BRENNEN

Industries / Industrial equipment and services / Industrial services / MRO supply

Vending and kits

This work brings parts and supplies to the worker instead of sending the worker to a counter: vending machines and managed bins on the shop floor, stores inside the plant run by a distributor, and kits of parts gathered for a job before it starts.

4

Milestones achieved, from 1993 to 2006.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1993

    Tool cribs become vending machines

    A tool crib is a counter where an attendant hands out tools and supplies. Kent V. Savage of Electronic Merchandising Systems in Cincinnati was granted US patent 5,205,436 on 27 April 1993 for a system of tool dispensers run by a host computer that records what each worker takes. The Christian Science Monitor reported in November 1994 that his machines, which also warn a manager and a supplier when stock runs low, had been in use for about a year at companies including Westinghouse, Pratt & Whitney, Bristol-Myers Squibb and Chrysler. At Zimmer, a Bristol-Myers Squibb company that made artificial hips and knees, three dispensers let the plant drop two night-shift crib attendants.

    patents.google.comcsmonitor.com

    Credit

    Kent V. Savage, Electronic Merchandising Systems

  2. 1998

    Distributors run the storeroom

    In an In-Plant Store, a distributor takes over a plant's storeroom for maintenance, repair and operating (MRO) supplies: its own staff buy, receive, stock and issue them, and the plant buys nearly all such supplies through the store and usually pays only after they are used. Strategic Distribution bought Industrial Systems Associates, which ran the program, on 4 January 1994, and at the end of 1998 ran 134 such stores for 57 customers, up from 101 a year earlier. It said a plant had typically bought these supplies from as many as 500 distributors before.

    sec.gov

    Credit

    Industrial Systems Associates and Strategic Distribution

  3. 2003

    Plants take stores back

    Strategic Distribution's business shrank as large customers left. Its contract with Kraft ended in 2002, and in July 2003 it handed all storerooms back to El Paso Corporation, then its largest customer, after the two agreed to end their contracts. Revenue fell from $319.6 million in 2001 to $136.9 million in 2005, with an operating loss in every one of those years, and in 2005 two customers, Molson Coors and the New York City Department of Education, made up 33% of revenue.

    LessonA store inside a customer's plant ties the supplier to a few contracts that can end.

    sec.gov

    Credit

    reported in Strategic Distribution's own annual filing for 2005

  4. 2006

    The supplier keeps the shelves

    W.W. Grainger launched KeepStock in 2006, a program of on-site services and vendor-managed inventory, in which the supplier watches stock levels and refills the customer's shelves and bins. In its annual report for 2011, Grainger said the program had grown to more than 14,000 customers and 30,000 installations.

    sec.gov

    Credit

    W.W. Grainger

Watch for

  1. Robots to pick maintenance kits

    Tier 1 MRO, which sells inventory control services for maintenance stores, and IntegrUP, an automation integrator founded by Antonio Pagano, former chief executive of the storage maker Modula, said they would use collaborative robots to pick and kit MRO components for maintenance technicians, with first pilots at Tier 1 MRO's customers in manufacturing, aerospace, car assembly and retail "in the coming months".

    Achieved whena customer site reports kits picked by the robots over months of routine work, with the number of kits, wrong or missing items and time per kit, checked by someone other than the two companies.

    briefglance.com

    Claimed by

    Tier 1 MRO and IntegrUP, April 2026

Open

  1. 01

    Robot picks a repair kit

    A robot arm that reads the parts list of a maintenance work order, picks each item from a rack of storeroom bins, including bagged gaskets and O-rings, boxed bearings, loose bolts and filters, checks each label against the list with a camera, and places the kit in a tote, flagging anything it cannot find.

    The brief
    Credit · unclaimed
  2. 02

    Test the vending savings claims

    An independent before-and-after study of what industrial vending machines do to the use of gloves, safety glasses, cutting tools and other supplies, from item-level issue records of public bodies that installed them, compared with similar sites that did not.

    The brief
    Credit · unclaimed

Open 01 · the brief

Robot picks a repair kit

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A robot arm that reads the parts list of a maintenance work order, picks each item from a rack of storeroom bins, including bagged gaskets and O-rings, boxed bearings, loose bolts and filters, checks each label against the list with a camera, and places the kit in a tote, flagging anything it cannot find.

Why it is still open

Tier 1 MRO and IntegrUP announced robot kitting of MRO parts in April 2026 but had not reported a pilot. NIST's Agile Robotics for Industrial Automation Competition (ARIAC) scores kitting robots in simulation, and the robot kitting reported from factories handles parts for the production line, not mixed maintenance stock.

briefglance.compages.nist.gov

Built with what exists

A low-cost arm such as the SO-101 run with Hugging Face's LeRobot software (see the Note "No download"), or a collaborative arm such as a Universal Robots UR5e; an open robot model that learns a task from a few demonstrations, such as NVIDIA's GR00T 2 (see the Note "Five demonstrations per task") or Runway's Praxis-1 (see the Note "Open robot model weights"); a wrist camera with barcode reading through the open ZXing library. Google DeepMind's kitting pilot with Mercedes-Benz is the nearest comparison (see the Note "A real production line").

  1. First step

    Stock a shelf with 40 bins of common maintenance items, write 10 work-order parts lists, and record demonstrations of picking each kind of item through the arm's remote control.

  2. Done looks like

    50 filmed kits of 5 to 10 items each, drawn from 40 stock items, with a published tally of complete and correct kits, wrong or missing items by item type, and minutes per kit against a person picking the same lists.

Open 02 · the brief

Test the vending savings claims

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An independent before-and-after study of what industrial vending machines do to the use of gloves, safety glasses, cutting tools and other supplies, from item-level issue records of public bodies that installed them, compared with similar sites that did not.

Why it is still open

The figures in circulation come from sellers. RS says its own research shows that vending typically cuts consumption by 25% to 40%, Würth Industry USA says up to 35%, and Hoffmann Group cites results from its customers; no independent measurement was found.

uk.rs-online.comwurthindustry.com

Built with what exists

Public records requests to agencies that bought vending machines, such as state transportation department shops, transit agencies and public universities; Python and pandas; a difference-in-differences comparison, which sets the change at sites with machines against the change at similar sites without them over the same months.

  1. First step

    Search public procurement portals for industrial vending contracts and send records requests to the first five agencies found.

  2. Done looks like

    Item-level issue data from at least 10 sites with machines and 5 without, covering 12 months before and 12 months after installation, with the analysis code and anonymized data published and the result given by item category.