BRENNEN

Industries / Food, farming and forestry / Forestry and logging

Forest inventory and planning

Measuring what grows in a forest and how fast, and deciding where and when to cut.

5

Milestones achieved, from 1921 to 2013.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1921

    A whole country counted

    Finland began a national forest inventory in 1921 and finished fieldwork across the country by 1924, measuring sample stands rather than every tree. Finland's Natural Resources Institute (Luke) says Norway started its inventory earlier and Sweden began in 1923, but Finland was the first to complete one. The survey now repeats every five years and records more than 100 variables for each sampled stand.

    LessonPlots measured the same way, time after time, can describe a whole nation's forest.

    luke.fi

    Credit

    the Finnish national forest inventory, now run by Luke

  2. 1928

    A forest census by law

    The US Congress passed the McSweeney-McNary Act, which told the Secretary of Agriculture to "make and keep current a comprehensive inventory and analysis of the Nation's forest resources". The program it started, now called Forest Inventory and Analysis, later moved from periodic surveys to surveying each state every year, on a national network of permanent plots remeasured every five to ten years.

    research.fs.usda.gov

    Credit

    US Congress and the USDA Forest Service

  3. 1972

    Forests seen from orbit

    NASA launched the Earth Resources Technology Satellite, later renamed Landsat 1, on 23 July 1972. Its scanner saw the ground at about 80 m resolution and covered about 75% of Earth's surface, and one early image showed the full extent of a fire in Alaska while it was still burning.

    usgs.gov

    Credit

    NASA and the US Geological Survey

  4. 2002

    Laser scans become inventories

    Norwegian inventory companies began estimating tree height and timber volume for every stand from airborne laser scanning, or lidar, which measures the height of the canopy with laser pulses fired from a plane. The method links a sample of precisely placed field plots to the laser data and applies the result to the whole area. A 2013 paper says the companies' procedures had "remained largely unchanged since the introduction of the area-based method in 2002".

    silvafennica.fi

    Credit

    Erik Næsset, who published the area-based method in 2002, and Norwegian inventory companies

  5. 2013

    Forest change mapped worldwide

    A team led by M. C. Hansen used satellite images to map forest loss and gain for the whole world from 2000 to 2012 at 30 m resolution. They counted 2.3 million km² lost and 0.8 million km² gained, and found the highest rates of change in subtropical forests under intensive forestry.

    usgs.gov

    Credit

    M. C. Hansen and co-authors, Science (2013)

Watch for

  1. Biomass maps from radar

    ESA's Biomass satellite, launched on 29 April 2025, carries a P-band radar, whose signal passes through the leaves to measure the wood, which ESA uses as a measure of stored carbon. ESA calls it the first satellite with such a radar. On 26 January 2026 ESA said the satellite had finished commissioning and its data were open to all, and it showed estimated forest carbon in tonnes per hectare across Gabon and the Republic of the Congo. ESA is still comparing the satellite with airborne radar to check its calibration.

    Achieved whengroups outside ESA publish Biomass carbon estimates checked against field plots, with the error stated.

    esa.int

    Claimed by

    European Space Agency, January 2026

Open

  1. 01

    Draft plans for small owners

    A software agent that drafts a forest management plan for a family woodlot from free public data: national lidar, soil maps, forest inventory plots and aerial photos. A licensed forester reviews, corrects and signs each plan.

    The brief
    Credit · unclaimed
  2. 02

    Biomass maps checked on ground

    A set of field plots in one forest, measured to a standard method and compared with ESA Biomass carbon estimates for the same ground, with all data and code published.

    The brief
    Credit · unclaimed

Open 01 · the brief

Draft plans for small owners

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A software agent that drafts a forest management plan for a family woodlot from free public data: national lidar, soil maps, forest inventory plots and aerial photos. A licensed forester reviews, corrects and signs each plan.

Why it is still open

Only 13% of US family forest owners have a written management plan, according to a Forest Service study of more than 8,000 owners in the National Woodland Owner Survey. A search for this work found lidar inventory services and planning software, but no tool that writes a full plan from public data.

phys.org

Built with what exists

USGS 3D Elevation Program lidar, USDA soil survey data (SSURGO), Forest Inventory and Analysis plot data, the lidR package for R, and a general AI model such as Claude or Gemini for the written sections.

  1. First step

    Download one state's forest stewardship plan template and draft a plan for one parcel whose owner agrees to take part.

  2. Done looks like

    Ten draft plans for real parcels, each scored by two foresters against their state's plan standard, with forester hours per plan compared with plans written the usual way.

Open 02 · the brief

Biomass maps checked on ground

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A set of field plots in one forest, measured to a standard method and compared with ESA Biomass carbon estimates for the same ground, with all data and code published.

Why it is still open

Biomass data became open in January 2026, and ESA reports its own calibration check as still under way, with no figures yet on how close the estimates are.

esa.int

Built with what exists

Biomass data from ESA, a diameter tape, a laser rangefinder for tree height, published equations that turn trunk width and height into dry weight for the local species, and Python.

  1. First step

    Download the Biomass products that cover a forest you can reach, and choose plot sites that sit wholly inside single satellite pixels.

  2. Done looks like

    At least 30 plots with measured biomass in tonnes per hectare set against the satellite value, with the average difference and its spread published.