Industries / Consumer goods / Eyewear
Lenses
Designing and making the lenses that correct sight or cut glare: their curves, their material, and the factory and lab steps that grind, mould or print them to a prescription.
7
Milestones achieved, from 1462 to 2025.
3
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1462
Lenses for distance, in stock
On 21 October 1462 Duke Francesco Sforza of Milan asked his ambassador in Florence for three dozen spectacles, including pairs suited to "long sight", that is, for the young. Baldanzi and Farini, drawing on the historian Ilardi's research, call it the first mention of negative (concave) lenses, the kind that correct short sight. The 36 pairs left 14 days after the order, which suggests Florentine makers kept pairs ready to sell. In 1466 the duke's successor ordered pairs graded by age in five-year steps from 30 to 70.
LessonReady-made lenses in graded steps are older than the eye exam. Buyers most likely tried pairs on until one suited, Baldanzi and Farini note.
Credit
Florence's spectacle makers; the historian Ilardi, who found the letters
1825
A lens for astigmatism
The astronomer George Biddell Airy described astigmatism, an eye that focuses differently along different directions, together with its correction by a cylindrical lens, which bends light along one direction more than the other. The University of St Andrews' history of mathematics archive dates this to 1825, and his paper was printed in 1827. The Garrison-Morton medical bibliography says he was the first to devise a sphero-cylindrical lens.
Credit
George Biddell Airy
1959
A lens with no line
Benjamin Franklin wrote in August 1784 of his "double spectacles", two half-lenses in one frame for distance and near; the College of Optometrists, quoted in 2011, calls it uncertain that he invented them. In 1959 the French company Société des Lunetiers launched Varilux, designed by Bernard Maitenaz, a lens whose power changes smoothly from distance to near with no visible line. The industry historian Werner Köppen calls it the first commercial progressive lens, and EssilorLuxottica says more than 700 million Varilux lenses had been sold by 2021.
ushistory.orgoptometricmanagement.comwernerkoeppen.comessilorluxottica.com
Credit
Bernard Maitenaz and the Société des Lunetiers, later part of Essilor
1964
Lenses that darken outdoors
W. H. Armistead and S. D. Stookey of Corning reported in Science in April 1964 a glass that darkens in sunlight, made sensitive by silver halide crystals, and Corning sold such lenses as PhotoGray. Plastic took longer. American Optical's Photolite plastic lens did not sell. Transitions Optical, formed in 1990 by PPG (51 percent) and Essilor (49 percent), sold about 800,000 pairs in 1991, held back because the lenses did not get dark enough or change fast enough. A second-generation lens from late 1992 sold more than a million pairs between November 1992 and February 1993.
LessonThe first plastic version failed on performance. Sales came only with a darker, faster second version.
Credit
W. H. Armistead and S. D. Stookey (Corning); PPG and Essilor (Transitions Optical)
1972
Lenses must survive impact
The US Food and Drug Administration (FDA) ruled that the shattering of ordinary glass lenses was "an avoidable hazard" and that eyeglass and sunglass lenses must resist impact. The test drops a 5/8-inch steel ball weighing about 0.56 ounce from 50 inches onto the lens. The trade historian Joseph Bruneni dates the ruling to 1972. PPG had developed the CR-39 plastic in 1940, Armorlite brought out CR-39 lenses in 1947, and by 1990, 60 percent of spectacle lenses were plastic.
LessonA safety rule can move a market to a new material. Glass lenses had to be at least 2.2 mm thick to pass, by Bruneni's account, and that helped lighter plastic lenses replace them.
law.cornell.edueyecarebusiness.comeyecarebusiness.comeyecarebusiness.comabdo.org.uk
Credit
US FDA; PPG and Armorlite
1997
Each lens cut to order
In free-form surfacing, a computer-controlled machine in the prescription lab cuts the whole progressive design straight onto the back of each lens. Before, a lab ground the prescription behind a front surface moulded in advance. This made lenses calculated for one wearer practical. Köppen says Seiko introduced the first free-form progressive in 1997, and that Rodenstock (Impression ILT) and Zeiss (Gradal Individual) followed in 2000. The first is disputed: in 2013 the lab software maker Ocuco asked the US Patent Office to re-examine Seiko Epson's patent, arguing that patents going back to the 1930s anticipated the idea.
Credit
Seiko Epson; Rodenstock; Zeiss
2025
Glasses that slow myopia
In a randomised trial at Hong Kong Polytechnic University (PolyU) of 183 children aged 8 to 13, short sight progressed 52 percent more slowly in children wearing Hoya's DIMS lenses, which carry small segments adding +3.50 D of focus, than in children wearing ordinary lenses (Lam et al., 2020). On 25 September 2025 the FDA authorized Essilor's Stellest lenses for children aged 6 to 12, calling them the first eyeglass lenses to slow the progression of childhood myopia. The study it reviewed showed 71 percent less progression over 24 months.
Credit
Lam and colleagues at PolyU, with Hoya; Essilor
Watch for
Myopia halted for a year
Hoya says that in a 12-month randomised trial of 196 Hong Kong children aged 4 to 12, its MiYOSMART iQ lenses showed no myopia progression on average, against −0.53 D with ordinary single-vision lenses. The results were presented at the ARVO eye research meeting in May 2026 and rest on conference abstracts and Hoya's own data.
Achieved whena peer-reviewed paper reports at least two years of results, or a regulator such as the FDA authorizes the lens on this evidence.
Claimed by
Hoya Vision Care, with PolyU, May 2026
Lenses printed with light
The Spanish lens maker IOT says its Light-Form process makes a complete progressive lens "in a few seconds, in a single step, using a single flash of light", with no cutting or polishing. It says the process uses 90 percent less energy and makes 76 percent less waste than conventional manufacturing. The first lenses reached consumers in Madrid through VisionLab in October 2026. Azul 3D, a Northwestern University spin-out, says its printed lenses meet optical standards without naming which.
Achieved whenan outside lab finds bought printed lenses within ISO 21987 or ANSI Z80.1 tolerances and they pass the FDA drop-ball test.
Claimed by
IOT, October 2026; Azul 3D, July 2026
A progressive designed with AI
Essilor says its Varilux Shift progressive lens was designed "with AI and millions of wearer data points" and that 91 percent of wearers in a study adapted to it. It gives no method or sample size.
Achieved whenan independent, masked wearer trial against a standard progressive lens is published.
Claimed by
Essilor, July 2026
Open
01
Printed lenses, measured
An independent, published test of 3D-printed prescription lenses against the tolerances finished lenses must meet, with conventionally made lenses of the same prescriptions as a control.
The briefCredit · unclaimed02
A phone that reads progressives
A phone method, with or without a cheap add-on, that reads both the distance power and the reading addition of an existing progressive or bifocal pair, tested in the open against an automatic lensmeter. The reading addition is the extra power in the lower part of the lens. The tool reads lenses; it does not prescribe.
The briefCredit · unclaimed
Open 01 · the brief
Printed lenses, measured
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
An independent, published test of 3D-printed prescription lenses against the tolerances finished lenses must meet, with conventionally made lenses of the same prescriptions as a control.
Why it is still open
The makers say their printed lenses meet standards but name none and cite no outside test (IOT, October 2026; Azul 3D, July 2026). Independent tests so far have covered conventionally made glasses ordered online (Citek et al., 2011, under Fitting), not printed lenses.
visionmonday.commeddeviceguide.comchemistry.northwestern.edu
Built with what exists
Printed lenses bought through VisionLab in Spain or any other seller; a calibrated automatic lensmeter; the ISO 21987 and ANSI Z80.1 tolerance tables; a drop-ball rig built to the US rule (a 5/8-inch steel ball dropped from 50 inches); a lamp and camera to record cosmetic flaws.
First step
Buy the two standards, choose 10 test prescriptions from the team's own glasses, and ask IOT and VisionLab whether lenses can be ordered for testing.
Done looks like
At least 30 printed and 30 conventional lenses, each passed or failed on sphere, cylinder, axis, addition, prism and impact, with the data and method published.
Open 02 · the brief
A phone that reads progressives
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A phone method, with or without a cheap add-on, that reads both the distance power and the reading addition of an existing progressive or bifocal pair, tested in the open against an automatic lensmeter. The reading addition is the extra power in the lower part of the lens. The tool reads lenses; it does not prescribe.
Why it is still open
Phone lens readers with published accuracy stop at single-vision lenses. The Luna lens scanner app, made by 6over6, covers single-vision lenses from −6.00 to +3.00 only. EyeNetra's Netrometer, a phone add-on, draws a power map of progressive lenses, but its paper reports accuracy only for single-vision glasses (10 pairs measured by 16 users). A 3D-printed phone lensmeter from PolyU, presented in 2025, was validated on spherical and cylindrical lenses only.
Built with what exists
A phone camera and screen; a printed or on-screen target pattern; OpenCV; an optional 3D-printed holder; an automatic lensmeter as the reference.
First step
Gather 50 progressive pairs, for example from an eyeglass donation bin, and record a lensmeter reading and phone images of each.
Done looks like
On 100 progressive pairs, the reading addition within 0.25 D of the lensmeter in at least 90 percent of pairs, with images, readings and code published.