BRENNEN

Industries / Construction and property / Damage restoration

Fire and smoke cleanup

Fire and smoke cleanup is the work of finding where soot, char, ash and smoke odor have reached in a building after a fire inside or nearby, cleaning or removing what they touched, and checking that the cleaning worked.

7

Milestones achieved, from 1990 to 2026.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1990

    Fire sites sorted by risk

    In 1990 Germany's Federal Health Office (Bundesgesundheitsamt) published recommendations for cleaning buildings after fires: visible fire soiling must be removed, and measuring dioxins at each fire is unnecessary. German insurers built their Guidelines for fire damage restoration, VdS 2357, on them; the first edition came out in January 1998 and a revision in April 1998. The 2014 edition sorts a fire site into four hazard areas, from GB 0 (about 1 m² of visible soot, such as from a burned wastebasket or cooktop) through GB 2 (large amounts of plastics such as PVC, for example loaded cable trays) to GB 3 (fires that also involved hazardous substances such as asbestos), and treats any area not yet sorted as GB 3.

    LessonSorting fires by what burned, instead of testing every one, gave crews and insurers one shared scale.

    schadenprisma.derp-giessen.hessen.de

    Credit

    Bundesgesundheitsamt; Gesamtverband der Deutschen Versicherungswirtschaft (GDV) and VdS Schadenverhütung

  2. 2008

    California caps ozone machines

    Restorers run ozone generators, machines that make the reactive gas ozone, in empty buildings to break down smoke odor. The US Environmental Protection Agency (EPA) notes this use in fire restoration, says little is known about the by-products it leaves, and warns that ozone damages rubber, wire coatings, fabrics and some dyes. Under a 2006 state law, AB 2276, the California Air Resources Board (CARB) adopted a rule, final on 18 October 2008, that limits indoor air cleaners sold in the state to 0.050 parts per million of ozone, with certification required from October 2010. Devices sold only through industrial outlets for industrial use, which CARB's staff said includes fire, smoke and mold remediation, are exempt if labeled "Solely for industrial use. Potential health hazard: emits ozone."

    LessonThe ozone machines restorers rely on stayed legal as labeled industrial tools for empty buildings, not as air cleaners for occupied homes.

    ww2.arb.ca.govarb.ca.govepa.gov

    Credit

    California Air Resources Board; Assembly member Fran Pavley (AB 2276)

  3. 2024

    Smoke lingers inside materials

    The Marshall Fire of 30 December 2021 destroyed more than 1,000 buildings in Boulder County, Colorado, and filled many more with smoke. A University of Colorado Boulder team measured volatile organic compounds (VOCs, the carbon-based gases behind much of smoke's smell) in one heavily affected house in Superior with a proton-transfer mass spectrometer, and put simpler sensors in ten more homes. From 10 days after the fire, levels in the house fell slowly over about five weeks, to about 20% of the first indoor value on average. Running air cleaners with activated carbon, or opening windows, each cut average VOC levels by more than half while in use. The authors concluded that the slow decline comes from reservoirs inside materials, not only on surfaces, that keep releasing gas, and noted that one house may not stand for others.

    LessonWiping surfaces may not end smoke odor once the gases have soaked into walls and furnishings.

    pmc.ncbi.nlm.nih.gov

    Credit

    W. D. Dresser, J. M. Silberstein, C. E. Reid, M. E. Vance, C. Wiedinmyer, M. P. Hannigan and J. A. de Gouw, University of Colorado Boulder

  4. 2025

    Smoke cleanup gets standards

    The Institute of Inspection, Cleaning and Restoration Certification (IICRC), a nonprofit that writes standards and certifies restoration technicians, published the first edition of ANSI/IICRC S700, its Standard for Professional Fire and Smoke Damage Restoration, after more than five years of drafting by Restoration & Remediation magazine's account. It covers how to find where fire residues and odors have reached a building, its heating and cooling systems and its contents, and how to clean them, for fires other than wildfires; a separate wildfire standard, S760, is still a draft. The same year the American Industrial Hygiene Association (AIHA) published the second edition of its technical guide for wildfire impact assessments, which grades smoke impact in four levels from background to heavy; AIHA says it was being finished when the January 2025 Los Angeles fires struck and came out shortly after.

    iicrc.orgrandrmagonline.comaiha.orgcihconline.com

    Credit

    IICRC; AIHA, with Enrique Medina as editor

  5. 2025

    Cleaned homes still tested positive

    After the January 2025 Eaton Fire, Eaton Fire Residents United, a residents' group in Altadena, California, compiled test results from 50 homes after cleaning; the tests were run by licensed industrial hygiene firms (specialists in workplace and indoor hazards) and paid for by insurers or owners. In the results released in November 2025, 63% of tested homes had lead on floors above EPA screening levels, and 36% of the homes checked for asbestos tested positive; 78% of the homes had been cleaned by professional remediation companies. The group's data director said methods varied from firm to firm.

    LessonCleaning methods built for wildfires that burn mostly vegetation may fall short in urban fires, whose smoke carries far more heavy metals, as the Caltech geochemist Francois Tissot suggested.

    laist.com

    Credit

    Eaton Fire Residents United; reported by LAist

  6. 2026

    Colorado's smoke study withdrawn

    After the 2021 Marshall Fire, in which some residents got poor cleanup work, Colorado's 2024 law HB24-1315 told the state Division of Insurance to study the cleanup of homes damaged by smoke, soot and ash, weighing IICRC standards, and to report by January 2026. A draft by its contractor, Partners Environmental Consulting, dated 18 November 2025, found that "there is no single source that has established a standard sampling protocol or applicable cleanup standards". After a stakeholder meeting on 18 December 2025 and heavy written criticism from insurer groups and policyholder advocates, the Division let the contract end on 31 January 2026 and took the draft off its website, by the California Department of Insurance's account.

    LessonWithout agreed measurements of clean, a state study of cleanup rules could not get past its first draft.

    insurance.ca.govrandrmagonline.com

    Credit

    Colorado Division of Insurance; Partners Environmental Consulting

  7. 2026

    California writes smoke rules

    The California Department of Insurance counted more than 13,000 claims for standing homes with smoke damage after the January 2025 Los Angeles fires. On 15 September 2026 Governor Gavin Newsom signed AB 1642 and AB 1795, the Smoke Damage Recovery Act, which LAist reported makes California the first state to set smoke damage testing and cleaning standards for insurers. AB 1795 presumes that smoke residue in a surviving home in a ZIP code within or partly within the fire perimeter came from the wildfire, makes the insurer pay for the sampling and testing needed to restore the home, and bars it from ending living-expense payments until the home is restored and cleared for occupancy. It also orders state training and certification for adjusters who assess smoke damage. The state Department of Toxic Substances Control has until the end of 2028 to set testing and cleaning standards for lead and asbestos, and until the end of 2029 for heavy metals and other pollutants.

    leginfo.legislature.ca.govlaist.cominsurance.ca.gov

    Credit

    California Legislature; Assemblymember John Harabedian; Insurance Commissioner Ricardo Lara's Smoke Claims and Remediation Task Force

Watch for

  1. Smoke residue called cleanable

    The IICRC, the Restoration Industry Association (RIA) and the Cleaning Industry Research Institute (CIRI) say in their Technical Guide for Wildfire Restoration, Version 2, of 9 December 2025, that for buildings not reached by flame, radiant heat or the hot smoke plume, "restoration is overwhelmingly a matter of thorough and professional cleaning", and that cleaning has brought deposited wildfire residues down "to typical background levels for decades". The guide names distance from the fire as the most important factor in setting the scope of work.

    Achieved whenan independent group publishes before-and-after results for lead, asbestos and combustion residues from a defined set of cleaned homes after an urban wildfire, with the share that reached background levels.

    insurance.ca.gov

    Claimed by

    IICRC, RIA and CIRI, December 2025

Open

  1. 01

    Test the smoke zones

    A public check of the rules that decide which smoke-exposed homes get tested. Gather lab results (lead dust, asbestos, char and ash) from homes outside the burn area, with locations blurred to the block, and score how well each rule sorts them: California's ZIP-code "wildfire impact zone" in AB 1795, the 6-mile and 12-mile tiers the California Department of Insurance drafted in January 2026, and the distance zones in the AIHA and IICRC guides. Then fit an open model that adds wind during the fire, house age and air leakage, and report whether it sorts homes better.

    The brief
    Credit · unclaimed
  2. 02

    Soot removed, method by method

    A bench test that measures how much of a soot stand-in each common cleaning method removes from common indoor surfaces, and how much harder it gets when cleaning waits. Coupons of new drywall in flat and eggshell paint, sealed and bare wood, vinyl and glass get a fixed dose of a carbon-black-and-oil paste, rest from one day to six weeks, and are then cleaned by HEPA vacuum, dry chemical sponge, damp wipe with neutral detergent, and the three in sequence.

    The brief
    Credit · unclaimed

Open 01 · the brief

Test the smoke zones

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public check of the rules that decide which smoke-exposed homes get tested. Gather lab results (lead dust, asbestos, char and ash) from homes outside the burn area, with locations blurred to the block, and score how well each rule sorts them: California's ZIP-code "wildfire impact zone" in AB 1795, the 6-mile and 12-mile tiers the California Department of Insurance drafted in January 2026, and the distance zones in the AIHA and IICRC guides. Then fit an open model that adds wind during the fire, house age and air leakage, and report whether it sorts homes better.

Why it is still open

The California Department of Public Health told the state task force that the draft mileage cutoffs are "somewhat arbitrary and lack justification", and Colorado's withdrawn draft found no standard sampling protocol. Harvard's Healthy Buildings program wrote in February 2025 that a precise safe distance "isn't possible to give". A field study of 64 homes after New Mexico's 2011 Las Conchas fire found char in 78% of them and up to 50 km away, but fitted no distance rule. François Tissot's lab at Caltech wiped surfaces in 52 houses in February 2025 and found that lead followed the wind path of the Eaton Fire plume and reached homes far from the burn area, in initial findings not yet peer reviewed, but it did not test any zone rule.

insurance.ca.govhealthybuildings.hsph.harvard.eduarc.lib.montana.eduscienceexchange.caltech.edu

Built with what exists

Test results shared by residents' groups such as Eaton Fire Residents United and by industrial hygiene firms, with owners' consent; CAL FIRE fire perimeters; US Census ZIP code tabulation areas; NOAA's HRRR-Smoke model archive for smoke and wind during the fire; county assessor records for the year each house was built; Python with scikit-learn.

  1. First step

    Ask Eaton Fire Residents United whether its post-cleaning results for 50 homes can be shared with addresses blurred, and plot them against the Eaton Fire perimeter.

  2. Done looks like

    At least 300 homes from at least two fires, each with a lab result and a blurred location. For each rule, the share of homes over a screening level that it would have left untested and the share it would have tested with nothing found, published with the code and the anonymized data.

Open 02 · the brief

Soot removed, method by method

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A bench test that measures how much of a soot stand-in each common cleaning method removes from common indoor surfaces, and how much harder it gets when cleaning waits. Coupons of new drywall in flat and eggshell paint, sealed and bare wood, vinyl and glass get a fixed dose of a carbon-black-and-oil paste, rest from one day to six weeks, and are then cleaned by HEPA vacuum, dry chemical sponge, damp wipe with neutral detergent, and the three in sequence.

Why it is still open

Practice rests on field experience. Conservators after the 1990 Royal Saskatchewan Museum fire found that vacuuming, then dry cleaning, then wet cleaning removed the most soot, and that some objects were harder to clean six weeks after the fire than after one, but they published guidance, not measured removal rates. Jia-sun Tsang and Sara Babo of the Smithsonian's Museum Conservation Institute measured soot removal with a colorimeter and gloss meter, but on acrylic artists' paints and with erasers, sponges, bread and non-contact methods suited to art. A study CIRI posted in June 2023 compared two ways of sampling char in 48 houses, not ways of cleaning it. California's task force lists the lack of uniform standards for restoration methods among the causes of disputes. This research found no controlled test of soot removal by method on household surfaces, or of how waiting changes it.

cool.culturalheritage.orgrepository.si.educiriscience.orginsurance.ca.gov

Built with what exists

Artists' lamp black pigment stirred into mineral oil and spread with a film applicator, so no powder gets into the air; a handheld colorimeter to measure how dark each coupon is before and after; clear tape lifts read under a microscope; a HEPA vacuum, dry chemical sponges and a neutral detergent; R or Python for the statistics.

  1. First step

    Paint and soil 30 drywall coupons, clean half after one day and half after one week with a dry sponge, and measure all of them with a colorimeter.

  2. Done looks like

    6 surfaces, 4 methods and 4 waiting times with 5 coupons each (480 coupons), giving the share of soot removed for every combination, the difference between two operators, and all images and readings published.