Industries / Consumer goods / Musical instruments
Drums and percussion
Making drums, cymbals and other instruments that are struck, from the drum kit and its heads to electronic drums and the steelpan.
5
Milestones achieved, from 1909 to 2024.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1909
A bass drum pedal
On 25 May 1909 William F. Ludwig of Chicago was granted US patent 922,706 for a "drum and cymbal playing apparatus", filed on 8 February 1909. It is a foot pedal that drives one beater against the bass drum and another against a cymbal.
Credit
William F. Ludwig
1957
Plastic replaces calfskin
Drumheads were made of calfskin until polyester film came in. DuPont sold the film as Mylar. Remo's own history credits Jim Erwin of 3M with first using Mylar as a drumhead around 1952 or 1953, and Chick Evans with a Mylar head completed in late 1956. Remo, Inc. was founded on 1 June 1957 and showed its Weather King head that year. Its patent, filed on 15 August 1957 and granted to Remo D. Belli and Samuel N. Muchnick on 3 May 1960, bonds the edge of the plastic sheet into a channel ring with a synthetic resin. Remo says it "has never claimed to have made the first synthetic head", only "the first successful plastic drum head".
Credit
Remo Belli and Sam Muchnick (Remo, Inc.); Chick Evans; Jim Erwin
1981
Drums made of circuits
In 1981 Dave Simmons's company released the SDS5, also called the SDSV, an electronic drum kit: the drummer hits pads that trigger sounds made by electronic circuits. The company's history says it grew from 5 people to 60 in three years and peaked at more than 100, and that its 1987 SDX "took every penny the company had to develop". Guitar Center relaunched the Simmons name in 2006.
Credit
Dave Simmons
1997
Mesh heads for electronic drums
In 1997 Roland launched the TD-10 V-Drums, which it calls "the very first V-Drums kit", with "the world's first mesh pads for snare and toms": pads with tensioned heads of woven mesh in place of rubber. In 1998 it added the KD-120, which it calls "the first kick pad featuring a mesh head". These "firsts" are Roland's own.
Credit
Roland
2024
Steelpan tied to its home
On 24 July 2023 the UN General Assembly proclaimed 11 August as World Steelpan Day, recognizing the steelpan, "which originated in Trinidad and Tobago" (resolution 77/316). On 9 August 2024 the Trinidad and Tobago Intellectual Property Office granted Pan Trinbago Geographical Indication rights: a legal mark tying a product to the place it comes from and the way it is made there. Pans carrying the mark must "meet specific standards" and be "made using specific methods".
Credit
the Government of Trinidad and Tobago; Pan Trinbago; the UN General Assembly
Watch for
Steelpan production standards
The Intellectual Property Office says Pan Trinbago is now responsible for "overseeing use of the GI mark, verifying compliance with production standards", and "has established a GI Committee to support these responsibilities". It gives no timeline.
Achieved whenPan Trinbago publishes the production standard and a list of makers whose pans have been checked against it.
Claimed by
the Trinidad and Tobago Intellectual Property Office, July 2025
Open
01
A standard latency test
An open test rig and method that strikes each pad of an electronic drum kit the same way hundreds of times and measures latency (the delay from the stick hitting the pad to the sound coming out), its spread from hit to hit, how evenly soft and hard hits are graded, and false triggers on neighboring pads. Publish the results for current kits.
The briefCredit · unclaimed02
A tuning aid for steelpan
A tablet or phone tool that shows a pan tuner, as they hammer, the pitch of a note and of its main overtones and how far each is from its target, and keeps a record of each note so a master tuner can check an apprentice's work.
The briefCredit · unclaimed
Open 01 · the brief
A standard latency test
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An open test rig and method that strikes each pad of an electronic drum kit the same way hundreds of times and measures latency (the delay from the stick hitting the pad to the sound coming out), its spread from hit to hit, how evenly soft and hard hits are graded, and false triggers on neighboring pads. Publish the results for current kits.
Why it is still open
The review site DrumSpy measured about 8 ms of pad latency on the Alesis Strata Prime using "sample-accurate timing (mic on the pad)", against averages of 9.2 and 9.5 ms across six kits, but it names no equipment and no way of striking the same hit twice. No shared method that makers or reviewers use was found.
Built with what exists
A solenoid striker, or a low-cost robot arm such as the SO-101 run with Hugging Face's LeRobot software (see the Note "No download"); a contact microphone on the pad and a cable from the module's output into a two-channel audio interface; Python for the timing analysis.
First step
Build a solenoid striker and measure one pad 500 times to find the rig's own timing spread.
Done looks like
15 kits from at least 4 brands, 500 strikes per pad at 3 strengths, latency and spread reported in milliseconds, and the method and raw recordings published so that a second lab can repeat a kit's result within 0.5 ms.
Open 02 · the brief
A tuning aid for steelpan
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A tablet or phone tool that shows a pan tuner, as they hammer, the pitch of a note and of its main overtones and how far each is from its target, and keeps a record of each note so a master tuner can check an apprentice's work.
Why it is still open
In Trinidad and Tobago "the demand for experienced tuners exceeds the supply", and newly certified tuners still need "significant field experience after certification", the columnist Martin Daly wrote in 2024. The government's apprenticeship programme, launched in March 2025, trains a first group of 15 people aged 17 to 35 over two years. Piano tuners have software that measures the overtones of each note, such as TuneLab; a search for this report found none built for the steelpan.
Built with what exists
A measurement microphone; open audio libraries such as aubio and librosa to track pitch and overtones; a tablet; recordings of notes tuned by master tuners as the reference.
First step
Record every note of one well-tuned tenor pan and chart each note's overtones to fix the targets.
Done looks like
On 3 pans, the tool's pitch readings within 2 cents of a strobe tuner for every note; 5 tuners using it in their work; and apprentices' time to bring a note to a master's standard compared with and without the tool.