BRENNEN

Industries / Consumer goods / Candles and home fragrance

Wicks

Wick work is braiding, treating and sizing the cotton or other fibre cord that draws melted wax up to the flame, so that a candle burns steadily without smoking or drowning.

6

Milestones achieved, from 1400s to 2018.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1400s

    Wicks had to be snuffed

    For centuries a wick was a single strand of linen, the pith of a rush, or cotton strands twisted together. A twisted wick did not bend out of the flame, so its charred end built up and had to be cut off with snuffers, scissors made for the job. The Victoria and Albert Museum says snuffers are first recorded in the 15th century, and that new designs were patented again and again from the mid-1700s.

    LessonA wick that cannot burn itself away makes every candle something that has to be tended.

    api.vam.ac.ukblog.nationalmuseum.ch

    Credit

    unnamed chandlers and snuffer makers

  2. 1825

    Plaited wick trims itself

    A flat plaited, or braided, cotton wick curls over as it burns, which puts its tip in the hottest part of the flame, where it burns away. The V&A credits the self-trimming plaited wick to Joseph Cambacères in 1825, after which snuffers were not needed for trimming. The Swiss National Museum dates soaked or treated cotton wicks to the 1820s.

    api.vam.ac.ukblog.nationalmuseum.ch

    Credit

    Joseph Cambacères

  3. 1911

    Wicks treated and matched

    By 1911 commercial wicks were braided by machine and "pickled", soaked in boric acid, ammonium or potassium nitrate or other salts, so the tip would burn away fully. The braid was made tighter or looser to suit each fuel, looser for stearin than for paraffin. Wick makers still sell named treatments: the German maker Wedo lists P10, P15 and P102 for its Stabilo series.

    LessonWick and wax work as one system; in November 2023 the US Consumer Product Safety Commission (CPSC) announced a recall of Magnolia 3-wick candles "manufactured with the incorrect wax", which can cause excessive flames.

    en.wikisource.orgtopwosk.plsaferproducts.gov

    Credit

    19th-century wick makers; today firms such as Wedo (Westdeutsche Dochtfabrik, Nettetal, since 1954) and Atkins & Pearce (Covington, Kentucky)

  4. 2001

    Wooden wicks patented

    In November 2001 DayNa Decker filed a US patent application for a candle with a flat wick that may be made of wood; it claims a crackling sound and less soot than ordinary wicks. Later wooden wick patents, including Melynda Delcotto and Justin Damiani's 2006 design with a "booster" strip, are licensed by Lumetique, Inc. to suppliers that sell them to candle makers.

    patents.google.compatents.google.commakesy.com

    Credit

    DayNa Decker; Melynda Delcotto and Justin Damiani; Lumetique, Inc

  5. 2003

    Lead wicks banned after pledge

    Some wicks had a lead core to keep them upright. US candle makers pledged in 1974 to stop using lead cores, but some wick makers went back to them: a 1999 survey found detectable lead in the wicks of 3% of candles sampled, and a 2002 study found lead wicks in 8% of candles bought, giving off 100 to 1,700 micrograms of lead per hour. The CPSC banned wicks with more than 0.06% lead in the metal from 15 October 2003, after Australia, New Zealand and Denmark had acted. Cores of zinc, paper, cotton, hemp or plastic took the job. A Danish EPA report says Europe had stopped using lead cores in the 1980s.

    LessonA voluntary pledge with no testing did not hold, and a number in a rule did.

    govinfo.govebi.ac.ukwww2.mst.dk

    Credit

    US CPSC; Wasson and colleagues (2002 study)

  6. 2018

    Wick salts dominate particles

    A Danish Environmental Protection Agency project burned five candle types, three of each, steadily and out of draughts. Water-soluble salts used to treat wicks, ammonium phosphates and sulphates, made up "virtually the entire emitted particle mass" of some candles, and black carbon, the marker for soot, was only 0.46 to 1.5% of the particle mass.

    LessonIn still air, the wick's chemical treatment rather than the wax can set the particle load.

    www2.mst.dk

    Credit

    Danish Technological Institute for the Danish EPA, with the European Candle Association and candle makers among the editors

Watch for

  1. Paired wicks that curl apart

    Fil-Tec Holdings was granted a US patent in March 2026 for pairs of knitted candle wicks joined by a "ladder" filament, so that as they burn the two tips curl outward, away from each other. Multi-wick jars feature in several recent US recalls for flames burning too high or too close to the glass.

    Achieved whencandles using the wicks are on sale and an independent test lab reports their flame heights and melt pools against ASTM F2417 or EN 15493.

    patents.google.com

    Claimed by

    Fil-Tec Holdings Inc (US 12,570,922 B2), March 2026

Open

  1. 01

    Open wick-sizing dataset and model

    A public dataset of measured burns across wick series and sizes, waxes and jar diameters. Each burn records burn rate, flame height, melt pool diameter (the width of the liquid wax) and jar temperature over the candle's whole life. Alongside it goes a simple model that suggests the wick size for a new wax, fragrance load and jar.

    The brief
    Credit · unclaimed
  2. 02

    What wick salts add

    A measured comparison of the particle mass, and what the particles are made of, from one wax burned with different wick series and chemical treatments.

    The brief
    Credit · unclaimed

Open 01 · the brief

Open wick-sizing dataset and model

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A public dataset of measured burns across wick series and sizes, waxes and jar diameters. Each burn records burn rate, flame height, melt pool diameter (the width of the liquid wax) and jar temperature over the candle's whole life. Alongside it goes a simple model that suggests the wick size for a new wax, fragrance load and jar.

Why it is still open

Wedo gives its suggested diameters "as a starting point for testing purposes only", and CandleScience calls its chart "estimates only". The largest public set found, from the UK supplier Supplies for Candles (over 700 samples), records the wick chosen and photos, not measurements. A 2025 patent application says burn testing is "performed entirely manually" and "can vary between testers". Of 13 candle recalls in the CPSC recall database from January 2023 to February 2026, six cite flames burning too high, flame spreading from the wick or wicks burning too close to the glass (count made for this page).

topwosk.plcandlescience.comdocs.google.compatents.google.comsaferproducts.gov

Built with what exists

The burn rig described under Safety testing (a 5 kg load cell with an HX711 amplifier, a webcam with OpenCV for flame height and pool diameter, K-type thermocouples and a Raspberry Pi logger); FlameWatcher, an open flame tracker posted on GitHub in 2026, and WickBench, an open tool from 2026 that computes burn metrics from logged measurements, as starting points; scikit-learn for the model. Candles are burned attended, on a non-combustible tray.

  1. First step

    Build one load-cell-and-camera station, burn one wax in a 75 mm jar with five sizes of one wick series, and post the raw files.

  2. Done looks like

    At least 300 full-life burns (for example 3 waxes, 3 wick series, 5 sizes and 3 jar diameters, plus repeats) published on Zenodo with video; a model that, given wax, fragrance load and inner jar diameter, picks a wick that reaches a full melt pool by the end of the second 4-hour burn without passing a flame-height limit set in advance, in at least 24 of 30 new candles poured by someone else.

Open 02 · the brief

What wick salts add

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A measured comparison of the particle mass, and what the particles are made of, from one wax burned with different wick series and chemical treatments.

Why it is still open

The Danish EPA study found that wick-treatment salts made up nearly all the particle mass of some candles, and asked for "more knowledge which type of emission can be reduced with which modification of the candles design or composition". Wick makers publish treatment codes, such as Wedo's P10, P15 and P102, but no particle data per treatment was found.

www2.mst.dktopwosk.pl

Built with what exists

One pillar wax and four to six commercial wick series; Sensirion SPS30 sensors checked against a reference instrument; PTFE filters with a small sampling pump; filters sent to an accredited lab for ion chromatography (ammonium, phosphate and sulphate) and black carbon; the EN 15426 glass-plate soot test; a 0.01 g balance.

  1. First step

    Buy matched sizes of three wick series with different listed treatments, pour nine identical pillars, and get a lab quote for ion chromatography on 20 filters.

  2. Done looks like

    At least 4 wick series, 2 sizes each and 3 candles per size, with particle mass per gram of wax burned, the salt share of that mass and the soot index for each wick, each with a 95% confidence interval, published with the lab reports.