Industries / Consumer goods / Musical instruments
Guitars and strings
Making guitars, violins and other instruments with strings, and the bows and woods they depend on.
7
Milestones achieved, from 1862 to 2025.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1862
Testing the guitar's top
The Spanish maker Antonio de Torres worked in two periods, from 1852 to the early 1870s and again from 1875, by Classical Guitar magazine's account. In 1862 he built a guitar (known as FE 14) with a spruce top and with back and sides of papier-mâché, reinforced with cedar and pine. The magazine says it was "an experiment to test his theory that the soundboard is the most critical aspect of the guitar's sound", and that the woods of the back and sides mattered less. The Museu de la Música in Barcelona owns it.
LessonA maker can test a belief about materials by building an instrument that breaks it.
Credit
Antonio de Torres
1937
A pickup for strings
On 10 August 1937 the US Patent Office granted George D. Beauchamp of Los Angeles patent 2,089,171 for an "electrical stringed musical instrument", filed on 2 June 1934 and assigned to the Electro String Instrument Corporation. It covers a stringed instrument whose vibrations are picked up electrically, so an amplifier can make them loud.
Credit
George D. Beauchamp; Electro String Instrument Corporation
1950
A solid body, bolted neck
In 1950 Leo Fender's company launched its first solid-body electric guitar, called at first the Esquire, then the Broadcaster, and finally the Telecaster, writes the guitar historian Tony Bacon. Mixdown magazine says Fender changed the name to Telecaster in 1951 because Gretsch already used the Broadcaster name, and that the neck "was also bolted on, rather than glued". Mixdown calls it the world's first mass-produced solid-body guitar; see Checks.
Credit
Leo Fender and the Fender company
2012
Gibson pays over ebony
On 6 August 2012 Gibson Guitar agreed to pay a US$300,000 fine under the Lacey Act, a US law against trade in illegally logged wood, plus US$50,000 to the National Fish and Wildlife Foundation. It also gave up Madagascar ebony worth US$261,844. Madagascar had banned harvesting ebony, and exporting it unfinished, in 2006. Gibson received four shipments of ebony fingerboard blanks between October 2008 and September 2009, and a June 2008 trip report that raised doubts was "not further investigated or acted upon". Gibson accepted responsibility and avoided criminal prosecution.
LessonA maker is answerable for how its wood was cut, not only for what it paid for it.
Credit
the US Department of Justice; Gibson Guitar Corp
2012
Players fail the Stradivari test
In September 2010, at the International Violin Competition of Indianapolis, Claudia Fritz, Joseph Curtin and colleagues asked 21 experienced violinists to play six violins in a hotel room, double-blind: neither the players nor the people handing over the violins knew which was which. Three were old (Stradivari violins from about 1700 and about 1715, and a Guarneri del Gesù from about 1740) and three were new. A new violin was the most preferred, the Stradivari of about 1700 was the least preferred, and "most players seemed unable to tell whether their most-preferred instrument was new or old" (PNAS, 2012). In a 2017 follow-up, 137 listeners in a Paris auditorium and a New York concert hall preferred the new violins on average and judged them to project better.
LessonPrices and reputations can rest on differences that players and listeners do not reliably hear.
Credit
Claudia Fritz and Joseph Curtin, with Jacques Poitevineau, Palmer Morrel-Samuels and Fan-Chia Tao
2018
Back woods barely matter
Roger Bucknall of Fylde Guitars built six steel-string guitars that differed only in the wood of their backs and sides: Brazilian rosewood, Indian rosewood, mahogany, maple, sapele and walnut. 52 guitarists rated them in a dim room while wearing welder's goggles, so they could not see the wood, and 31 guitarists took a blind test of telling them apart. The Lancaster University team found that the wood "has only a marginal impact" on the guitars' vibration and perceived sound (Journal of the Acoustical Society of America, 2018). Brazilian rosewood is the one rosewood still on CITES Appendix I, the treaty list that bans most commercial trade.
LessonCommon, legal woods can stand in for endangered ones on the back of a guitar, as Torres argued in 1862.
Credit
Samuele Carcagno, Roger Bucknall, Jim Woodhouse, Claudia Fritz and Christopher Plack
2025
Bows stay tradeable, with rules
CITES, the treaty that controls trade in endangered species, held its 20th conference in Samarkand, Uzbekistan, ending on 5 December 2025. Brazil had sought to move pernambuco (Paubrasilia echinata), the wood of fine bows for string instruments, to Appendix I, which would have meant "a full restriction on sale and travelling cross-border with bows", in the words of PEARLE, a European performing arts federation. The parties kept it on Appendix II with a revised Annotation #10, which took effect on 5 March 2026 by NAMM's account. Musicians may take their own bows abroad without permits to perform, teach or have them repaired; commercial trade in wild-harvested wood has a zero quota; and wood harvested before 13 September 2007 may be sold with a pre-convention certificate.
Credit
the parties to CITES; music organizations including PEARLE, NAMM and the League of American Orchestras
Watch for
Measuring bow wood yields
Sixteen bow-making and music organizations told the CITES Plants Committee that the trade is preparing a self-funded international study of how bow makers grade, accept and reject pernambuco blanks. CITES wants a "conversion factor", the number of bows a given volume of wood yields, and the committee's own document notes that "no standardized species-specific conversion factors are currently available". The study is meant to supply data on grading, rejection rates, density and yield at each stage of production.
Achieved whenthe survey results and method are published and the Plants Committee adopts a conversion factor that uses them, or an outside body repeats the measurements.
Claimed by
an information document from 16 organizations including the League of American Orchestras, PEARLE and the International Alliance of Violin and Bow Makers for Endangered Species, July 2026
Open
01
A register of bow marks
A free, open register in which bow makers record each new pernambuco bow: the number branded on the stick, the maker's initials and the date, photos of the brand and of the whole bow, and the plank the wood came from. Add a phone tool that reads the brand from a close-up photo and finds the record, so a customs officer, a shop or a musician can check a bow in a minute.
The briefCredit · unclaimed02
A phone check of setup
A phone app that measures a guitar's setup from photos and sound: the height of the strings at the 12th fret, the neck relief (the slight forward bow of the neck), the height at the nut, and intonation (whether the note at the 12th fret is exactly an octave above the open string). It compares the readings with the maker's targets and says what to adjust.
The briefCredit · unclaimed
Open 01 · the brief
A register of bow marks
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A free, open register in which bow makers record each new pernambuco bow: the number branded on the stick, the maker's initials and the date, photos of the brand and of the whole bow, and the plank the wood came from. Add a phone tool that reads the brand from a close-up photo and finds the record, so a customs officer, a shop or a musician can check a bow in a minute.
Why it is still open
Bow makers have drafted a "Traceability System for New Pernambuco Bows": each plank gets a number that follows the wood to the finished bow, where it is branded with the maker's initials and the date. It is voluntary, and no shared database is described. CITES has left "marking and traceability standards" and stockpile management to work between conferences, until its next one, expected in late 2028.
Built with what exists
Phone cameras with a clip-on macro lens; a small open-weight vision model fine-tuned on photos of bow brands (see the Note "One GPU to fine-tune"); an open database such as PostgreSQL; record fields taken from the bow makers' draft and from the CITES pre-convention certificate.
First step
Ask one bow makers' association for its draft traceability document, then photograph the brands on 20 bows to see whether a phone can read them.
Done looks like
At least three bow makers enter 300 bows. A second person photographs 50 of them in different light, and the tool finds the right record for at least 48. The record format and code are published under an open license.
Open 02 · the brief
A phone check of setup
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A phone app that measures a guitar's setup from photos and sound: the height of the strings at the 12th fret, the neck relief (the slight forward bow of the neck), the height at the nut, and intonation (whether the note at the 12th fret is exactly an octave above the open string). It compares the readings with the maker's targets and says what to adjust.
Why it is still open
Relief is still measured with a capo and a feeler gauge, or with a dial gauge that reads in thousandths of an inch, as StewMac's guide explains; StewMac gives targets of 0.10–0.20 mm for electric guitars and 0.15–0.30 mm for acoustic guitars. A search for this report found setup apps that log numbers typed in by hand, and digital gauges, but no app that takes these readings from the camera.
Built with what exists
A phone camera and a printed scale card of known size laid along the frets; OpenCV for finding the edges of strings and frets; an open pitch tracker such as aubio for intonation; a set of feeler gauges and a strobe tuner to check the results.
First step
Photograph the 12th fret of 10 guitars beside a printed scale card and compare the measurements in pixels with feeler-gauge readings.
Done looks like
On 50 guitars, camera readings of relief and 12th-fret string height within 0.1 mm of feeler-gauge readings for at least 45, and intonation readings within 2 cents of a strobe tuner (a cent is a hundredth of a semitone).