BRENNEN

Industries / Finance and business services / Records management / Document shredding

Recycling

Recycling is what happens to the material after destruction: shredded paper is baled and sold to paper mills, and destroyed or erased drives go to metal recyclers or back into use.

4

Milestones achieved, from 2015 to 2024.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 2015

    Shreds sold as office paper

    Stericycle reported that documents collected by Shred-it are cross-cut shredded and baled to be sold as sorted office paper for recycling, and that it sells nearly all its shredded paper to paper companies and recycled paper brokers, so swings in paper prices can affect its results.

    sec.gov

    Credit

    Stericycle, in its 2015 annual report

  2. 2016

    Trackers follow e-waste

    Investigators from the Basel Action Network, a campaign group that runs the e-Stewards certification for electronics recyclers, left two broken LCD monitors fitted with GPS trackers at a drop-off in Portland, Oregon. They reached Total Reclaim, a Seattle recycler, which exported them overseas several months later. Total Reclaim's co-owner admitted the shipments broke the e-Stewards standard, and its long-held certification was withdrawn for two years.

    LessonA hidden tracker found what the certification audits had not.

    resource-recycling.com

    Credit

    Basel Action Network

  3. 2021

    Fine shreds weaken paper

    Researchers cut sheets of kraft pine pulp into pieces of different sizes and made new paper from them. Pieces smaller than 25 mm² changed the fibres significantly and sharply cut the tensile strength of the new paper. That threshold lies just below the 30 mm² limit for security level P-5.

    LessonThe finest security levels cost recyclability.

    pmc.ncbi.nlm.nih.gov

    Credit

    Aneta Lipkiewicz, Edyta Małachowska, Marcin Dubowik and Piotr Przybysz, in Scientific Reports

  4. 2024

    Most bins refuse shreds

    Earth911, a recycling information service, wrote in September 2024 that most recycling programs do not accept shredded paper in household bins, because staples and other contaminants get mixed in, the fibres are shorter, and small pieces fly about in sorting and jam machinery.

    earth911.com

    Credit

    Earth911

Watch for

  1. Magnets from old drives

    HyProMag opened a plant at Tyseley Energy Park, Birmingham, on 15 January 2026. It uses hydrogen to extract rare earth magnets from scrap, including hard drives, without fully taking products apart. The University of Birmingham says it can recover over 400 kg of magnet alloy per batch and make 100 tonnes of sintered magnets a year on one shift, or over 300 tonnes on several.

    Achieved whenthe plant reports tonnes of magnets actually made from hard drive feed, checked by an outside party.

    birmingham.ac.uk

    Claimed by

    HyProMag and the University of Birmingham, January 2026

Open

  1. 01

    Weigh the lost magnets

    A measured comparison of how much neodymium magnet material is recovered from 500 hard drives shredded whole, against 500 drives whose magnets are removed first and whose platters are then destroyed.

    The brief
    Credit · unclaimed
  2. 02

    Secure and still recyclable

    A test of whether some cut shapes meet a given security level while keeping more of the paper's strength. Shred printed office paper in at least five machines rated P-3 to P-6, make laboratory sheets from each output, and measure their strength and fibre length.

    The brief
    Credit · unclaimed

Open 01 · the brief

Weigh the lost magnets

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A measured comparison of how much neodymium magnet material is recovered from 500 hard drives shredded whole, against 500 drives whose magnets are removed first and whose platters are then destroyed.

Why it is still open

Oak Ridge National Laboratory's patented method cuts off the corner of a drive that holds the magnet, to avoid "materials loss through shredding". Google says erasing keys instead of destroying drives lets it recover magnets. No destruction service was found that publishes how much magnet material it recovers per tonne of drives by either route.

ameslab.govcloud.google.com

Built with what exists

Hand tools and gloves to take drives apart; a scale; the open-access hydrogen processing facility at the University of Birmingham, or a university materials lab, to process and assay the magnets; drives already erased or emptied of data.

birmingham.ac.uk

  1. First step

    Take apart 20 drives of the most common models by hand and weigh their magnets to set a baseline.

  2. Done looks like

    Kilograms of magnet material recovered per 1,000 drives by each route, with its purity, published with the method.

Open 02 · the brief

Secure and still recyclable

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A test of whether some cut shapes meet a given security level while keeping more of the paper's strength. Shred printed office paper in at least five machines rated P-3 to P-6, make laboratory sheets from each output, and measure their strength and fibre length.

Why it is still open

The 2021 study used unprinted kraft pulp sheets cut by hand, not printed office paper from shredders. No published test was found that pairs a shredder's security level with the strength of paper made from its output.

pmc.ncbi.nlm.nih.gov

Built with what exists

Shredders at five levels; a university paper lab with a laboratory sheet former, a tensile tester and a fibre analyzer, using ISO 5269 sheet-making and ISO 1924 tensile methods; the particle-size tool described under Shredding.

  1. First step

    Ask a university paper lab to make and test one batch of sheets from P-4 shreds of printed office paper.

  2. Done looks like

    Tensile strength and fibre length for sheets from each machine's output, published with each machine's measured particle sizes.