BRENNEN

Industries / Media, arts and recreation / Bowling and family entertainment centers

Lane care and repairs

This work keeps lanes and machines in playing order: cleaning and oiling the lanes, keeping their surfaces flat and repairing the pinsetters behind them.

6

Milestones achieved, from 1966 to 2023.

1

To watch for: announced, not yet confirmed outside.

2

Open deliverables. Nobody has shipped them.

The road

AchievedWatch forOpen

Achieved

  1. 1966

    Lane doctoring is banned

    Lane oil, called dressing or conditioner in the trade, protects the surface and controls how much a ball hooks. In the 1960s some centers applied it to steer balls toward the pocket, the spot between pins where a strike is most likely, a practice called blocking. Bowling magazine ran the headline "Doctoring of Lanes Danger to Bowling" in September 1966, and the ABC convention that year passed an amendment that "the lane surface shall not be altered or conditioned to create a ball path," by USBC's account. Blocking went on. In 1976 the ABC gained the power to withdraw certification from those who kept blocking lanes, and it required oil to be spread evenly from gutter to gutter.

    LessonA rule with no way to measure compliance did not stop the practice for a decade.

    images.bowl.com

    Credit

    American Bowling Congress; the Bowling Proprietors' Association of America (BPAA), which backed the fight in a 1973 resolution

  2. 1986

    Oil measured, not guessed

    To enforce oil rules, inspectors needed to see the oil. In 1982 Brunswick commissioned the University of Illinois to develop a device that measures lane dressing. An ultraviolet (UV) additive in lane oil was mandated for the 1985–86 season, and an official lane dressing inspection device followed in 1986, USBC says. An inspector "takes tapes," pressing a strip about an inch wide onto the lane, and an optical reader measures how much UV additive each board left on the tape. USBC defines one unit of oil as 0.0167 milliliters of dressing per square foot, just over seven millionths of an inch thick.

    images.bowl.combowl.com

    Credit

    Brunswick; University of Illinois; American Bowling Congress and Women's International Bowling Congress

  3. 1991

    A machine walks the lanes

    A lane machine strips old oil off and lays down a pattern, the planned shape of oil across and down the lane. John Davis founded Kegel in Florida in 1981, after developing a lane-cleaning tool called The Key, with the goal of making "two lanes play the same," says USBC, which inducted him into its Hall of Fame in 2019. Kegel says its DBA LaneWalker, released in 1991, moved from lane to lane on its own so that staff could do other work while it cleaned and oiled, and its timeline lists battery-powered machines from 2005. USBC credits Davis with the LaneMapper, his last invention, which measures lane topography, and says Kegel was the first independent lane maintenance company to oil the lanes for the PBA Tour.

    bowl.comkegel.net

    Credit

    John Davis, Linda Davis and David Jennings, Kegel

  4. 2015

    Killed inside the machine

    A pinsetter is full of shafts, belts and moving tables that can catch clothing. On 5 March 2015 Vidal Garcia, 29, a part-time mechanic at Galaxy Bowling Center in Brownsville, Texas, was strangled when his shirt collar tangled in a pinsetter that he had crawled into while it was running. OSHA, the US workplace safety regulator, cited the center for 10 serious violations, among them having no program to keep machines from starting during maintenance and leaving rotating shafts unguarded. In 2011 OSHA had cited AMF Bowling Centers after a worker at its Addison, Texas, center was killed clearing a jam, including repeat violations for missing machine guards for which it had cited the company in 2007 and 2008.

    LessonA pinsetter must be switched off and locked out before anyone reaches in, and repeat citations show that the rule is not kept unless it is checked.

    ehstoday.comclaimsjournal.com

    Credit

    Occupational Safety and Health Administration (OSHA)

  5. 2019

    The oil rule is dropped

    In 1992 the ABC adopted the three-unit rule: oil could be laid in any amount and to any distance as long as every board had at least three units, and it became the only standard rule on oil patterns. On 23 June 2019 USBC said its research showed that modern bowling balls change a pattern so much that "most patterns likely do not comply with the three-unit rule by the end of a league session," and it suspended the rule from 1 August 2019, which ended the yearly lane dressing reports that local associations had filed for each center. In September 2024 USBC reported, from the averages it collects each season, that scoring had not changed meaningfully since the suspension and that reports of 300 games and 800 series had not increased.

    LessonA rule checked once a year, at the moment oil goes down, could not govern a surface that changes with every ball.

    bowl.combowl.com

    Credit

    USBC Equipment Specifications Committee

  6. 2023

    Every center gets measured

    In January 2023 USBC began sending its own national lane inspectors to check every certified center against its physical lane and pit specifications, using a tool it calls the Automatic Certification Evaluation (ACE): a precision-machined frame with digital sensors that measures lane topography. By May 2025 more than 2,600 centers had been inspected. About 73% met at least 90% of the specifications and 2% met less than 70%. USBC then sorted centers into Gold, Silver, Bronze and Standard tiers, moved inspections from every three years to every five from 2026, cut the fee from $10 to $8 per lane per year, and decided not to publish any center's tier.

    bowl.comimages.bowl.com

    Credit

    USBC

Watch for

  1. Strings without a mechanic

    Kirk Manes of Andy B's Bowl Social says that three to five people were needed to keep the chain's old free-fall machines running, that they were moved to other jobs after the change to Boost ST string pinsetters, and that the center's 18-year-old party hostess, with minimal training, untangled a string by herself. He describes going "from thousands of parts to a 250-piece machine with almost no maintenance." The PBA, testing certified string machines from both QubicaAMF and Brunswick, found that they still need "someone on-site to handle tangles," though "a full-time mechanic is not necessary."

    Achieved whenan outside study logs staff hours spent on pinsetters per 1,000 games at several centers before and after conversion.

    brunswickbowling.compba.com

    Claimed by

    Andy B's Bowl Social, in a story republished by Brunswick, July 2025

Open

  1. 01

    Fault guide for old pinsetters

    A question-and-answer guide for the oldest machines still in service, such as the AMF 82-30 and 82-70 and the Brunswick A-2. A mechanic types a fault in plain words, for example "table will not come down after a strike," and the guide returns likely causes and checks, each with a page reference in the machine's service manual. It is tested on written fault cases graded by experienced mechanics, at a desk; it never replaces switching off and locking out a machine.

    The brief
    Credit · unclaimed
  2. 02

    A cheap lane topography gauge

    A low-cost, open gauge that maps a lane's crosswise tilt, dishes and crowns: a rolling straightedge carrying a high-resolution inclinometer and a distance counter, with software that prints a board-by-board map in the thousandths of an inch that USBC's specifications use.

    The brief
    Credit · unclaimed

Open 01 · the brief

Fault guide for old pinsetters

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A question-and-answer guide for the oldest machines still in service, such as the AMF 82-30 and 82-70 and the Brunswick A-2. A mechanic types a fault in plain words, for example "table will not come down after a strike," and the guide returns likely causes and checks, each with a page reference in the machine's service manual. It is tested on written fault cases graded by experienced mechanics, at a desk; it never replaces switching off and locking out a machine.

Why it is still open

The makers' troubleshooting apps cover newer, networked machines. Brunswick's Pronto works only with its Sync scoring system and GS-series or string pinsetters, and QubicaAMF's Tech Wizard works through its Conqueror center software. Brunswick now refers A-2 owners to training run by the BPAA with Classic Bowling Products. A Minneapolis mechanic keeping 65-year-old AMF machines running told Racket in 2025 that he stockpiles parts from centers that change to new machines and that their replacement circuit boards are "only repaired by one or two people in the country." General tools that answer questions from manuals exist: MaintainX, a maintenance software company, offers an AI assistant over the manual for QubicaAMF's EDGE String pinsetter, a new machine, but publishes no test of its answers. Brunswick posts its July 1963 service manual for the A and A-2 pinsetters online, but as a scanned image with almost no machine-readable text. GitHub holds service-log and maintenance-schedule apps for these machines, but no fault guide.

apps.apple.comapps.apple.combrunswickbowling.comracketmn.comgetmaintainx.combrunswickbowling.comgithub.com

Built with what exists

Service manuals the center owns or the makers post, run through optical character recognition (OCR) such as Tesseract where they are scans; a language model that can read long documents and cite pages (see the Note "The jobs agents repeat"); a small test harness in Python; a shared spreadsheet for the mechanics' grades.

  1. First step

    Ask three mechanics to write down the last ten faults they fixed and what fixed them, and check that the manual for one machine model is complete and legible.

  2. Done looks like

    100 written fault cases collected from working mechanics, each with the fix that worked, and a guide that names the right cause among its top three answers for at least 80 of them, as judged by two mechanics who did not build it. Cases, grades and code are published.

Open 02 · the brief

A cheap lane topography gauge

Credit · unclaimed

The first to publish is credited on this line, and the deliverable moves from Open to Achieved.

What to build

A low-cost, open gauge that maps a lane's crosswise tilt, dishes and crowns: a rolling straightedge carrying a high-resolution inclinometer and a distance counter, with software that prints a board-by-board map in the thousandths of an inch that USBC's specifications use.

Why it is still open

The tools that map topography are Kegel's LaneMapper, sold commercially, and USBC's ACE frame, which only its inspectors use. From 2026 USBC inspects each center once every five years and does not publish the results. Lou Trunk described measuring the 1989 tournament lanes by hand with a level, which took him three days. A GitHub search for "lane topography" found no open project.

bowl.combowl.com11thframe.com

Built with what exists

An aluminum straightedge; an inclinometer chip such as the Murata SCL3300; an ESP32 microcontroller with a wheel encoder; Python with NumPy and Matplotlib.

  1. First step

    Build a one-meter test bar and compare its readings with a machinist's level on a granite surface plate, then on one lane at a center that has a recent LaneMapper report.

  2. Done looks like

    On 10 lanes already mapped by a LaneMapper or by USBC's ACE, the gauge's crosswise readings agree within 0.005 inch at 95% of points, and one lane takes under 30 minutes to map.