Industries / Energy, water and waste / Fuel jobbers and wholesale fuel
Buying at the terminal
Buying at the terminal is the work of getting fuel from a supplier's storage depot: choosing branded or unbranded supply, agreeing the contract, and loading tank trucks at the rack, the row of loading arms where trucks fill.
6
Milestones achieved, from 1900 to 2023.
2
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1900
Bulk stations in every town
From the 1880s into the early 1900s a "station" meant a bulk storage depot, not a filling station. Depots sat on a railroad or a pipeline, held kerosene and some gasoline in tanks of about 16,000 to 17,000 gallons each, and were the hubs from which tank wagons carried fuel to local buyers. Standard Oil had about 3,000 such stations in the US in 1900 and 3,573 by 1906, by Williamson and Daum's 1959 count, as cited by the geologist Samuel T. Pees.
Credit
Standard Oil
1978
Brand contracts get protection
The US Petroleum Marketing Practices Act covers franchises, entered into or renewed from 19 June 1978, under which a refiner lets a distributor (the Act's word for a jobber) or a retailer sell fuel under the refiner's brand. A refiner may end such a franchise or refuse to renew it only on grounds the Act lists, such as the franchisee's failure to keep a term of the contract that is reasonable and of material significance.
Credit
US Congress
1983
Vapor caught at the rack
A US Environmental Protection Agency (EPA) standard of 18 August 1983, for bulk gasoline terminals built or changed after 17 December 1980, requires each loading rack to have a system that collects the vapor pushed out of a tank truck as it fills. Emissions from that system may not exceed 35 milligrams of organic compounds per litre of gasoline loaded. The terminal may load only trucks with papers showing they are vapor-tight, and must record each truck's tank number.
Credit
US EPA
1994
One coupler for Europe's tankers
EU Directive 94/63/EC of 20 December 1994 requires every terminal that loads road tankers to have at least one gantry for bottom loading, in which the tanker fills through couplings at its base while a second hose carries the vapor away. The couplings are a common design: a 4-inch (101.6 mm) liquid coupler and a 4-inch vapor coupler as defined in the American Petroleum Institute's Recommended Practice 1004, with a normal loading rate of 2,300 litres a minute per arm. National laws were due by 31 December 1995, and nine years later the design applied to all road-tanker gantries except at the smallest terminals.
Credit
European Parliament and Council; American Petroleum Institute (RP 1004)
1995
Detergent added at the rack
From 1 January 1995 all US gasoline had to contain a detergent additive that limits deposits in engines. No standard test could measure the detergent in gasoline, so the EPA made blenders, typically terminals that inject the additive as each truck loads, keep metered records of additive and gasoline and reconcile them every month. The EPA refused a quarterly check because a typical terminal loads about 2,500 trucks a quarter, too many to average.
Lessonwhere no laboratory test can check a fuel, the injector's records become the check.
Credit
US EPA; the American Petroleum Institute proposed the name "volumetric additive reconciliation" for the records
2023
Kenya buys by state deal
Since April 2023 much of Kenya's fuel has come under a government-to-government deal, signed in March 2023 after the fuel shortages of 2022 and a falling shilling, with the state oil companies Saudi Aramco, ADNOC and ENOC. The suppliers give 180 days' credit; Kenyan oil marketing companies pay in shillings into escrow accounts, and five nominated local marketers act as lead importers. The fuel then moves to Kenya Pipeline Company depots, where each marketer holds its own allocation. The deal was renewed in April 2025 for two more years.
Credit
Government of Kenya
Watch for
A refinery skips the depots
Dangote Petroleum Refinery in Nigeria said it would sell fuel straight to filling stations, factories, telecom firms and other large users, with 4,000 new trucks that run on compressed natural gas, and would give buyers of 500,000 litres two weeks' credit on another 500,000 litres. That bypasses the depot owners and traders who resell refinery output. The start slipped from August 2025; the Independent Petroleum Marketers Association of Nigeria said in September 2025 that the trucks had begun delivering to its members' stations at no charge.
Achieved whenNigeria's downstream regulator or another outside party publishes, month by month, how much of the country's petrol reaches stations directly from the refinery.
Claimed by
Dangote Petroleum Refinery, June 2025
Orders sent straight to racks
Tandem Concepts, a South Carolina software company, sends a carrier's order to the terminal's loading system before the truck arrives, so the driver no longer types the product and volume into a keypad at the rack, and the electronic bill of lading comes back as soon as loading ends. In the company's own comparison of 40 loads, all 40 of its electronic bills of lading were correct and 6 of the drivers' manual entries were wrong. Phillips 66 switched it on at 10 terminals in 2025 after a 2023 test.
Achieved whena terminal operator or carrier publishes error counts and loading times for at least 1,000 loads before and after the change.
Claimed by
Tandem Concepts, reported by Bulk Transporter, December 2025
Open
01
Terminals mapped outside the US
A free, open table of the fuel terminals that load trucks in a group of countries outside the US, starting with the EU, the UK and East Africa. Each row gives location, operator, products and number of loading gantries, and ties to a public record or a satellite image.
The briefCredit · unclaimed02
Supply contracts, clause by clause
A public, labeled set of wholesale fuel supply contracts, marked for clause types specific to the trade: the price basis (for example, a set number of cents over the posted rack price), branded or unbranded supply, allocation in a shortage, minimum volumes, incentives that must be repaid if the contract ends early, and grounds for ending it. Then a test of how well AI models find and summarize those clauses.
The briefCredit · unclaimed
Open 01 · the brief
Terminals mapped outside the US
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A free, open table of the fuel terminals that load trucks in a group of countries outside the US, starting with the EU, the UK and East Africa. Each row gives location, operator, products and number of loading gantries, and ties to a public record or a satellite image.
Why it is still open
The US has free terminal maps, such as the Homeland Security layer of terminals with at least 50,000 barrels of storage, and the IRS directory of approved terminals. Worldwide terminal databases are sold by firms such as Industrial Info Resources. OpenStreetMap has no clean tag for them: on 19 November 2026 its tag statistics counted 301 objects tagged industrial=fuel_depot, against 137,167 tagged industrial=oil, a value also used for oil fields and refineries.
portal.datarescueproject.orgirs.govindustrialinfo.comtaginfo.openstreetmap.orgtaginfo.openstreetmap.org
Built with what exists
OpenStreetMap and its Overpass query service; free Copernicus Sentinel-2 satellite images; national depot lists such as Kenya Pipeline Company's; QGIS; an AI vision model that flags tank farms for a person to confirm.
First step
Pull every OpenStreetMap object in one country tagged industrial=fuel_depot, or tagged as a storage tank holding fuel, and check 20 of them against satellite images.
Done looks like
Every truck-loading terminal in at least 10 countries listed with coordinates and operator; 50 rows drawn at random checked by a second person against satellite images, with at least 95% correct; the table released under an open license.
Open 02 · the brief
Supply contracts, clause by clause
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public, labeled set of wholesale fuel supply contracts, marked for clause types specific to the trade: the price basis (for example, a set number of cents over the posted rack price), branded or unbranded supply, allocation in a shortage, minimum volumes, incentives that must be repaid if the contract ends early, and grounds for ending it. Then a test of how well AI models find and summarize those clauses.
Why it is still open
Many such contracts are public as exhibits to company filings: a full-text search of the SEC's EDGAR filings on 19 November 2026 found 238 filings that mention both "Petroleum Marketing Practices Act" and "supply agreement". The largest open contract-label set, CUAD, marks 41 clause types in 510 commercial contracts, chosen for reviewing contracts in corporate deals, not for fuel supply. Lawyers' checklists for jobber contracts name the terms, such as price over net rack, incentives and termination, but give no labeled examples.
Built with what exists
EDGAR full-text search; CUAD's label format; Label Studio, an open labeling tool; AI models that read long documents and pull out facts (Note: "Seven more flagged").
First step
Download 20 of the contracts the EDGAR search finds and draft the clause list from them.
Done looks like
At least 100 contracts labeled for at least 10 clause types by two people who agree on at least 90% of labels, released openly, with scores for at least three AI models.