BRENNEN

Industries / Energy, water and waste / Environmental services

Sorting and recycling

Sorting and recycling is the work of separating collected materials by type, mostly at a materials recovery facility (MRF), the plant where recycling is sorted, and turning them back into raw material.

7

Milestones achieved, from 1972 to 2018.

2

To watch for: announced, not yet confirmed outside.

3

Open deliverables. Nobody has shipped them.

In depth

The same ground is charted in more depth, as an industry of its own.

The road

AchievedWatch forOpen

Achieved

  1. 1972

    Machines take back bottles

    In Norway, the brothers Petter and Tore Planke built what TOMRA calls the world's first automated reverse vending machine, which takes back empty drink containers so that shops do not count them by hand. TOMRA was founded on 1 April 1972, and Sweden's state liquor chain, Systembolaget, ordered 100 machines in 1974.

    LessonDemand follows prices and laws: TOMRA left most of its US business in 1985–86 after aluminum prices collapsed, and delivered about 8,800 machines to Germany in 2006 when that country's national deposit system started.

    tomra.com

    Credit

    Petter and Tore Planke, TOMRA

  2. 1983

    Recycling goes to the curb

    Kitchener, Ontario, began collecting household recyclables at the curb in a blue box, and a regional heritage site says that in 1983 "Kitchener introduced the Blue Box to the world." Programs on the same model spread to many cities.

    LessonWho pays can change: between July 2023 and 31 December 2025, Ontario moved its Blue Box program from municipalities to the producers of packaging, who now pay for collection and recycling.

    creativecapitalofcanada.carpra.ca

    Credit

    City of Kitchener

  3. 1988

    Resin codes misread as recyclable

    The plastics industry's trade group created numbered resin codes, 1 to 7 inside chasing arrows, to tell recyclers what a container is made of, and shoppers read the arrows as "recyclable." ASTM International, which now maintains the code, says it "was never meant to signal the recyclability of a product," and its standard now uses a solid triangle; in 2023 the US EPA urged the Federal Trade Commission to adopt that change.

    LessonA label meant for sorters became a public promise that many programs could not keep.

    eenews.net

    Credit

    Society of the Plastics Industry, now the Plastics Industry Association

  4. 1991

    Makers pay for packaging

    Germany's Packaging Ordinance made the companies that sell packaging responsible for its waste, which the German Environment Agency (UBA) calls the first German law to do so. The idea is now called extended producer responsibility (EPR): makers pay for the waste their products become. Industry set up Der Grüne Punkt, a second collection system beside the public one, which has collected used sales packaging nationwide since 1991.

    LessonUBA says the ordinance's targets were met easily and stopped being ambitious, and Germany replaced it with the stricter Packaging Act on 1 January 2019.

    umweltbundesamt.degruener-punkt.de

    Credit

    German federal government; Der Grüne Punkt – Duales System Deutschland

  5. 1990s

    Sorters that see plastic

    Optical sorters identify each item on a fast belt by the near-infrared light it reflects and push it into the right stream. SINTEF, a Norwegian research institute, developed one for drink cartons and plastic bottles at the request of the carton maker Elopak, whose owner, Ferd, then set up TiTech to build the machines; SINTEF counts more than 800 units delivered in Europe, Japan, Korea, Australia and the US.

    sintef.notomra.com

    Credit

    SINTEF; Elopak and Ferd; TiTech, which TOMRA bought in 2004

  6. 2011

    Robots pick construction waste

    ZenRobotics, a Finnish company founded in 2007, released a robot arm that uses several sensors and machine learning to pick items off a conveyor. A test unit ran on SITA Finland's construction-waste line near Helsinki from 2011, and SITA ordered two more units in December 2012.

    cleantechnica.comprnewswire.co.uk

    Credit

    ZenRobotics; SITA Finland

  7. 2018

    China closes its door

    China had taken 106 million metric tons of plastic waste since 1992, 45.1% of all the world's imports, and in 2017 it announced that it would stop taking most of it. Researchers estimated that 111 million metric tons of plastic waste would be displaced by 2030 as a result.

    LessonRecycling that depends on one export market can lose it at a stroke, and in 2019 the parties to the Basel Convention, the treaty on cross-border waste shipments, brought plastic waste under tighter control from 1 January 2021.

    pmc.ncbi.nlm.nih.govbasel.int

    Credit

    Government of China; estimate by Amy Brooks, Shunli Wang and Jenna Jambeck

Watch for

  1. AI sorting of household trash

    AMP says its AMP ONE plant in Cleveland sorts up to 60,000 tons a year with "no manual intervention." It has signed a 20-year contract with Virginia's Southeastern Public Service Authority (SPSA) to pull recyclables and organic material out of bagged household trash, and guarantees that the region will recycle 20% of its waste.

    Achieved whenSPSA or an outside auditor publishes a full year of measured recovered tonnage of at least 20%, with buyers' figures on the quality of the bales.

    ampsortation.comampsortation.com

    Claimed by

    AMP, July and November 2025

  2. Enzymes that break down PET

    Carbios uses enzymes to break PET, the plastic of drink bottles and polyester cloth, back into its building blocks. It reports 100 batches at its demonstration plant and a validated process for mixed textile waste, but construction of its commercial plant at Longlaville, France, is paused: it missed a financing target of 30 September 2026, and production once planned for the first half of 2028 has no new date.

    Achieved whenLonglaville produces at commercial scale and a buyer or auditor confirms its output and quality.

    carbios.comcarbios.com

    Claimed by

    Carbios, August and September 2026

Open

  1. 01

    Find batteries on the belt

    An open image set of household recyclables moving on a belt with battery-holding items mixed in (vapes, phones, power banks, toys and loose cells), and a detector scored on it.

    The brief
    Credit · unclaimed
  2. 02

    A measured bench-top sorting cell

    A low-cost robot arm over a tray or short belt that learns from a few demonstrations to pick one material, such as clean PET bottles, out of a mix, with its speed and accuracy measured.

    The brief
    Credit · unclaimed
  3. 03

    City lists versus the MRF

    An open dataset for one MRF and every community that sends material to it, lining up what each community tells residents to recycle with what the MRF says it sorts and sells.

    The brief
    Credit · unclaimed

Open 01 · the brief

Find batteries on the belt

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open image set of household recyclables moving on a belt with battery-holding items mixed in (vapes, phones, power banks, toys and loose cells), and a detector scored on it.

Why it is still open

EPA found 245 lithium-ion battery fires at 64 waste facilities and described workers pulling batteries off the line by hand. The open battery image sets show loose cells on their own: RecyBat24 photographed 110 batteries on a dark surface. ZeroWaste, the main open image set from a MRF, has no battery class.

epa.goviris.unical.itai.bu.edu

Built with what exists

A hobby belt conveyor; a phone or Raspberry Pi camera; OpenCV; Ultralytics YOLO; RecyBat24 and ZeroWaste as extra training data; the LFM3 vision model (see the Note "One GPU to fine-tune"). Use emptied device shells and dummy cells, not live batteries.

  1. First step

    Gather 30 emptied battery-holding items, film 200 belt passes of clean recyclables with the items mixed in, and label them.

  2. Done looks like

    At least 2,000 belt images, at least 300 of them with battery items partly hidden under other material. Recall and false alarms per 100 items are published for a held-out set, and the data is released under an open license.

Open 02 · the brief

A measured bench-top sorting cell

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A low-cost robot arm over a tray or short belt that learns from a few demonstrations to pick one material, such as clean PET bottles, out of a mix, with its speed and accuracy measured.

Why it is still open

The closest work found, an entry at the LeRobot Global Hackathon in June 2025, used an SO-101 arm, NVIDIA's GR00T N1.5 model and 124 demonstrations to pick paper out of mixed paper and plastic on a moving belt, and published no pick rate, purity or count of trials.

om-kulkarni.github.io

Built with what exists

An SO-101 arm and Hugging Face's LeRobot software (see the Note "No download"); open robot model weights such as Runway's Praxis-1 (see the Note "Open robot model weights"); for comparison, NVIDIA's report of high success after five demonstrations with GR00T 2, which is not yet downloadable (see the Note "Five demonstrations per task"), and robot programs written by AI agents (see the Note "Readable robot programs"). Clean, dry household items only.

  1. First step

    Assemble an SO-101 and record 50 demonstrations of picking PET bottles from a tray of clean mixed recyclables.

  2. Done looks like

    Twenty filmed five-minute runs on a fixed mix of 100 items, with a published tally of picks per minute, purity (the share of picked items that are the target) and recovery (the share of target items picked), and the number of demonstrations used.

Open 03 · the brief

City lists versus the MRF

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

An open dataset for one MRF and every community that sends material to it, lining up what each community tells residents to recycle with what the MRF says it sorts and sells.

Why it is still open

The Sustainable Packaging Coalition's 2020–21 study of 1,950 US communities found that items listed as accepted "may not be sorted and sold by the receiving MRF," and that communities sending to the same MRF list different items; it called the mismatch outside its scope and asked for further research. The Recycling Partnership's National Recycling Database covers more than 9,000 community programs but records what communities list, not what MRFs accept.

sustainablepackaging.orgrecyclingpartnership.org

Built with what exists

Muse Ember to pull accepted items from web pages and leaflets (see the Note "The jobs agents repeat"); an agent that cites the page behind each cell (see the Note "Findings that cite notes"); Gemini Decision 1 to code each item as accepted, not accepted or unclear (see the Note "A thousand questions, one pass"); The Recycling Partnership's category list; a spreadsheet.

  1. First step

    Pick one MRF that publishes its accepted-materials list, list the communities that send to it, and code their lists by hand for 20 categories.

  2. Done looks like

    Ten MRFs and their communities, in at least two countries, coded into the same categories, with every cell linked to its source, mismatch counts published, and at least three MRF operators confirming or correcting their rows.