Industries / Finance and business services / Records management / Document shredding
Collection
Collection is getting paper and devices from where people work to the shredder: locked bins (called consoles) in offices, scheduled pickups, one-off clear-outs and drop-off events.
5
Milestones achieved, from 1989 to 2019.
1
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1989
Locked bins between visits
Shred-It began operations on 1 February 1989 near Toronto. It shredded at the customer's site, and between visits customers kept material for destruction in secure bins the company supplied. Its first customer was a General Electric plant, and Brophy had about a dozen customers within a month.
Credit
Greg Brophy, Shred-It
2007
First Disposal Rule case
In February 2006 hundreds of loan documents, including credit reports for 36 people, were found in open trash bags around an unsecured dumpster near American United Mortgage Company's office in Northbrook, Illinois. More turned up at least twice after FTC staff warned the company in writing. On 18 December 2007 the company agreed to pay a $50,000 civil penalty and to have an independent security audit every two years for ten years, in what the FTC called its first Disposal Rule case.
LessonThe failure was in the trash before collection, not in any shredder.
Credit
US Federal Trade Commission (FTC)
2009
Pharmacies and open dumpsters
After media reports that CVS pharmacies threw pill bottles with patient names, prescription details, payroll records and credit card information into open dumpsters, the FTC and the US Department of Health and Human Services (HHS) coordinated their investigations. On 18 February 2009 CVS Caremark settled the FTC's charges, and its pharmacy chain agreed to pay HHS $2.25 million, train staff on disposal and have an outside assessor check compliance for three years.
Credit
FTC; HHS
2015
Shredding joins waste haulers
Stericycle, a medical waste company, completed its purchase of Shred-it on 1 October 2015 for $2.3 billion in cash, the largest acquisition in its history. By Stericycle's count, Shred-it brought about 2,400 trucks and 5,400 staff working from more than 200 facilities in 13 countries. WM, the US waste company, completed its purchase of Stericycle on 4 November 2024, at an enterprise value of about $7.2 billion by WM's figure.
Credit
Stericycle; WM
2019
Paper left awaiting destruction
Doorstep Dispensaree, a pharmacy in Edgware, London, left about 500,000 documents holding names, addresses, NHS numbers, medical information and prescriptions in unlocked containers at the back of its premises. In December 2019 the UK Information Commissioner's Office fined it £275,000, the first use of its fining powers under the EU's General Data Protection Regulation (GDPR), as the Law Gazette reported.
LessonMaterial waiting for destruction needs the same locks as material being destroyed.
Credit
UK Information Commissioner's Office (ICO)
Watch for
Bins that report fill level
Sensoneo, a maker of waste sensors, says its ultrasonic sensors let shredding firms track how full confidential bins are while the bins stay locked. It recommends collecting them at about 70% full, so that no one can reach the shredded paper on top. Deutsche Telekom, the logistics firm Rhenus and the Fraunhofer Institute for Material Flow and Logistics announced laser fill sensors for document bins in 2019, with 1,000 containers in test and an initial run of 100,000 planned, as RCR Wireless reported.
Achieved whena shredding firm or an outside party publishes pickup counts and fill data from a deployment, before and after the sensors.
Claimed by
Sensoneo, September 2025
Open
01
Map where disposal fails
A public table of at least 300 enforcement cases, from regulators in at least five countries, in which paper or devices were disposed of badly. Code each case by where it failed: the office bin, storage before pickup, transport, the vendor's plant, resale of devices, or reuse of shreds. Link every field to the regulator's own notice.
The briefCredit · unclaimed02
Open data from locked bins
A low-cost sensor kit, published as open hardware, that mounts under the lid of a locked shred console and reports its fill level once an hour, and a public dataset from at least 50 consoles over three months. Use the data to compare fixed-schedule pickups with pickups when bins reach 70% full. The sensor stays fixed to the lid and never loose in the paper, because batteries must not reach a shredder.
The briefCredit · unclaimed
Open 01 · the brief
Map where disposal fails
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A public table of at least 300 enforcement cases, from regulators in at least five countries, in which paper or devices were disposed of badly. Code each case by where it failed: the office bin, storage before pickup, transport, the vendor's plant, resale of devices, or reuse of shreds. Link every field to the regulator's own notice.
Why it is still open
Each regulator publishes its own cases in prose. HIPAA Journal counts improper disposal breaches in US health care by year, and reports one such breach in 2025, but does not record where in the chain they happened. The FTC and ICO notices cited in this file describe each failure in their own words. Searches in this session found no combined, coded dataset.
Built with what exists
Public notices from the FTC, HHS's Office for Civil Rights, the ICO and EU data protection authorities; an AI agent that extracts the facts and cites the sentence behind each field (see the Note "Findings that cite notes"); a spreadsheet; two human coders.
First step
Code the cases in this file (American United 2007, CVS 2009, Brighton 2010, Affinity 2013, Morgan Stanley 2016, Doorstep 2019) and settle the list of fields.
Done looks like
300 cases, every field linked to a source sentence, two coders agreeing on the failure point in at least 90% of a 50-case sample, and the table published under an open license.
Open 02 · the brief
Open data from locked bins
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A low-cost sensor kit, published as open hardware, that mounts under the lid of a locked shred console and reports its fill level once an hour, and a public dataset from at least 50 consoles over three months. Use the data to compare fixed-schedule pickups with pickups when bins reach 70% full. The sensor stays fixed to the lid and never loose in the paper, because batteries must not reach a shredder.
Why it is still open
Fill sensors for shred bins exist, but they are closed commercial systems, and the published results are the vendors' own, from Sensoneo and from Deutsche Telekom with Rhenus. No public dataset of how fast office consoles fill was found.
Built with what exists
An ESP32 microcontroller board; a time-of-flight distance sensor such as ST's VL53L1X; a LoRaWAN radio with The Things Network, or an LTE-M cellular module; a notebook for analysis.
First step
With the owner's and the shredding firm's permission, fit one sensor in one office console and log a month of readings.
Done looks like
50 consoles logged for 90 days, the dataset published, and the number of pickups a 70%-full rule would have saved or added, with a count of the times a bin was found more than 90% full.