Industries / Retail, hospitality and personal services / Dry cleaning and laundromats
Pressing and finishing
Pressing and finishing is the work after cleaning that takes out wrinkles and restores a garment's shape, with steam presses, body forms and tunnels, and the folding of items that are not hung.
4
Milestones achieved, from 1904 to 2013.
2
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1904
A steam press for tailors
The Hoffman Pressing Machine Company was founded in Syracuse, New York, in 1904 to build a foot-operated steam pressing machine, designed by a tailor, that tailors, garment factories and dry cleaners could use in place of heavy hand-held steam irons, by the account in Marist University's archives. By the 1930s its successor, the U.S. Hoffman Machinery Corporation, was one of the largest US makers of laundry and dry-cleaning machinery. The State Coalition for Remediation of Drycleaners dates steam presses in dry cleaning to 1903.
Credit
Hoffman Pressing Machine Company, later U.S. Hoffman Machinery Corporation
1972
Steam tunnels replace presses
A McGraw-Edison patent granted on 22 February 1972 describes "tunnel-type finishers" that carry garments on hangers continuously through a steam chamber and then a hot-air chamber, finishing fabrics that hold their shape "without actually pressing the garment between hot press faces". A 2023 patent from Leonard Automatics of North Carolina calls tunnel finishers "well-known": garments ride on forms, usually held under tension, through loading, steam, hot-air, cool-down and unloading zones, and an operator puts each garment on and takes it off.
LessonThe tunnel took over the pressing but not the dressing of each form, which is still done by hand.
Credit
Michael G. Beeley, Paul W. Frisby and Richard D. Thompson (McGraw-Edison); Jeffrey Neal Frushtick (Leonard Automatics)
2010
A robot folds a towel
A UC Berkeley team had Willow Garage's PR2, a general-purpose robot with two arms, pick up towels it had not seen before from a heap and fold them, succeeding in all 50 single-towel trials; each towel took 1,478 seconds on average, close to 25 minutes. By 2022 a team in Ken Goldberg's Berkeley lab had a two-armed robot fold garments from a crumpled start in under two minutes on average, at 30 to 40 folds an hour.
LessonMost of the robot's time went on finding where to grab the floppy cloth, not on folding it.
Credit
Jeremy Maitin-Shepard, Marco Cusumano-Towner, Jinna Lei and Pieter Abbeel; Yahav Avigal, Lars Berscheid, Tamim Asfour, Torsten Kröger and Ken Goldberg (SpeedFolding)
2013
Finishers that stretch garments
As cleaners moved to wet cleaning, finishing became the step that decides quality: wet-cleaned clothes come out of the dryer with more wrinkles, and water can shrink wool. A 2013 guide from the New York State Pollution Prevention Institute at Rochester Institute of Technology, paid for by the state's environment department, recommends tensioning equipment, such as form finishers and pant toppers that hold a garment taut on a form while it is finished, for any cleaner that wet cleans most of its work or much wool and tailored clothing. At Cleaner by Nature in 1996 and 1997, pressing and shrinkage were equally the second most common reasons a garment came back, after stains.
LessonIn 2021, owners in King County, Washington, still named the manual work of measuring garments before cleaning, to stretch them back afterwards, as a reason to doubt wet cleaning.
Credit
New York State Pollution Prevention Institute; New York State Department of Environmental Conservation
Watch for
Robots in the laundry room
Dyna Robotics says its Dyna-1 model folded napkins for 24 hours without an intervention on the folding itself, and in September 2026 released Dyna-2.1 with Taku, a wheeled robot with two arms, shown running an uncut hour of a hotel laundry room: reaching into a dryer, folding towels and placing stacks on shelves. Cents, a maker of laundromat software, wrote in 2026 that Dyna had installed a folding robot at a Sacramento laundromat and that the system runs at about 60% of a person's speed.
Achieved whena laundry operator or an outside tester publishes items folded per hour, folding faults and human interventions per shift over at least a month of paid work.
Claimed by
Dyna Robotics, September 2026
A home folder with help
Weave Robotics began delivering Isaac 0, a stationary two-armed laundry-folding robot, to homes in the San Francisco Bay Area in early 2026, for $8,000 or $450 a month. When the robot is stuck or makes a mistake, a Weave specialist who sees only its camera takes over the arms for a correction of 5 to 10 seconds on average, the chief executive, Kaan Dogrusoz, told the Association for Advancing Automation; the company says its fleet in commercial laundries folds thousands of pounds of laundry a month. Cents reports 30 to 90 minutes per load.
Achieved whenWeave or a customer publishes the share of items folded with no remote takeover, and the time per load, over a stated number of loads.
Claimed by
Weave Robotics, February 2026
Open
01
A robot that dresses forms
A robot cell that takes a damp, cleaned shirt and puts it on a shirt or body form, straight and clamped, ready for finishing. Test it with the steam and heat off, so no person or robot works near live steam.
The briefCredit · unclaimed02
Shrinkage caught by camera
A counter-top camera station that photographs each garment flat before wet cleaning and again after finishing, measures it, and flags any measurement that changed by more than a set share, so the finisher knows what to stretch back.
The briefCredit · unclaimed
Open 01 · the brief
A robot that dresses forms
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A robot cell that takes a damp, cleaned shirt and puts it on a shirt or body form, straight and clamped, ready for finishing. Test it with the steam and heat off, so no person or robot works near live steam.
Why it is still open
Tunnel and form finishers still need a person to dress each form, as Leonard Automatics' 2023 patent describes. Folding robots from Dyna and Weave work on towels, napkins and everyday laundry, not on finishing equipment, and a search of patents and the web found no robot arm loading a shirt press or form finisher.
Built with what exists
a low-cost two-armed kit run with Hugging Face's open LeRobot software (see the Note "No download"); a robot model trained from a few human demonstrations, such as NVIDIA's GR00T (see the Note "Five demonstrations per task"); an unheated shirt form or dress form; a phone camera to film every attempt.
First step
Film a skilled finisher dressing a form 50 times, then steer a two-armed kit by remote control through the same motions 20 times to collect training data.
Done looks like
100 filmed attempts on 20 different shirts, with a published tally of shirts placed straight with collar and shoulders seated, the time per shirt beside a skilled person's, and each failure sorted by cause.
Open 02 · the brief
Shrinkage caught by camera
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A counter-top camera station that photographs each garment flat before wet cleaning and again after finishing, measures it, and flags any measurement that changed by more than a set share, so the finisher knows what to stretch back.
Why it is still open
King County's program found cleaners wary of measuring garments by hand before wet cleaning (2021), and shrinkage drove most claims at Cleaner by Nature. GarmentIQ, an open-source program first published in March 2025, measures garments from photos for fashion retail, but a search of the web and GitHub found no use of it, or of any similar tool, to check shrinkage in cleaning.
Built with what exists
GarmentIQ (MIT licence); a phone or webcam on a fixed stand over a mat printed with a scale; a laptop; if its measuring points do not cover jackets and trousers, a small vision model fine-tuned on one graphics chip (see the Note "One GPU to fine-tune").
First step
Photograph and tape-measure 30 garments at a wet-cleaning shop, before and after cleaning, and compare GarmentIQ's numbers with the tape.
Done looks like
on 300 garments, camera and tape measure agree within 0.5 cm on 95% of points, and the station flags every garment that the tape shows changed by more than 2%.