BRENNEN

Industries / Industrial equipment and services / Industrial machinery / Industrial filtration

Dust collection

Dust collection is taking solid particles out of a plant's air or exhaust gas, with cloth bags, spinning separators called cyclones, or electric fields, before the dust is breathed in or released.

6

Milestones achieved, from 1852 to 2014.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1852

    Cloth bags catch zinc fume

    Zinc white, a paint pigment, was made by burning zinc ore and catching the white oxide smoke. A US patent granted to S. T. Jones on or about 24 February 1852 caught it in "a porous bag of muslin or other textile fabric". Samuel Wetherill of Bethlehem, Pennsylvania, cited that patent in his own of 1855, which cooled the furnace gas first because the hot gas could otherwise set the bag alight. A 1913 paper to the American Institute of Mining Engineers says bag houses were long used only at zinc oxide works and as a helper in extracting lead, before they spread to smelters.

    LessonA cloth filter has to be protected from the heat of the gas it cleans.

    patents.google.comonemine.org

    Credit

    S. T. Jones; Samuel Wetherill

  2. 1885

    Spinning the dust out

    John M. Finch of Jackson, Michigan, patented a dust collector for mills and factories (US 325,521, 1 September 1885). Dusty air enters a round case sideways and spins, the dust gathers in the outer layer of the swirl, and that layer is skimmed off through slots into a still chamber where the dust settles. His patent says earlier spinning machines let light dust escape with the air, which the skimming was meant to stop. Cyclones, the cone-shaped separators now common in plants, work on the same spin.

    patents.google.com

    Credit

    John M. Finch, for the Knickerbocker Company

  3. 1907

    Charged wires clean smelter smoke

    Frederick Gardner Cottrell of Berkeley, California, applied on 9 July 1907 for a patent on separating particles from gas "by the application of electric charges" (US 895,729, granted 11 August 1908). The device, the electrostatic precipitator, charges the particles and pulls them onto plates of opposite charge; the National Inventors Hall of Fame puts its capture at 90 to 98% of particles. At the Selby Smelting and Lead Company near San Francisco it turned a heavy white plume of sulfuric acid mist into an occasional thin puff by October 1907, but more than two years of work on the roaster stack failed, and the smelter had to install new roasters. In 1912 Cottrell gave his precipitator patents to a new nonprofit, Research Corporation, to fund university science.

    LessonA precipitator works only on gas that suits it; one plant had a stack it could clean and one it could not.

    patents.google.comebsco.cominvent.org

    Credit

    Frederick Gardner Cottrell, with the International and Western Precipitation companies

  4. 1956

    Air pulses clean the bags

    A bag filter has to be cleaned of the dust cake that builds on it. In a pulse-jet collector a burst of compressed air is forced down a bag and expands it sharply, throwing the dust off, so the unit needs less cloth and, in some cases, no spare compartment to take offline for cleaning. Nederman MikroPul says the company, which began in the 1920s as Pulverizing Machinery of Linden, New Jersey, invented and patented the pulse-jet collector in 1956. By 1998 the US Environmental Protection Agency's cost manual reported that "the majority of newly erected baghouses are pulse jets", because they take less space and are seen as cheaper, though they run at higher pressure drop.

    nedermanmikropul.comepa.gov

    Credit

    MikroPul, by its own account

  5. 2003

    A collector explodes in Indiana

    On 29 October 2003 explosions fueled by aluminum dust at the Hayes Lemmerz wheel plant in Huntington, Indiana, badly burned two workers, one of whom died, and injured a third. The US Chemical Safety Board (CSB) found the blast likely began in the dust collector of the scrap-processing system, and that the collector had not been designed to the fire code for it, NFPA 651. The report cites data that more than a quarter of dust explosions in the US, UK and Germany, and more than 40% in the US, happen in dust collectors, because collectors are everywhere, concentrate the finest dust, and often use pulse cleaning, which raises dust clouds inside them.

    LessonThe machine that removes dust is also where it is most concentrated; the CSB's request that the Aluminum Association research explosion protection for aluminum dust collectors was closed as "Unacceptable Action/No Response Received".

    csb.govcsb.gov

    Credit

    US Chemical Safety Board

  6. 2014

    China caps power plant dust

    In 2014 China set "ultra-low emissions" standards for coal-fired power units: 10 mg of particulate matter per cubic meter of exhaust, alongside 35 mg for sulfur dioxide and 50 mg for nitrogen oxides, which the authors below call tighter than any other country's. Using hourly data from stack monitors covering 96 to 98% of China's thermal power capacity, Ling Tang and colleagues found that the sector's particulate emissions fell 72% from 2014 to 2017, and that measured emissions were 18 to 92% below other recent estimates.

    nature.com

    Credit

    China's government (the standard); Ling Tang and colleagues, Nature Energy, 2019 (the measurement)

Watch for

  1. Catalyst inside the filter bag

    Pleated filter bags that hold cartridges of SCR catalyst, which turns nitrogen oxides (NOx) into nitrogen with the help of injected ammonia, were run in a wood waste boiler as part of its routine emission control. The authors report stable pressure drop, steady NOx reduction, and no mechanical or catalyst problems during the trial, so one unit did the work of a dust filter and a separate NOx reactor.

    Achieved whenan outside party, such as the plant's regulator or an independent stack tester, publishes dust and NOx results from at least a year of operation.

    filtech.de

    Claimed by

    Y.-O. Park, D.-K. Shin and K.-D. Kim of Daehan PNC, with S.-D. Kim of the Korea Institute of Energy Research, FILTECH 2026 conference, Cologne, June to July 2026

Open

  1. 01

    Curves from working cyclones

    A public set of grade-efficiency curves, the share of particles a cyclone catches at each particle size, for cyclones running in real plants, each with the cyclone's dimensions, gas flow and dust type, and a check of the usual design models against them.

    The brief
    Credit · unclaimed
  2. 02

    Which protections were there

    A public table of dust collector fires and explosions, each tagged with the protection the collector had (explosion vent, isolation valve, suppression system, spark detection), whether each worked, and the dust involved, drawn from investigation reports and news coverage.

    The brief
    Credit · unclaimed

Open 01 · the brief

Curves from working cyclones

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public set of grade-efficiency curves, the share of particles a cyclone catches at each particle size, for cyclones running in real plants, each with the cyclone's dimensions, gas flow and dust type, and a check of the usual design models against them.

Why it is still open

Edoardo Bregolin, Piero Danieli, Massimo Masi and Zushu Li write that experimental data to validate cyclone models on industrial cyclones "are not available in the literature"; their own 2026 campaign covered cyclones at steel-scrap shredding plants only. Their 2024 machine-learning models were trained on laboratory data taken from the literature.

doi.orgdoi.org

Built with what exists

dust from the cyclone's hopper (what it caught) and the size data from the plant's routine stack tests (what escaped), both collected by plant staff in the normal course of work; a laser diffraction particle sizer at a university or contract lab; Python to compute the curves and run the models, including the Mothes and Löffler (1988) model that Bregolin and colleagues extend; Zenodo to publish.

  1. First step

    Write to ten plants, or the cyclone makers that serve them, starting with sawmills, grain handlers and cement plants, asking for a hopper sample and the particle size results from their last stack test.

  2. Done looks like

    Curves for at least 20 cyclones from at least five industries, published under an open license with each cyclone's geometry and flow, and a table of each model's prediction error against them.

Open 02 · the brief

Which protections were there

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public table of dust collector fires and explosions, each tagged with the protection the collector had (explosion vent, isolation valve, suppression system, spark detection), whether each worked, and the dust involved, drawn from investigation reports and news coverage.

Why it is still open

Dust Safety Science, which has logged combustible dust incidents worldwide since 2016, sums up the materials, industries and equipment involved, not which protections were fitted. The CSB's call for research on explosion protection for aluminum dust collectors was closed without action. A 2026 review of baghouse explosions by Francesco Pinna and colleagues at the University of Cagliari ranks collectors among the equipment most often involved in dust explosions from 2016 to 2023, and says the evidence is fragmented and that descriptions of the collector's state are often missing.

dustsafetyscience.comcsb.goviris.unica.it

Built with what exists

CSB investigation reports, the Dust Safety Science incident database, OSHA's accident search and news archives; a large language model such as Claude to read each report and fill in a fixed yes-or-no form (the Notes "Seven more flagged" and "A thousand questions, one pass" cover models reading long documents and scoring many yes-or-no questions); a second person to check; a spreadsheet published on GitHub.

  1. First step

    Gather every CSB report that names a dust collector and tag the first 20 by hand to settle the form.

  2. Done looks like

    At least 150 collector incidents tagged, each with a link to its source, and a human check of 30 rows picked at random agreeing with the model on at least 90% of fields.