Industries / Industrial equipment and services / Industrial services / Commercial diving
Dive planning
Dive planning is the work of deciding, before anyone enters the water, how a diving job will be done, by whom and with what safeguards, and of keeping the records that show how it was done.
6
Milestones achieved, from 1977 to 2026.
2
To watch for: announced, not yet confirmed outside.
2
Open deliverables. Nobody has shipped them.
The road
AchievedWatch forOpen
Achieved
1977
US rules for dive jobs
The commercial diving standard of the US Occupational Safety and Health Administration (OSHA), 29 CFR 1910 Subpart T, was published on 22 July 1977. It requires each dive team member to be trained for the tasks assigned, and requires the planning of every dive to assess the diving mode, surface and underwater hazards, breathing gas and reserves, decompression and emergency procedures, and to coordinate the dive with other work nearby. On 16 July 1979 the Fifth Circuit Court of Appeals, in a case brought by members of the Association of Diving Contractors (Taylor Diving & Salvage v. US Department of Labor), struck down the standard's medical section, under which a diver found unfit could seek a second and a third doctor's opinion that the employer then had to accept, and upheld its rule on employees' access to records. OSHA deleted the medical section on 6 January 1984.
Lessonthe court held that a safety standard may not be used to regulate job security.
Credit
OSHA; US Court of Appeals for the Fifth Circuit
1998
Written plans, named supervisors
Britain's Diving at Work Regulations 1997, in force from 1 April 1998 in place of the 1981 regulations, require the diving contractor to prepare a diving project plan before work starts, to appoint the supervisor of each diving operation in writing, to provide enough competent people and equipment for the job and for any foreseeable emergency, and to keep a record of each diving operation for at least two years.
Credit
UK government (Diving at Work Regulations 1997)
2012
A drift parts an umbilical
In September 2012 the dive support vessel Bibby Topaz lost dynamic positioning (DP), the computer control of its thrusters that holds a ship over one spot, while two saturation divers worked inside a drilling template in 90 m of water in the North Sea. As the ship drifted, one diver's umbilical, the bundle of hoses and cables that carries breathing gas, hot water and the voice link, snagged on the template and parted. The other diver brought the injured diver back to the diving bell, unconscious, after about 40 minutes, and the injured diver made a full recovery. The joint investigation found that the data bus shared by the DP system's computers had jammed, and the UK Health and Safety Executive (HSE) warned makers that a single fault in such a dual-bus network can disable a system meant to survive any single failure.
Lessontwo computers that share one communication line can fail together, so redundancy has to be checked down to the wiring.
Credit
Bibby Offshore and the vessel's crew; investigation reported by IMCA and HSE
2023
Umbilicals in three dimensions
The International Marine Contractors Association (IMCA) published a revised code for diving from DP vessels (IMCA D010 Rev. 4) on 4 July 2023 and moved its umbilical rules into a new document, IMCA D078. IMCA says poor umbilical management has been a significant cause of many serious diving incidents, and that D078's formulae, diagrams and worked examples model the full three-dimensional problem of how long a diver's umbilical may be, so that the diver cannot reach hazards such as thrusters, for the first time in industry guidance.
Credit
IMCA
2024
Passing ships slow down
The UK Maritime and Coastguard Agency's notice MGN 696, published on 21 March 2024 in place of MSN 1221, tells ships that cannot pass at least 0.5 nautical miles from a DP vessel showing diving signals to slow down so that their wash does not push it. It tells DP diving vessels to keep a proper lookout and to cover restricted visibility in their activity-specific operating guidelines, the tables that say when work must stop.
Credit
Maritime and Coastguard Agency
2026
Rules for decommissioning dives
IMCA published guidance in 2026 on diving to support the removal of old offshore structures, some nearing 50 years old and with incomplete records. It says incidents in this work are often linked to assumptions about an asset's condition or to outdated information, puts weight on managing changes to scope and method, and tells contractors to challenge whether diver intervention is needed and to consider remote systems where reasonably practicable.
Credit
IMCA
Watch for
One diving rule for Canada
The Canadian Association of Diving Contractors (CADC) says Canada has 13 separate regulatory systems for occupational diving, and it is leading a project to have every jurisdiction adopt the CSA Z275 standards, finishing work begun in a 1997 national harmonization project. It also says the 2026 edition of CSA Z275.2, the national safety code for diving operations, defines underwater construction sites, restricts scuba and sets minimum crews for scuba and surface-supplied diving.
Achieved whenCSA Z275.2-26 is published and every province, territory and the federal government has adopted it, by reference in regulations or as an enforceable code.
Claimed by
CADC, November 2025 and May 2026
Logbooks checked by software
The Association of Diving Contractors International (ADCI) says it now reviews applicants' logbook entries and CVs digitally on the Skill N Depth platform to catch forged documents, and The Maritime Executive reports that checks which could take up to 60 days now take days. ADCI counts 8,699 active diving personnel in its database.
Achieved whenADCI publishes verification times and the number of forged records caught, or an outside audit confirms them.
Claimed by
ADCI and Skill N Depth, March 2026
Open
01
Umbilical lengths checked by code
Free, open software that takes the position of a dive vessel's bell or diver basket, a 3D model of the seabed structures, the hazards around them (thrusters, other lines, moving equipment) and the vessel's allowed movement, and returns the longest umbilical each diver may have, following the method in IMCA D078. It ships with a test suite built from D078's worked examples and from the Bibby Topaz layout, and is marked as a study tool, not for planning real dives.
The briefCredit · unclaimed02
A dive record from radio
A tool that takes the recorded radio between the surface and a diver over a whole air dive and drafts the narrative part of the dive record: tasks begun and finished, problems reported and instructions given, each with its time, for the supervisor to check and sign.
The briefCredit · unclaimed
Open 01 · the brief
Umbilical lengths checked by code
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
Free, open software that takes the position of a dive vessel's bell or diver basket, a 3D model of the seabed structures, the hazards around them (thrusters, other lines, moving equipment) and the vessel's allowed movement, and returns the longest umbilical each diver may have, following the method in IMCA D078. It ships with a test suite built from D078's worked examples and from the Bibby Topaz layout, and is marked as a study tool, not for planning real dives.
Why it is still open
IMCA says D078 models the three-dimensional problem for the first time and that there is "no room for error", but its method and worked examples sit in a document sold to members and others. An IMCA safety flash from 2021 describes umbilicals whose distance markings used the wrong colour code and had been measured from the wrong end. GitHub searches for "umbilical length" and "excursion umbilical" in November 2026 returned no code, and the dive-planning code found there, such as dive-stopwatch, times decompression from US Navy tables rather than working out umbilical geometry.
Built with what exists
IMCA D078, bought from IMCA; Python with the trimesh library for distances between 3D shapes; FreeCAD to model a sample template and jacket; Streamlit for a simple interface; two experienced dive supervisors to check results.
First step
Code D078's plan-distance and true-distance calculations and run the first worked example.
Done looks like
The software matches every D078 worked example to within 0.1 m, and on ten test layouts it flags every hazard the two supervisors find by hand and never clears a length they reject.
Open 02 · the brief
A dive record from radio
The first to publish is credited on this line, and the deliverable moves from Open to Achieved.
What to build
A tool that takes the recorded radio between the surface and a diver over a whole air dive and drafts the narrative part of the dive record: tasks begun and finished, problems reported and instructions given, each with its time, for the supervisor to check and sign.
Why it is still open
UK law requires a record of every diving operation (see Achieved). New dive control panels log depth and gas by themselves: Phoenix International says its Novasub system logs real-time dive data for several divers (January 2026), and Unique Group's Diver Control Center sent dive data straight into a Skill N Depth digital logbook in April 2025. What was said and done is still written down by hand. Speech recognition of divers has been tested only on short clips: a Curtin University team fine-tuned the Whisper model on 41 sentences spoken by a diver, each under 4 seconds long, and reached a word error rate of 2.4% (OCEANS 2025), and a Teledyne patent granted in November 2024 describes adapting recognition to speech in helium-oxygen gas. No test of transcribing whole dives' radio and scoring the result against the supervisor's record was found.
phnx-international.comuniquegroup.comddfe.curtin.edu.aupatents.google.com
Built with what exists
ElevenLabs Scribe v3 (see the Note "Fewer word errors") and OpenAI's Whisper as transcribers; a language model that pulls out each event and quotes the line it came from (see the Note "The jobs agents repeat"); recordings and written records of training dives from a commercial diving school, shared with consent.
First step
Ask a commercial diving school for five recorded training dives with their written records, and transcribe one by hand as the reference.
Done looks like
30 recorded dives transcribed, with the word error rate for each published, and drafted records that contain at least 90% of the events in the supervisors' own records, each within one minute of the logged time, as judged by two supervisors.