one that reads images and sound as well as text, for "AI-assisted coaching, compliance" and live safety warnings; the report gives checking that a machine is locked before maintenance as an example. Safety certification was still in progress, the battery runs for a little over 60 minutes, and the glasses were expected in early 2027 at the soonest.
Achieved whenthe glasses ship with a safety eyewear certification and an outside test reports how often their warnings catch planted errors in a set of hands-on tasks.
Claimed by
Viture, June 2026
Open
01
Score self-rescuer donning on video
A program that watches phone video of a miner putting on a self-rescuer training unit, marks each step of the maker's donning procedure as done, done out of order or missed, and times the moment the miner starts breathing from the unit, together with a released set of labeled videos.
The briefCredit · unclaimed02
Measure how fast skills fade
A public study that teaches volunteers three hands-on safety routines that carry no hazard in practice: putting on a self-rescuer training unit, fitting a full-body fall harness while standing on the floor, and placing locks and tags on a training board with no power. It retests them on video at 30, 90 and 180 days, with half given a short refresher at 30 days.
The briefCredit · unclaimed
Open 01 · the brief
Score self-rescuer donning on video
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A program that watches phone video of a miner putting on a self-rescuer training unit, marks each step of the maker's donning procedure as done, done out of order or missed, and times the moment the miner starts breathing from the unit, together with a released set of labeled videos.
Why it is still open
MSHA requires every underground coal miner to show proficiency each quarter, and a person judges it. A 2025 scoping review found only five studies of AI-assisted training in putting on and taking off protective equipment, all in health care and all from China and Australia, and an open 2026 project, BuddyAI, checks each step of putting on Ebola protective gear with Google's Gemma 4 model. A Europe PMC search for self-contained self-rescuer training returned eight papers, none on automatic scoring.
Built with what exists
The realistic training units mines already buy for expectations training; phone cameras; Google's open MediaPipe hand and body tracking; an open vision-language model such as Gemma 4 for the step checks; CVAT, an open labeling tool.
First step
Film 20 donnings in a mine training class or a university mining program, each with the instructor's score sheet.
Done looks like
At least 200 filmed donnings by at least 40 people; the program agrees with two certified instructors on at least 90% of step calls, and its time to first breath is within 2 seconds of theirs; videos released with the wearers' consent.
Open 02 · the brief
Measure how fast skills fade
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public study that teaches volunteers three hands-on safety routines that carry no hazard in practice: putting on a self-rescuer training unit, fitting a full-body fall harness while standing on the floor, and placing locks and tags on a training board with no power. It retests them on video at 30, 90 and 180 days, with half given a short refresher at 30 days.
Why it is still open
Refresher intervals are set by rule without public decay curves for these routines. HAZWOPER asks for eight hours a year, and MSHA for quarterly practice, citing its 1990s skill studies only in summary. Studies that measured fading looked at one routine each and released no data: Michael Brnich, H. J. Kellner Jr. and C. Vaught of the Bureau of Mines taught 155 people to put on a self-rescuer by one of three methods and found a significant loss of skill within 3 months (1988); Philip Harber, Jing Su and Cheng Cheng Hu found respirator donning and fit significantly worse 6 months after training in 175 people (2014). A 2026 meta-regression of 83 studies by Ruggiero Lovreglio and colleagues measured how safety knowledge declines over time, mostly with closed-ended questions rather than hands-on performance.
law.cornell.edufederalregister.govstacks.cdc.govexperts.arizona.eduapi.openalex.org
Built with what exists
Training units and harnesses from safety suppliers; lockout training boards; phone video; the scorer from the item above, or two instructors who do not know which group each person is in; OSF, the Open Science Framework, to register the plan before data collection.
First step
Write the scoring checklist for each routine and register the study plan on OSF.
Done looks like
120 participants retested at all three points; published curves of the share doing each routine correctly over time, with and without the refresher; data and score sheets released.