BRENNEN

Industries / Industrial equipment and services / Industrial distribution

Product lines

Choosing which makers' goods to carry, under what terms and in which territory, and keeping each maker's product data in a form that distributors' and customers' systems can read.

7

Milestones achieved, from 1925 to 2020.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1925

    A maker's supply arm leaves

    Western Electric, the Bell System's equipment maker, opened a supply department in 1890 that resold other makers' electrical goods, and in 1925 spun it off as Graybar Electric Company, which opened on 11 December 1925. Its employees bought it for $9 million in a sale that closed on 1 January 1929, and in 1934 Graybar dropped its own appliance brand to remain a distributor of other makers' goods. Its annual report for 2025 says it buys about two million products from more than 6,000 makers and suppliers, and that most of its supplier agreements are nonexclusive and can be ended by either side on 30 to 90 days' notice.

    LessonA distributor holds most of its lines on terms either side can end within weeks.

    worldradiohistory.comsec.gov

    Credit

    Western Electric; Albert Salt, Graybar's first president; Graybar's employees

  2. 1977

    Territories judged case by case

    A maker often limits where its resellers may sell, for example by naming a set number of dealers per area or tying each to approved locations. In Continental T.V. v. GTE Sylvania, decided on 23 June 1977, the US Supreme Court overruled its 1967 Schwinn decision, which had banned such limits outright once the reseller owned the goods, and held that they must be judged by their actual effect on competition, a test called the rule of reason. The case concerned the store locations Sylvania allowed its television retailers, but the rule covers the territories makers give distributors.

    law.cornell.edu

    Credit

    Justice Lewis Powell, writing for the Court

  3. 1991

    A shared product classification

    In 1991 the Dutch electrical installers' association started ETIM, which became a classification for technical products: each class of product has a fixed list of features, so that every maker describes, say, a circuit breaker with the same fields. Wholesalers joined early and makers formally took part by 2006; ETIM Germany was founded in 1999, six national groups founded ETIM International in 2008, and it had 21 member countries by 2019. The model is free to use under an open data licence.

    etim-international.cometim-international.com

    Credit

    the Dutch electrical installers' association; ETIM International

  4. 1998

    One database for electrical items

    The US National Electrical Manufacturers Association (NEMA) and the National Association of Electrical Distributors (NAED) formed the Industry Data Exchange Association (IDEA) in 1998. Its Industry Data Warehouse (IDW), which grew out of NEMA's earlier Product Descriptor Database, is where makers load product data and where distributors pull it to update their own systems. From 1 February 2015 IDEA required every new item to carry 43 "critical" fields that distributors had named as necessary to do business, and every active item by 1 October 2015, measured through a Data Certification Program.

    ewweb.comewweb.comelectricalmarketing.com

    Credit

    NEMA and NAED

  5. 2016

    Buy only from authorized sources

    A US defense purchasing rule effective 2 August 2016, written under section 818 of the National Defense Authorization Act for 2012, requires Department of Defense contractors, except in limited cases, to buy electronic parts from their original makers or the makers' authorized suppliers, and to inspect, test and authenticate parts bought anywhere else (clause DFARS 252.246-7008, Sources of Electronic Parts). It turned a maker's list of authorized distributors from a sales label into a condition of government work.

    federalregister.gov

    Credit

    the US Congress; the Department of Defense

  6. 2020

    Two large distributors combine

    WESCO International completed its merger with Anixter International on 22 June 2020. The combined company reported 2019 sales of about $17.2 billion, about 18,900 employees and relationships with more than 30,000 suppliers, selling electrical, communications and utility products in more than 50 countries.

    sec.gov

    Credit

    WESCO International, led by John Engel; Anixter International

  7. 2020

    A maker trims its distributors

    Texas Instruments (TI), a chipmaker, said in October 2019 that as it built direct relationships with customers it would need fewer distributors, and Avnet disclosed that TI would end their relationship by 31 December 2020; eeNews Europe reported that TI parts made up about 10% of Avnet's $19.5 billion of 2019 sales. TI says it finished moving to one worldwide distributor plus a few regional ones during 2020, a year when about half its revenue still came through distributors. In 2025 more than 80% of TI's revenue was direct, including sales on its own website, and less than 20% came through distributors.

    LessonA maker that builds its own ordering and delivery can move most of its sales off distributors' books within five years.

    eenewseurope.comsec.govsec.gov

    Credit

    Texas Instruments

Watch for

  1. ETIM 11.0 due in December

    ETIM International's technical committee set the plan for the next version of the classification: change requests closed on 30 June 2026, open requests were to be processed by 15 October, a one-month beta release follows, and the final release of ETIM 11.0 is planned for 1 December 2026.

    Achieved whenETIM 11.0 is released for download and national ETIM organizations begin accepting product data in its classes.

    etim-international.com

    Claimed by

    ETIM International, January 2026

Open

  1. 01

    Check sellers' authorized claims

    A public tally of online listings that call a seller an authorized distributor of an industrial brand, each checked against the maker's own published distributor list or locator. For example: 20 brands of motors, drives, sensors, valves and controllers, 25 listings for each from marketplaces and distributors' own sites, each coded as confirmed, not listed, or listed only for another region or product line.

    The brief
    Credit · unclaimed
  2. 02

    Fill product data from datasheets

    A public test of AI models that read a maker's datasheet and fill in the ETIM features for the product's class, such as rated current, coil voltage and number of poles for a contactor, scored against values checked by hand: 500 products in 20 ETIM classes from at least 10 makers.

    The brief
    Credit · unclaimed

Open 01 · the brief

Check sellers' authorized claims

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public tally of online listings that call a seller an authorized distributor of an industrial brand, each checked against the maker's own published distributor list or locator. For example: 20 brands of motors, drives, sensors, valves and controllers, 25 listings for each from marketplaces and distributors' own sites, each coded as confirmed, not listed, or listed only for another region or product line.

Why it is still open

Brands pay enforcement firms for seller audits that cross-check marketplace sellers against the brand's own list of authorized partners, and the results stay with the brand. Makers publish their lists one locator at a time, and although the US Department of Defense has required authorized sources for electronic parts since 2016, I found no published tally of how often "authorized" claims hold for industrial brands (searches in November 2026).

metricscart.comfederalregister.gov

Built with what exists

Makers' distributor locator pages and published distributor lists; a headless browser such as Playwright to save each listing page; an AI model to pull out each seller's name and claim; a spreadsheet for hand checks, with an email to the maker for unclear cases.

  1. First step

    Pick five brands whose makers publish a searchable distributor locator and record 25 listings for each.

  2. Done looks like

    500 listings coded, two people agreeing on at least 95% of the codes, the saved pages published, and the share of confirmed claims reported by brand and by marketplace.

Open 02 · the brief

Fill product data from datasheets

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public test of AI models that read a maker's datasheet and fill in the ETIM features for the product's class, such as rated current, coil voltage and number of poles for a contactor, scored against values checked by hand: 500 products in 20 ETIM classes from at least 10 makers.

Why it is still open

Distributors depend on makers to fill these fields, which is why IDEA made 43 of them mandatory in 2015. Published tests of AI extraction use web shop text, not datasheets or ETIM features: ExtractGPT reports GPT-4 at an average F1 score (a measure that combines how many extracted values are right and how many of the true values are found) of 85% on product offers from online shops, and a 2023 study worked from shop pages coded with GS1's retail product classification. Work on datasheets themselves serves circuit designers: D2S-FLOW (Chen, Xu and Zhang, 2025) pulls the electrical parameters needed for SPICE circuit models from chip datasheets and reports an F1 score of 0.92, with no ETIM classes involved. Vendors already sell the job itself: Anglera, now owned by the search company Coveo, offers distributors AI that fills product records from supplier files, labels and spec sheets, and its site gives no accuracy figure on a shared test. ETIM's own validation tool checks a data file against the ETIM schema and classification, not against the datasheet, and is open only to members.

electricalmarketing.comarxiv.orgarxiv.orgarxiv.organglera.cometim-international.com

Built with what exists

The ETIM classification model, free under an open data licence; datasheet PDFs from makers' websites; pdftotext or pdfplumber; AI models that read PDFs, such as Claude, Gemini and GPT; Label Studio, an open labeling tool, for the hand labels.

  1. First step

    Download the current ETIM model, choose five classes with long feature lists, and hand-label the features of 50 datasheets.

  2. Done looks like

    500 labeled products released with links to their datasheets, and per-feature accuracy for at least three models, including the share of features each model left blank or filled wrongly.